Thanks Robert. I hope to maiden tomorrow.

Originally Posted by fearfactorfred

Thanks Robert. I hope to maiden tomorrow.

Dial your throws down this little plane can be snappy.

Hi tallflyer
Came across this bird of yours,and have to say well done.
Will definitely go onto my "to build list"

First of all, thanks for the drawing. I have builded the 26'' version. What about the CG and what AUW should I have ?

Norbert, Earlier in the thread Robert (tallflyer) says for the CG to Start at 3" from the leading edge of the wing. only i'm not sure if this is for the 22 or 26 version.

Measure the distance from the leading edge of the wing to the rear, then devide by 3, the first 3rd is a good place to start.

Example wing measures 9"
9 ÷3 " 3"
So 1/3 back =3"
That a good place to start.

Thanks !

Hey Robert do you have any idea why the SDPARKFLYERS forum has been marked inactive ? I thought it used to appear in the vendor forums but I don't see it there either. used to have it linked in my "MY Rcgroups" start page but since it's inactive it's harder to find now.

RCGROUPS gave me a free vendor link and then after years of posting told me if I wanted to keep my space i had to start paying money.

So the plus membership didn't cover that, huh... It was weird I had it on the screen hit refresh a poof no more SDPARKFLYERS, and then to try to find it wasn't straight forward either.

anyway to get back on track was the 22, 26, or 28 really all that much different in flying style, other than maybe a bit more twitchy the smaller you go?

The 22" is real snappy, i was flying them all on non computer radios at first so i used linkage to dial down but now you can mix out most issues.

Indoor flying season is upon us. The 26 is looking mighty interesting.

What thickness of EPP did you build it with?

Posted this great lil' flyer over here ..................….

https://www.rcgroups.com/forums/show...flying-machine