Shop our Airplanes Products Drone Products Sales
Thread Tools
Jun 09, 2012, 06:15 PM
Twistaholic AMA 134406
Dad_Roman's Avatar
Quote:
Originally Posted by mt_flyer
What I am thinking, I had never seen one before and didnt see it in any parts breakdown for Saito
I dunno my brotha!




Quote:
Originally Posted by jacklegchris
I don't remember a bushing. Unless it was from the spinner backplate that I had on it.
OOooooo....now Ive been known to put a bushing on a spinner thats been overbored
Sign up now
to remove ads between posts
Jun 09, 2012, 06:21 PM
Montana Transplant
mt_flyer's Avatar
Quote:
Originally Posted by jacklegchris
I don't remember a bushing. Unless it was from the spinner backplate that I had on it.
a bushing for a spinner would make sense.... you need it back now, or when I see you next month
Jun 09, 2012, 06:46 PM
Hardrock Miner
jacklegchris's Avatar
Next month is fine. You run the Saito yet? I had been using Powermaster YS/Saito 20/20 in it.
Jun 09, 2012, 06:56 PM
A trail of smoke is GOOD!
waynemia's Avatar
Quote:
Originally Posted by plowboy1966
That's sous chef! Lol
BASIC RECIPE
Roux
Chicken thigh meat
Smoked sausage (andouille if you got it)
Tasso if you can get it
Black pepper
Red pepper
Salt
Garlic
Onions
Bell pepper
Green onions
Bay leaf
Water

Serve over white rice.
It's that simple.
Now what is the Roux and I HATE dark meat.

Quote:
Originally Posted by Dad_Roman
I can make Sushi....
You don't MAKE sushi, you CUT it, like bait.

Quote:
Originally Posted by mt_flyer
Saito question... I got a Saito 125 from Chris... it has a removable brass bushing on the shaft against the prop back plate... do I ream the prop to fit the bushing or can I remove the bushing an install the prop normally
It is a spinner backplate spacer more than likely. I had them for TruTurn spinners.
Jun 09, 2012, 07:08 PM
Montana Transplant
mt_flyer's Avatar
Quote:
Originally Posted by jacklegchris
Next month is fine. You run the Saito yet? I had been using Powermaster YS/Saito 20/20 in it.
installing today, will run tomorrow... I have Magnum ys/saito20/20
Jun 09, 2012, 07:19 PM
Twistaholic AMA 134406
Dad_Roman's Avatar
Quote:
Originally Posted by waynemia
Now what is the Roux .............

You don't MAKE sushi, you CUT it, like bait.
.
LOL....no appreciation

....and if thats what ya think of sushi then you'll never understand Roux
Jun 09, 2012, 07:30 PM
Montana Transplant
mt_flyer's Avatar
Quote:
Originally Posted by dad_roman
lol....no appreciation:d

....and if thats what ya think of sushi then you'll never understand roux
++1
Jun 09, 2012, 07:35 PM
Twistaholic AMA 134406
Dad_Roman's Avatar
Damn....that kinda looks like a poke in the eye when its in red

Sorry there Wayne...didnt mean it to come across like that.

Just good ole ribbin
Jun 09, 2012, 08:06 PM
Hardrock Miner
jacklegchris's Avatar
Daniel,You said Moose Park July 11th? I'm off 11th-14th, 19th-22nd, and 27th-30th in July.
Jun 09, 2012, 10:25 PM
Do Da Dippidy
plowboy1966's Avatar
Well the executive chef is very cool and very appreciative, not an egotistical prima Donna like some of them. He liked the gumbo and wants me to teach him how to make it.

I'm tired! Just gonna work lunch tomorrow. I need to go flying!!

Snowman!! That's some funny stuff right there!! Well, it does take low heat and constant stirring to make a good roux!!

I hope everybody is getting stick time, bring on the reports, pics, vids and tall tales!! Lol
Jun 09, 2012, 10:28 PM
Flying Half Pound and Down
DaOldGuy's Avatar
Quote:
Originally Posted by plowboy1966
I hope everybody is getting stick time, bring on the reports, pics, vids and tall tales!! Lol
Winds are 3 gusting to 4 tomorrow last I looked
Jun 09, 2012, 10:29 PM
A trail of smoke is GOOD!
waynemia's Avatar
Quote:
Originally Posted by Dad_Roman
Damn....that kinda looks like a poke in the eye when its in red

Sorry there Wayne...didnt mean it to come across like that.

Just good ole ribbin
You are probably right.
Jun 09, 2012, 10:36 PM
Montana Transplant
mt_flyer's Avatar
Quote:
Originally Posted by jacklegchris
Daniel,You said Moose Park July 11th? I'm off 11th-14th, 19th-22nd, and 27th-30th in July.
We are planning to be up there from the 11th on.... I will double check with the "powers that be". She wants to go to Glacier sometime during our stay, I need to find out when that is....

Saito mounted 15x8 wood prop and on board glow...Changed over to 2.4.
I will run it tomorrow. I will add telementry later as this is my cross country plane.
Jun 10, 2012, 08:47 AM
Registered User
Supposed to be in the upper 90's today! My lone air-conditioner is plum tuckered out and is about to give up the ghost! (I think manufacturers send us their barely-working rejects anyway.....thinking that we don't know what real heat is up here!) Even the mosquitoes are no where to be seen/heard.....now that's hot...those little bastards know they'd have to fight all that sweat......which would slow their blood-laden take-off enough to eliminate their element of surprise...increasing their chances greatly of being splatterized! (Local variant of the word splatter.)
I'll being spending the day facilitating the phase change of H2O....changing ice to liquid water....that's blasphemy to a snowman.
Jun 10, 2012, 09:29 AM
Registered User
kerwin50's Avatar
Snowy thats amazing your going to be hotter than us. our high should just barley hit 90 and they say a cool front is coming through.
That it self has it's pros and cons with the main con is wind. it's allready 18 mph wind and it's just going to get stronger.
Thanks to my lil flat foamie I was able to get 2 flights in last night right before dark at 9 o clock.
Yeah I did crash it twice due to the low light but she came out unscathed.
One of the things I found out is I had some up thrust on her so I had to cut the motor mount tube out and reglue it. Inverted flight should be much nicer now.
I can't make my mind up. Shold I deck this flat foamie out with lights or just scratch build one out of some foam and light it up.
O well I'll spend some time with momma today and maybe play like david did with his wife on her birthday. O the joy of no kids


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Tower SUper Saver Club la528it Hot Online Deals 55 Sep 16, 2016 04:53 PM
Discussion New Club Thread - Northern Beaches Soaring Club Psionic001 Australia 13 Sep 11, 2014 07:45 AM
Discussion San Francisco Model Yacht Club's multi-club Swap Meet craig_c Dock Talk 17 Oct 13, 2009 02:28 AM