Thread Tools
Mar 28, 2011, 10:29 AM
Registered User
SnowDog1974's Avatar

throws


Quote:
Originally Posted by brathanke
mschulz I need the 47" edge. I was able to just download the 41" from the link you posted in EXACTLY the same way I was trying to get the manual I need. I think the file has been moved so you still get a pdf but it is 0 bytes and won't open... which as Plow noted really "bytes"
Check my previous post - I updated it with some info from other manuals on the 3DHS web site - I think you will have the info you need from these.
-Mike
Sign up now
to remove ads between posts
Mar 28, 2011, 11:35 AM
A trail of smoke is GOOD!
waynemia's Avatar
Quote:
Originally Posted by brathanke
mschulz I need the 47" edge. I was able to just download the 41" from the link you posted in EXACTLY the same way I was trying to get the manual I need. I think the file has been moved so you still get a pdf but it is 0 bytes and won't open... which as Plow noted really "bytes"
If you use the degress of deflection, you should be fine.

Aileron 15 degrees .75 30% Expo
Elevator 13 degrees 1.25 30% Expo
Rudder 45 degrees 4.0 75% Expo
High/3D Rates (in degrees and inches) and Corresponding Exponential
Aileron 28 degrees 1.25 75% Expo
Elevator 45 degrees 3 70% Expo
Rudder 45 degrees 4.0 75% Expo
Mar 28, 2011, 11:43 AM
Do Da Dippidy
plowboy1966's Avatar
I like triple rates myself, high, higher and WTH?!!

Mar 28, 2011, 12:10 PM
Registered User
balsabuster2004's Avatar
You apparently weren't listening during ground school.
Mar 28, 2011, 12:24 PM
Do Da Dippidy
plowboy1966's Avatar
Quote:
Originally Posted by balsabuster2004
You apparently weren't listening during ground school.

Your fault!
Mar 28, 2011, 12:27 PM
A trail of smoke is GOOD!
waynemia's Avatar
Quote:
Originally Posted by plowboy1966
I like triple rates myself, high, higher and WTH?!!

me 2

one of our guys calls the third rate, "Stupid Rate".
Mar 28, 2011, 12:33 PM
Flying Half Pound and Down
DaOldGuy's Avatar
Quote:
Originally Posted by balsabuster2004
You apparently weren't listening during ground school.
You have to listen?
Mar 28, 2011, 01:05 PM
Registered User
balsabuster2004's Avatar
Quote:
Originally Posted by plowboy1966
Your fault!
If I remember right, the experience was kind of like trying to pound a nail into a rock!
Mar 28, 2011, 01:10 PM
Do Da Dippidy
plowboy1966's Avatar
Quote:
Originally Posted by balsabuster2004
If I remember right, the experience was kind of like trying to pound a nail into a rock!

Some of best weeks of your life!!
Mar 28, 2011, 02:01 PM
3d NOOBular
3DNater's Avatar
Balsa is that a little nitroplanes dragonfly in your avatar?
Mar 28, 2011, 02:03 PM
3d NOOBular
3DNater's Avatar
Hey guys... my persistence has finally paid off... Of course it pretty much says what you guys said so consider your ego stroked

http://www.3dhobbyshop.com/assets/im...VR1-Manual.pdf

The instructions in this manual include the 47" Edge.
Mar 28, 2011, 02:06 PM
Registered User
SnowDog1974's Avatar
Quote:
Originally Posted by brathanke
Hey guys... my persistence has finally paid off... Of course it pretty much says what you guys said so consider your ego stroked

http://www.3dhobbyshop.com/assets/im...VR1-Manual.pdf

The instructions in this manual include the 47" Edge.
brathanke,
Glad you finally found the info you were looking for.
We expect maiden flight videos!!!
Mar 28, 2011, 02:20 PM
Do Da Dippidy
plowboy1966's Avatar
Quote:
Originally Posted by mschulz
brathanke,
glad you finally found the info you were looking for.
We expect maiden flight videos!!!

+1 !!! :d
Mar 28, 2011, 02:25 PM
Registered User
SnowDog1974's Avatar
Quote:
Originally Posted by brathanke
Hey guys... my persistence has finally paid off... Of course it pretty much says what you guys said so consider your ego stroked

http://www.3dhobbyshop.com/assets/im...VR1-Manual.pdf

The instructions in this manual include the 47" Edge.
Ok, I have to ask...how in the world did you figure out that the manual that covers the Velox also covers the Edge?
Mar 28, 2011, 02:43 PM
Do Da Dippidy
plowboy1966's Avatar
Quote:
Originally Posted by mschulz
Ok, I have to ask...how in the world did you figure out that the manual that covers the Velox also covers the Edge?

I'm betting he read them all!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Tower SUper Saver Club la528it Hot Online Deals 55 Sep 16, 2016 04:53 PM
Discussion New Club Thread - Northern Beaches Soaring Club Psionic001 Australia 13 Sep 11, 2014 07:45 AM
Discussion San Francisco Model Yacht Club's multi-club Swap Meet craig_c Dock Talk 17 Oct 13, 2009 02:28 AM