how can i set up delta/elevons in my flying wing type aircraft... from JR XF 622 - RC Groups
Thread Tools
Feb 04, 2010, 01:22 AM
Radio gives you wings ;)!!
mahmoodmusaddi's Avatar
Discussion

how can i set up delta/elevons in my flying wing type aircraft... from JR XF 622


heloo guys
brother is in desperate need of help here lol.
i just lost my radio for flying wing aircraft and very upset atm.
how ever i have a TX and RX set of radio 'JR XF 622' computer radio . i have used it in patternship and 3D 46 size nitro planes. not any electric how ever. i need to use it in my electric flying wing and set up its delta/elevons. so that same control surface works as ailerons aswell. hope u understand what i am looking for.
so plzzz can any 1 tel me how to change the setting of the radio to do this...??
Sign up now
to remove ads between posts
Feb 04, 2010, 04:23 AM
Quad Erat Demonstrandum
scousethief's Avatar
I cant really help but if mixing is not available on your radio just buy a V-Tail mixer , i use them on my wing and my stryker.

http://www.jrradios.com/ProdInfo/Fil...219-manual.pdf


page 20
Feb 06, 2010, 01:28 AM
Radio gives you wings ;)!!
mahmoodmusaddi's Avatar
Quote:
Originally Posted by scousethief
I cant really help but if mixing is not available on your radio just buy a V-Tail mixer , i use them on my wing and my stryker.

http://www.jrradios.com/ProdInfo/Fil...219-manual.pdf


page 20
hey thnx bro. i already came accross this manual link. how ever its for xf 631 , not for xf 622 but i tried it. it has done it but the only problem i am having is that since i use mode 2 in my JR radio. after doing this every thing is right except for the ailerons. when i move rudder stick ailerons move. when i move ailerons stick , ailerons dont work. rest throttle and elevator are fine.
hope u can help me or sum 1 can .
Feb 06, 2010, 07:04 AM
Quad Erat Demonstrandum
scousethief's Avatar
I dont have that radio but i will try and find an answer for you , can you not just swap the servo location at the receiver ? eg switch the leads around ?
Feb 07, 2010, 12:56 PM
Radio gives you wings ;)!!
mahmoodmusaddi's Avatar
Quote:
Originally Posted by scousethief
I dont have that radio but i will try and find an answer for you , can you not just swap the servo location at the receiver ? eg switch the leads around ?
yes i tried tht. reversing the lead of elevator and rudder. but it didnt work. hmm
Feb 07, 2010, 12:59 PM
Radio gives you wings ;)!!
mahmoodmusaddi's Avatar
hmm nice . yes i will get a v-tail mixer.. any idea about the cost tho?
Feb 07, 2010, 01:19 PM
Quad Erat Demonstrandum
scousethief's Avatar
V tail mixer are around 3 delivered from ebay

http://cgi.ebay.co.uk/Hobbywing-VTAI...item1c0c1d74ef

very cheap , the same one i use


when i move rudder stick ailerons move. when i move ailerons stick , ailerons dont work : plug the aileron servo into the rudder socket ?



http://www.horizonhobby.com/ProdInfo...622-manual.pdf
Last edited by scousethief; Feb 07, 2010 at 01:27 PM.
Feb 08, 2010, 12:18 AM
Radio gives you wings ;)!!
mahmoodmusaddi's Avatar
Quote:
Originally Posted by scousethief
V tail mixer are around 3 delivered from ebay

http://cgi.ebay.co.uk/Hobbywing-VTAI...item1c0c1d74ef

very cheap , the same one i use


when i move rudder stick ailerons move. when i move ailerons stick , ailerons dont work : plug the aileron servo into the rudder socket ?



http://www.horizonhobby.com/ProdInfo...622-manual.pdf
thnx for teh info scoutchief... so if i use v-tail mixer. i have to insert it in the aileron slot in teh reciever and it will work for both elevators and ailerons? is that it .. and then i put the throttle in teh third channel..
Feb 08, 2010, 07:25 AM
Quad Erat Demonstrandum
scousethief's Avatar
Throttle in throttle channel.

The mixer comes with 2 leads 1 for aileron and one for elevator .
The other end of the mixer has pins 1 set of 3 for each servo.

If movement is reversed just swap the servo pins. Really easy
Feb 09, 2010, 03:19 AM
Radio gives you wings ;)!!
mahmoodmusaddi's Avatar
Quote:
Originally Posted by scousethief
Throttle in throttle channel.

The mixer comes with 2 leads 1 for aileron and one for elevator .
The other end of the mixer has pins 1 set of 3 for each servo.

If movement is reversed just swap the servo pins. Really easy
thnx bro. i just ordered two of the mixers. and will use it.
btw my plane is a GOFLYKITE. u mite already have an idea. v cool and light kitle like thing . with carbon rods and carbon paper sheets.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion question on radio set up for delta wing elevons QinMD Electric Plane Talk 10 Jul 29, 2016 02:36 PM
Discussion how to set my shocks up in stampede xl5 kzpl14 Off-road Cars 3 Oct 27, 2009 06:55 PM
Discussion How can I embed the transmitter into my flying wing? tekrunner FPV Talk 2 Sep 03, 2009 06:00 PM
Discussion Can you help me set up my HL LYNX XF EDF? SwissBoy Foamy EDFs 14 Feb 19, 2008 06:03 PM
zagi set up with a JR 622 pval3 Flying Wings 7 Jun 20, 2005 12:20 AM