Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by _Lunchbox_, who may elect to delete unwanted replies.
Feb 11, 2010, 07:16 PM
Hodgehound # 3
_Lunchbox_'s Avatar
Exactly
Sign up now
to remove ads between posts
Feb 11, 2010, 10:55 PM
OOPS
Manta1's Avatar
buwahahahaha mean ole daddy
Mar 09, 2010, 08:54 PM
Hodgehound # 3
_Lunchbox_'s Avatar
I picked up another kit at the Perry show from James....
Now I will build this one correctly.
I did see where I went wrong on the other one. I have gotten almost to the same point I was at with the other wing tonight, but I didn't take pictures since it would have been redundant. I will take pictures of what I did wrong and post them the next time I sit down to build.
Mar 09, 2010, 09:01 PM
YardGoat lives with mama
make sure you drink some Captain
Mar 09, 2010, 09:08 PM
Hodgehound # 3
_Lunchbox_'s Avatar
No captain... just Tea
Mar 11, 2010, 07:35 PM
OOPS
Manta1's Avatar
you using elmers glue with this one too?
Mar 11, 2010, 07:49 PM
Hodgehound # 3
_Lunchbox_'s Avatar
Ok, back to the grindstone since Bryan laid the law down and told me the plane has to be ready for SEFF

I finished the wing up to the sheeting the other night. That brings it back to the point where I was at before I had to punt.


I do have a question about step 14. It says to glue wing hinge sockets in place. Is the wing hinge socket part # TE-B? Or is it a part that glues to TE-B?
The picture in the instructions isn't clear. I also looked on the build thread, and can't really see any better.

In the meantime, I won't glue anything together.

I assembled the wingtip pieces and glued together in the next step...

More to follow..
Mar 11, 2010, 07:52 PM
Hodgehound # 3
_Lunchbox_'s Avatar
I just looked at the parts and found the wing hinge sockets.... Now I know how the TE of the wing goes together...
Mar 11, 2010, 08:20 PM
Hodgehound # 3
_Lunchbox_'s Avatar
I just finished the wing tip assembly.
I must say that I really like it. It is a fantastic way to put it together. Now I have to put in the braces and it will be done.
Mar 11, 2010, 08:28 PM
Hodgehound # 3
_Lunchbox_'s Avatar
I put the braces in, and now will need to do some sanding
Mar 11, 2010, 08:39 PM
YardGoat lives with mama
maybe you should have some captain in you
Mar 11, 2010, 08:40 PM
YardGoat lives with mama
Ohhhhh pretty
Mar 11, 2010, 08:43 PM
YardGoat lives with mama
This kit looks way more detailed than the first
Mar 11, 2010, 08:59 PM
Hodgehound # 3
_Lunchbox_'s Avatar
It is. I am almost done sanding. Pics to follow.
Mar 11, 2010, 09:08 PM
jkarpy's Avatar
Quote:
Originally Posted by rcproptester
Ok, back to the grindstone since Bryan laid the law down and told me the plane has to be ready for SEFF

I finished the wing up to the sheeting the other night. That brings it back to the point where I was at before I had to punt.


I do have a question about step 14. It says to glue wing hinge sockets in place. Is the wing hinge socket part # TE-B? Or is it a part that glues to TE-B?
The picture in the instructions isn't clear. I also looked on the build thread, and can't really see any better.

In the meantime, I won't glue anything together.

I assembled the wingtip pieces and glued together in the next step...

More to follow..
The hinge socket is shown in this picture:
https://www.rcgroups.com/forums/atta...mentid=3067933

There are 2 size hing sockets the six sockets that have markings are used on the wing. The markings are used to center the socket on the trailing edge. Use the smaller unmarked sockets for the tail control surfaces and the wing tip socket.

James

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Millenium X-gear Carbon Fiber Landing gear for Slow Stick Scirocco14 Aircraft - General - Miscellaneous (FS/W) 2 Jan 11, 2010 10:38 PM
For Sale Millennium RC Slow Stick outflying3d Aircraft - Electric - Airplanes (FS/W) 0 Jul 11, 2009 01:21 PM
Article Millennium RC Slow Stick X Kit Review Tram Parkflyers 81 May 23, 2009 09:23 AM
Discussion AP Slowstick - Millennium RC: Slow Stick X Hellsiege Aerial Photography 1 Aug 18, 2008 12:11 PM