Shop our Airplanes Products Drone Products Sales
Thread Tools
Aug 11, 2011, 08:25 PM
Suspended Account
Maybe I just can't get my TX right. I'm going to remove expos.
Sign up now
to remove ads between posts
Aug 11, 2011, 10:31 PM
Registered User
wheelspinner20's Avatar
what values do you have the rates set at???
Aug 11, 2011, 10:33 PM
Suspended Account
Quote:
Originally Posted by wheelspinner20 View Post
what values do you have the rates set at???
D/R and Expo (according to my TH9X)

Elev 85 switch on 50

Ail 85 switch on 50

Expo 20% for both controls.
Aug 11, 2011, 10:38 PM
Registered User
wheelspinner20's Avatar
And you measured the elevon throw at 3/8ths when its at the 85%?
Aug 11, 2011, 10:40 PM
Suspended Account
Quote:
Originally Posted by wheelspinner20 View Post
And you measured the elevon throw at 3/8ths when its at the 85%?
Kinda. The best I did. Is this supposed to be 3/8ths up from center stick and 3/8ths down from center stick? (wherever your elevons are trimmed)

These are the other settings on my transmitter:

Elevon

Ail1 100 100
Ail2 100 100
Ele1 100
Ele2 -100

E.Point
Ail 75% 75%
Ele 75% 75%
Aug 11, 2011, 10:42 PM
Lee
Lee
PERFECT LANDING !!!
Lee's Avatar
Quote:
Originally Posted by Bear_Pants View Post
D/R and Expo (according to my TH9X)

Elev 85 switch on 50

Ail 85 switch on 50

Expo 20% for both controls.
I don't like expo programed into the mixing on my wings.

I recently discussed on the Assassin thread that one of the young new flyers got help from a member of our club who programed his radio with expo. The 13 year old flyer later came to me for more help and when I put his plane up I felt like it was out of control. I wasn't surprised he couldn't fly it. It didn't feel like it was doing what I was telling it to do.

I had to make major movement in the sticks to get a small amount of control and then it would all at once grab hold. I thought something was wrong with his linkages but a ground test showed it was the expo programing. I took all the expo out of his programing and he instantly felt in control of the plane.

I like to make the decision of how the plane is behaving and don't like the radio modifying my inputs. I rarely use expo but will occasionally program in some dual rates for high speed rolls and other stunts.

I like to use two fingers on the sticks and not fly with the thumbs instead of using exponential programing and teach that to all of the flyers I assist.
Aug 11, 2011, 10:44 PM
Suspended Account
I'll see how she feels tomorrow without expo. I also edited my post. You ninja'd me.

Do you guys have a choice to use PCM or PPM on your transmitters? If so which do you use?
Aug 11, 2011, 10:46 PM
Planes in flames,,,
jetpackninja's Avatar
Hehehe- wait, what?
Aug 11, 2011, 10:49 PM
Registered User
wheelspinner20's Avatar
Oh boy,.... ya don't change that!

PPM is the standard pulse mode for 2.4 ghtz. pcm is the standard for the 72 mhtz frequencies.
Aug 11, 2011, 10:49 PM
Registered User
wheelspinner20's Avatar
Quote:
Hehehe- wait, what?
rofl, thats what I said
Aug 11, 2011, 10:55 PM
Planes in flames,,,
jetpackninja's Avatar
Hey Lee, You mentioned that the blue motor from HobbyPartz has a different bolt pattern than the 3530 that we use from Hobbyking.
Can you elaborate a little?
So does it still fit (without modification) the motor mount that you ship with the crashtesthobby planes?
Are you using one and if so what do you think?
Aug 11, 2011, 11:02 PM
TREES!!! Ouch!!!
ROCKY2's Avatar
hey lee a couple more vids
crash test hobby grim reaper flying at 3 pounds 5.2 ounces (2 min 38 sec)

FPV Breaking Formations (3 min 41 sec)
Aug 12, 2011, 07:05 AM
"Still Crashing since 1960"
rcairnut's Avatar
Quote:
Originally Posted by Lee View Post
I don't like expo programed into the mixing on my wings.


I like to make the decision of how the plane is behaving and don't like the radio modifying my inputs. I rarely use expo but will occasionally program in some dual rates for high speed rolls and other stunts.
This is exactly what I have found, I know when I was a kid one good controlled flight was a good day, (I have been around so to say) but I have tried all the latest stuff as it has come out for decades and most of it is good, BUT for me expo in most planes never fully lived up to it press, and is a hindrance to the "feel" of a plane on the sticks.
Answer me this riddle;
Why do people buy $100 servos each (or more) used with a radio with the maximum number of steps (max resolution) fantastic high quality gimbals for smoothness and perfect control and run tones expo! I have seen this exact setup more than you think.

nut
Aug 12, 2011, 07:10 AM
Suspended Account
Quote:
Originally Posted by rcairnut View Post
this is exactly what i have found, i know when i was a kid one good controlled flight was a good day, (i have been around so to say) but i have tried all the latest stuff as it has come out for decades and most of it is good, but for me expo in most planes never fully lived up to it press, and is a hindrance to the "feel" of a plane on the sticks.
Answer me this riddle;
why do people buy $100 servos each (or more) used with a radio with the maximum number of steps (max resolution) fantastic high quality gimbals for smoothness and perfect control and run tones expo! I have seen this exact setup more than you think.

Nut
somebody get this man an answer, stat
Aug 12, 2011, 10:03 AM
"Still Crashing since 1960"
rcairnut's Avatar
Quote:
Originally Posted by Bear_Pants View Post
stat
LOL
I am a network admin in a hospital

nut


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Reaper GR60 Stagger_Wing Aircraft - Electric - Power Systems (FS/W) 0 Jan 13, 2010 01:43 AM
Sold Reaper GR 60 wrpsr1911 Aircraft - Electric - Power Systems (FS/W) 0 Jan 06, 2010 09:28 PM
Build Log House of Balsa "Grim Reaper" P51 Mustang Gun Jam Electric Warbirds 28 Dec 20, 2009 03:25 PM
Discussion Body count... Grim but it's really gotta be done. Bilbobaker Life, The Universe, and Politics 15 Nov 15, 2009 01:09 PM
Gallery Grim reaper Wickett R/C Pumpkin Contest 1 Oct 31, 2005 04:37 PM