Dec 06, 2012, 09:46 AM
Registered User
DamonH's Avatar
Quote:
Originally Posted by AndyKunz View Post
Since you're on 2.04, it's super easy.

Just let it do it automatically all the time.

Andy
Thanks!
Sign up now
to remove ads between posts
Dec 06, 2012, 09:51 AM
Look Up
CiprianGugu's Avatar
Quote:
Originally Posted by itsme2 View Post
After two days of being hooked up to the factory charger for the initial charge I got the 5.5V reading, is this correct or should I be concerned?
If you left it on the charger for 2 days, you might have cooked the battery. The way to charge the stock NiMH battery on the stock charger is to feel it from time to time, and if it gets warm it is charged.
Just take the battery out and look at it for any signs of leakage or something else unusual.
Dec 06, 2012, 10:08 AM
AMA 84248 since 1964
itsme2,
CiprianGugu is correct, I cooked mine overnight... Do yourself a REALLY big favor and order this:


http://www.hobbyking.com/hobbyking/s...dProduct=19481

I charge the transmitter every other week if that... sometimes I go the whole month.. AND I have turned the back light on to continuous..

KKKKFL
Dec 06, 2012, 10:46 AM
Registered User
Quote:
Originally Posted by CiprianGugu View Post
If you left it on the charger for 2 days, you might have cooked the battery. The way to charge the stock NiMH battery on the stock charger is to feel it from time to time, and if it gets warm it is charged.
Just take the battery out and look at it for any signs of leakage or something else unusual.
The initial charging instructions I received with the DX8 said it could take up to 30 hours on the iniitail charge, I didin't have it on the charger much over that and the pack was warm when I took it off the charger. Pack is not leaking or bulged. What is the correct voltage for a fully charged DX8 pack, is 5.5V within the correct range?

Thank you.
Dec 06, 2012, 11:06 AM
Surface, Air & Water Rc Toys..
freechip's Avatar
The 30 hrs is for the lipo I believe.

The charging instructions you got with your radio (manual) are.
Quote:
Originally Posted by DX8 Manual
You should plug the included 12-volt AC to DC power supply in for 10 to 12 hours to fully charge the battery.
The 30hrs is for the lipo
Quote:
Originally Posted by DX8 Manual
When charging the optional SPMB4000LPTX, a full charge can take up to 30hrs depending on the initial charge state of the battery.
Last edited by freechip; Dec 06, 2012 at 11:16 AM.
Dec 06, 2012, 11:07 AM
Registered User
Quote:
Originally Posted by itsme2 View Post
The initial charging instructions I received with the DX8 said it could take up to 30 hours on the iniitail charge, I didin't have it on the charger much over that and the pack was warm when I took it off the charger. Pack is not leaking or bulged. What is the correct voltage for a fully charged DX8 pack, is 5.5V within the correct range?

Thank you.
The 30 hours are only valid for the LiPo. Since it is a 4000mAh one and is charged with 200mA (maximum, at the end less), it can take this long. The NiMH is full after maximum 14hrs (200mA charging current, 2000mAh battery).
Normally NiMH should stand overcharging with 1/10c. They get warm. But you better keep an eye on them.
Dec 06, 2012, 11:47 AM
Look Up
CiprianGugu's Avatar
Quote:
Originally Posted by itsme2 View Post
The initial charging instructions I received with the DX8 said it could take up to 30 hours on the iniitail charge, I didin't have it on the charger much over that and the pack was warm when I took it off the charger. Pack is not leaking or bulged. What is the correct voltage for a fully charged DX8 pack, is 5.5V within the correct range?

Thank you.
I am not at home, but I will see what mine says. I think that mine shows a bit more than that when fully charged.
Dec 06, 2012, 12:21 PM
Registered User
GBRellic's Avatar
Quote:
Originally Posted by itsme2 View Post
The initial charging instructions I received with the DX8 said it could take up to 30 hours on the iniitail charge, I didin't have it on the charger much over that and the pack was warm when I took it off the charger. Pack is not leaking or bulged. What is the correct voltage for a fully charged DX8 pack, is 5.5V within the correct range?

Thank you.
5.5V is the average full charge reading I get, sometimes 5.6, sometimes 5.3, depending on my morning before flying charge time. I fly weekly year round and multiple times during the week in warmer months (above 0)
I have been using this original NMH since Dec 2010 and consistently charge for one to two hours on flying day mornings.

Plug TX in, walk the Dog, load the truck, make a samich to go, grab TX and I'm outa here.

Brian T.
Dec 06, 2012, 12:48 PM
Registered User
Thanks Brian, good to know I apparently did not overcharge mine.
Dec 06, 2012, 02:57 PM
Registered User
DamonH's Avatar
Does anyone know what would cause "Internal error----none" when I try to import a model into my DX8? I just completed the v2.06 update and was trying to transfer a Habu 32 file that I downloaded from the Spektrum website. Thanks.
Dec 06, 2012, 03:04 PM
AndyKunz's Avatar
Open the file with WordPad and make sure it's all readable.

Andy
Dec 06, 2012, 03:11 PM
Registered User
swashplates's Avatar
My cold weather problem part 2:
I did some investigation and it seem that every requiremet for a faultless operation is given.
But what i have found is, that my telemetry works even when the rx shows no reaction. On the telemetry screen for antenna fades, following is immediately displayed after powering on the heli.
Name: ImageUploadedByTapatalk HD1354828249.406817.jpg
Views: 54
Size: 30.6 KB
Description: (null)
Dec 06, 2012, 03:12 PM
Registered User
DamonH's Avatar
Quote:
Originally Posted by AndyKunz View Post
Open the file with WordPad and make sure it's all readable.

Andy


It is...all the way to the bottom where it says *EOF* which I assume means end of file?
Dec 07, 2012, 05:36 AM
AMA 84248 since 1964
itsme2,

You will need to really pay close attention to that battery. Just because the volts reading is nominal, it is possible that the battery capacity has been degraded. When I cooked mine I got the 5.5v reading off the charger, but flight time at the field was significantly less than what I got on the day I opened the box. Be very careful....

KKKKFL
Dec 07, 2012, 06:47 AM
Registered User
Quote:
Originally Posted by Franco2fly View Post
itsme2,

You will need to really pay close attention to that battery. Just because the volts reading is nominal, it is possible that the battery capacity has been degraded. When I cooked mine I got the 5.5v reading off the charger, but flight time at the field was significantly less than what I got on the day I opened the box. Be very careful....

KKKKFL
It's too bad that the charging circuit doesn't have an automatric cutoff for the nimh battery.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Receivers that work with Spektrum Radios that are not made by Spektrum BD Flyer Radios 29 Sep 26, 2010 04:09 AM
Discussion Spektrum AR6100E or Spektrum AR6100? LaurenceGough Off-road Cars 23 Aug 06, 2009 05:33 AM
For Sale Parkzone 5ch DX10 w/Receiver ch54 CarlHill Aircraft - General - Radio Equipment (FS/W) 7 Jul 10, 2009 12:07 PM
Discussion Can I use a Spektrum Air RX with a Spektrum Surface TX? Bigmaxy Radios 1 Jan 19, 2008 07:57 PM
Sold GeForce 8400Gs PCIx DX10 video card GFBurke Non R/C Items (FS/W) 6 Sep 05, 2007 10:43 PM