Shop our Airplanes Products Drone Products Sales
Thread Tools
May 17, 2003, 10:43 AM
Only nerd in the village

My new Jiglet


My old Jiglet (better known as Piglet) died in a crash. This is the replacement made from 2mm Selitac. AUW is 24 grams
Sign up now
to remove ads between posts
May 17, 2003, 10:45 AM
Only nerd in the village
Another shot
May 17, 2003, 10:50 AM
36 Russky jets
daisycutter's Avatar
Nice.... specs?
May 17, 2003, 10:55 AM
Sticky Shepherd
Graham Stabler's Avatar
I must get some selitac, it looks like handy stuff. Does it come in different colours?

G
May 17, 2003, 11:32 AM
Thats NOT indestructible
j8m8l's Avatar
OMG

That is just beautiful.
I have been Jiglet building too........getting a digicam this sumemr .
I would like to get some too, not quite as light as 2mm wallfoam, yet looks better, and probably stronger. Sounds good .

Josh
May 17, 2003, 12:14 PM
in persuit of low wing loading
Gordon Johnson's Avatar
Michael,
Very nice. The Selitac I have is sort of greenish. Were you able to get white Selitac. Also, I can't remember. Are you the original designer of the Jigglet? Or, do you just make more of them than anyone else?

Nice wheels.

Gordon
May 17, 2003, 12:17 PM
Sticky Shepherd
Graham Stabler's Avatar
Neither! I made about a million Jiglets before finding my problem was interference not the model. I had dead fusys stuck to my wall!!

It was designed by Simon from the Aeronutz.
May 17, 2003, 12:52 PM
Only nerd in the village
Gordon, the white Selitac was bought some years ago in Germany. Lately I have only seen the green stuff there. I have a roll of each. Should be enough for a couple of hundred Jiglets so I can beat Grahams record

I know I should try other models but since I have templates I can make one in a single evening while watching the telly.

Michael

PS: Notice the wheels - Oh, you did already
May 17, 2003, 12:57 PM
in persuit of low wing loading
Gordon Johnson's Avatar
Graham,
I thought it was designed by an Aeronutz, but for a while Michael's tag line was Overseas Aeronutz, or somthing like that. I just had to ask. So, we need all people who have built more than one Jigglet to post in this thread and we'll find out the true record holder.

Gordon
May 17, 2003, 03:04 PM
Thats NOT indestructible
j8m8l's Avatar
LOL

I have built about 15-20 of them from wallfoam.

Josh
May 17, 2003, 08:27 PM
Las Vegas Realtor
Inari's Avatar
Very nice!
May 18, 2003, 03:10 AM
Thats NOT indestructible
j8m8l's Avatar
Epilot.

Is that prop the molded CAM model?
What gearing do you use on the M20?

Thanks

Josh
May 18, 2003, 04:49 AM
Only nerd in the village
Yep, that's the prop molded on top of the little cam folder. IIRC the gearing is 6:1.

I have been using this same prop for almost 2 years know so it is certainly strong.
May 18, 2003, 09:24 AM
Foam Flyer
Depdog's Avatar
epilot, where I get the Jiglet plans at?

Thanks
Glenn
May 18, 2003, 09:29 AM
Thats NOT indestructible
j8m8l's Avatar
Hi Depdog.

The plans are sold by the Aeronutz (for a very small fee).
Unfortunatly they are not avaliably online for copy issuse (althought this may be explored again).

Please contact (the great) Mark at:
mark@aeronutz.flyer.co.uk

More information can be found on the 'nutz site:
http://www.aeronutz.flyer.co.uk/plans.htm

Hope this helps.

Josh


Thread Tools