New Products Flash Sale
Thread Tools
Old Mar 08, 2013, 10:22 PM
waynemia is online now
Find More Posts by waynemia
A trail of smoke is GOOD!
waynemia's Avatar
Quote:
Originally Posted by kerwin50 View Post
With the chinese ring it could take up to 5 gallons for break in
I think that is a little much Kerwin. My experience is about 2 gallons and it will be up and mellow.
Sign up now
to remove ads between posts
Old Mar 08, 2013, 10:35 PM
DaOldGuy is offline
Find More Posts by DaOldGuy
Flying Half Pound and Down
DaOldGuy's Avatar
my 55 has little less then a gallon through it and it is very strong, and I am using Synthetic. If this thing continues to break in like this it is going to be giggles of fun.
Old Mar 08, 2013, 11:39 PM
abaser is offline
Find More Posts by abaser
Lawn Dart Professional
abaser's Avatar
Finally finished the assembly of both models tonight. Got 'em balanced, throws set, and everything else as far as I know. They are ready for fuel and flight......I hope.

Quick question though. In balancing the Tribute, even with the oversized motor, it was taking 1.5 oz. to balance on the recommended CG. I got to thinking about a set of rubber tires I had in the box, so I put them on in place of the foamies, and rebalanced. Now, she balances perfectly on the CG point with absolutely no added lead. Is this a good decision? Or should I go back to the foamies and add the lead?

Now, Ive got three birds calling my name for tomorrow. Just hope the wind is down. Oh yeah, CROSS YOUR FINGERS FOR ME!!!
Old Mar 08, 2013, 11:53 PM
David22 is offline
Find More Posts by David22
Suspended Account
Quote:
Originally Posted by abaser View Post
Finally finished the assembly of both models tonight. Got 'em balanced, throws set, and everything else as far as I know. They are ready for fuel and flight......I hope.

Quick question though. In balancing the Tribute, even with the oversized motor, it was taking 1.5 oz. to balance on the recommended CG. I got to thinking about a set of rubber tires I had in the box, so I put them on in place of the foamies, and rebalanced. Now, she balances perfectly on the CG point with absolutely no added lead. Is this a good decision? Or should I go back to the foamies and add the lead?

Now, Ive got three birds calling my name for tomorrow. Just hope the wind is down. Oh yeah, CROSS YOUR FINGERS FOR ME!!!
I would consider adding spars or reinforcing areas that are known to be weak in tail end

I used really not good wheels once on my cub 60 with 46 ax os motor
It was sloppy in take off
Nice wheels most likely to be important as the landing gear

Twist v2 are disaster
V1 very good

Twist 150 gear heavy but very strong and bend not ever

Beef up the tail I say and make light wheels that are installed well with no slop

One day soon I want to fuel up all planes ,turn them over let them sit over night , then do a twisted party and start them all up , and let them run in harmony
I'll bind and set fail safes to same RC transmitter

It will be david22s orcastra
Old Mar 09, 2013, 12:44 AM
3DNater is offline
Find More Posts by 3DNater
3d NOOBular
3DNater's Avatar
Good luck abaser
Old Mar 09, 2013, 01:43 AM
waynemia is online now
Find More Posts by waynemia
A trail of smoke is GOOD!
waynemia's Avatar
Quote:
Originally Posted by abaser View Post
Finally finished the assembly of both models tonight. Got 'em balanced, throws set, and everything else as far as I know. They are ready for fuel and flight......I hope.

Quick question though. In balancing the Tribute, even with the oversized motor, it was taking 1.5 oz. to balance on the recommended CG. I got to thinking about a set of rubber tires I had in the box, so I put them on in place of the foamies, and rebalanced. Now, she balances perfectly on the CG point with absolutely no added lead. Is this a good decision? Or should I go back to the foamies and add the lead?

Now, Ive got three birds calling my name for tomorrow. Just hope the wind is down. Oh yeah, CROSS YOUR FINGERS FOR ME!!!
Changing the wheels is fine. Good luck.
Old Mar 09, 2013, 02:11 AM
waynemia is online now
Find More Posts by waynemia
A trail of smoke is GOOD!
waynemia's Avatar
Tell me about flat-spinning your 300 Ron.
Old Mar 09, 2013, 06:20 AM
DaOldGuy is offline
Find More Posts by DaOldGuy
Flying Half Pound and Down
DaOldGuy's Avatar
Quote:
Originally Posted by waynemia View Post
Tell me about flat-spinning your 300 Ron.
I flat spin my plank.... 300SHP.... They do a mean knife edge spin, they do a killer blender, which ends in a flat spin, I dont know that I have seen anyone do just a flat spin.
Old Mar 09, 2013, 07:46 AM
joshgluck is offline
Find More Posts by joshgluck
Registered User
joshgluck's Avatar
Quote:
Originally Posted by brathanke View Post
Good luck abaser
Werd!

