Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jan 25, 2010, 11:26 AM
robbstech is offline
Find More Posts by robbstech
Registered User
Discussion

Speed controller help


Sorry if this is in the wrong place to post this but I am new to this forum and I am seeking advice!

I am after a 24V 'brushed' speed controller but have only been able to find maximum 12V.

Is it possible to wire the inputs in parrallel so the input is only 12V and wire the outputs in series so the output will be 24V? Also I could wire the signal cables from both speed controllers in parrallel and plug them into the same channel so they both get the same signals!

Thanks and I look forward to hearing from other members in the future
Sign up now
to remove ads between posts
Old Jan 25, 2010, 11:41 AM
GmanBill is offline
Find More Posts by GmanBill
Registered User
GmanBill's Avatar
Check with Castle Creations (http://www.castlecreations.com/) Novak or Tekin. They should have something that would work or could point you in a direction that would have a solution.
Old Jan 25, 2010, 11:57 AM
robbstech is offline
Find More Posts by robbstech
Registered User
I should also mention it should be able to handle up to 80 Amps and it must be reversible! Meaning it must be able to run the motors in forward and reverse!

I can buy really really cheap 100 Amp controllers but can only handle 12volts so I want to be able to run 2 in series to get the 24V I require!

Thanx
Old Jan 25, 2010, 07:18 PM
scorpion1 is offline
Find More Posts by scorpion1
I feel the need for speed!
scorpion1's Avatar
Thought i had 'em for you.......i found a Novak 828HV and a Tekin 420F, 20 and 28 cell cpacity.....but NO reverse. I'll keep helpin' ya look.
Old Jan 26, 2010, 05:26 AM
robbstech is offline
Find More Posts by robbstech
Registered User
Quote:
Originally Posted by scorpion1 View Post
Thought i had 'em for you.......i found a Novak 828HV and a Tekin 420F, 20 and 28 cell cpacity.....but NO reverse. I'll keep helpin' ya look.
Thank you so much
Old Jan 26, 2010, 08:46 PM
jettrooper02 is offline
Find More Posts by jettrooper02
jettrooper02's Avatar
check out www.robotmarketplace.com they'll probably have exactly what your looking for.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Plantraco 4ch receiver + HobbyKing XP 3A Brushless Speed Controller AleG Scratchbuilt Indoor and Micro Models 40 Jul 07, 2010 02:43 PM
Sold Speed controller for sale leybold12 Aircraft - Electric - Power Systems (FS/W) 8 Jan 16, 2010 03:50 PM
Discussion New tail fan/yaw control speed controller Majortomski Blimps 1 Jan 15, 2010 04:20 AM
Help! Speed Controller / Motor timing? streborz Power Systems 4 Jan 06, 2010 11:21 PM