help: first viper 500 - Page 3 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jul 27, 2010, 10:16 PM
Angry Flyer!
jriley1974's Avatar
Someone was telling me about a fix for the TT40 pro regarding an unreliable spring in the carb...

Can somebody tell me more about this?
Sign up now
to remove ads between posts
Jul 27, 2010, 11:29 PM
Registered User
yeah, take the carb off, theres a smaller screw on the throttle arm sidetake that screw out it will allow you to remove the throttle barrel, the spring should come right out, then put the barrel back in, and put the screw back in, with a dab of locktite,

also pick up a throttle cable kit and a ball link kit, it will help out with your throttle linkage binding, feel free to call me John, or if you want me to help ya get that one dialed in.

hope you had fun this weekend!!
Jul 27, 2010, 11:38 PM
hot air rises...
jfinch's Avatar
Ditto what Stevem9 said, but I slipped a small (~3/32" - 1/8" long) piece of fuel line over the nipple in the throttle (where the spring is normally located) before putting it all back together. This keeps the throttle barrel from rattling and helps to push it open.
Jul 28, 2010, 09:23 AM
Registered User
im going to try that jfinch good idea!
Dec 07, 2011, 02:56 AM
Registered User
Hi there. I am to stick a Nelson engine to my Viper 500. The problem is that the tank will not fit, I will like to put the bubble Jet or one of Shadells 6 oz tank. Any suggestions, I dont want to cut threw the fuselage area, another option will be to place the tamk inside the fuselage, not on the tank area. Any suggestions for solving this issue?
Dec 07, 2011, 01:16 PM
Registered User
Some of the more narrow Jett tanks will slide forward inside the Viper tank compartment. In most cases I have dremel'd the former until the tank fits. If you can't slide the tank that far forward, simply put it under the wing as far forward as possible (which will better align it with the cg). Directly over the landing gear plate is perfect, but just make sure the landing gear bolts don't rub on the tank. If they do, shorten the bolts

Kurt
May 09, 2014, 02:57 AM
Angry Flyer!
jriley1974's Avatar
Years later, still flying these Vipers. Racing is fun, but I also just sport fly it at my local field.

Viper 500 @ Flaming Geyser State Park (4 min 0 sec)


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale viper 500 REDUCED BR2200 Aircraft - Fuel - Airplanes (FS/W) 3 Oct 12, 2009 05:57 PM
Sold Viper 500 Nib (red)---$85 RC4RS Aircraft - Electric - Airplanes (FS/W) 2 Sep 20, 2009 12:09 AM
For Sale Viper 500, CF reinforced fuse, Mega 22/30/2, 100amp ESC, CCBEC, Servos, Tail Steering Z06kal Aircraft - Electric - Airplanes (FS/W) 5 Sep 16, 2009 01:41 PM
Discussion Viper 500 E-Quickee 500 BulletMaster Australia 3 Nov 24, 2008 01:14 AM
Sold VIPER 500: quickie 500 pylon racing plane with servos, batt, and switch. simo10 Aircraft - Fuel - Airplanes (FS/W) 0 Jun 05, 2007 11:09 AM