Thx to all for the help w xoar
Snowdog as usual great link ;-)
RCG Plus Member
Old Mar 09, 2013, 10:26 AM
kerwin50 is offline
Find More Posts by kerwin50
Registered User
kerwin50's Avatar
David you'll have to video that glow opera.
Abaser I've got my fingers crossed. Yes the winds are hitting me as well.
Wayne I don't have any experience on the break in time. I was just going by what I heard over at FG and RCU. That was the main reason I put a Frank Bowman ring in my DLE 30.
BTW I've heard that Frank Bowman is getting stressed out from all the orders he's been getting lately and told another guy he thought about getting out.
Now that would be a shame indeed.
Old Mar 09, 2013, 10:42 AM
abaser is offline
Find More Posts by abaser
Lawn Dart Professional
abaser's Avatar
Wouldn't you know it. After 2 days of near calm winds, this morning the wind gods are not on my side. It's at about 12 mph, a little high for my comfort, but I'm trying to find someone to buddy box me. If I do, I'll have to change my RXs out because the trainer switch on my TX is broke. May just take the day to break in my 46 on the trainer.
Old Mar 09, 2013, 10:47 AM
snowman is offline
Find More Posts by snowman
Registered User
12mph too high? Wind is your friend, unless your engine dies......and even then the wind can get you home if you're upwind! Go fly my friend........screw the 12mph breeze!
Old Mar 09, 2013, 10:50 AM
abaser is offline
Find More Posts by abaser
Lawn Dart Professional
abaser's Avatar
Quote:
Originally Posted by snowman View Post
12mph too high? Wind is your friend, unless your engine dies......and even then the wind can get you home if you're upwind! Go fly my friend........screw the 12mph breeze!
Shows what I know. I was always told that anything over 10 was a battle. That's one reason my past experience is so limited. Around here, 10-15 is average.
Old Mar 09, 2013, 11:11 AM
SnowDog1974 is offline
Find More Posts by SnowDog1974
Registered User
SnowDog1974's Avatar
Quote:
Originally Posted by abaser View Post
Shows what I know. I was always told that anything over 10 was a battle. That's one reason my past experience is so limited. Around here, 10-15 is average.
Same here...if I didn't fly in 10-15 mph winds, I would never fly.
You just have to take some care when taxiing in/out.
Old Mar 09, 2013, 01:17 PM
tower flyer is offline
Find More Posts by tower flyer
Registered User
abaser Good luck with maiden.

\It was a good at El Paos . Went to the field about 7:45 this morning because it was forecast to be windy, so it was clam this morning. By the time I got to the field the wind had begin to pick up and sky was partly cloudy. I put my Something Extra together, Then the Big Stik, I guess you can call it a remaiden on the something Extra after the rebuild and the maiden on the stik. Any way I fuel both up and start the Extra ,checked the controls and rolled out for takeoff. Lined up and opened the throttle , take off turn left on clime out add click of right aileron, level out flies straight and level hands off. Flew around pattern and checked out, flies good so I land and get ready for the stik.

I did range check and it worked fine. Primed the engine and turned on ignition, Flipped the prop engine fired and died, pushed in choke and flipped again, fired on first flip. I did a range check again ,every thing worked. I let go of the hold down and taxied out and checked ground handling OK, now takeoff , left the ground in 2'and was climbing straight up gave it a little down,then gave about 4or 5 clicks of down trim. Now flying straight and level. All I can say about it , it flies like a Stik. Flies fast ,slow and rock solid. Landing are like it is on rails, I think it could land hands off. On second flight I turned in for approche and hit the kill switch, dead-stick was a nonevent landed was if on rails. On third flight it was going real good , wind was blowing strong and was turning for approach went engine died , turned into wind, low over pond and down for landing in between the pond and barbed wire fence. I went and got though the fence picked up the plane , Perfect, then i called it a day. Come to find out when I defueled I found I was out of gas, did NOT fuel up after other flight. But it was a good day.
Last edited by tower flyer; Mar 09, 2013 at 04:02 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Tower SUper Saver Club la528it Hot Online Deals 55 Sep 16, 2016 05:53 PM
Discussion New Club Thread - Northern Beaches Soaring Club Psionic001 Australia 13 Sep 11, 2014 08:45 AM
Discussion San Francisco Model Yacht Club's multi-club Swap Meet craig_c Dock Talk 17 Oct 13, 2009 03:28 AM