Shop our Airplanes Products Drone Products Sales
Thread Tools
Jan 17, 2010, 04:21 PM
Registered User
Discussion

Donuts Models Nano Elite Pro


I'm looking into getting a Nano Elite Pro from Donuts but I'm not quite sure what electronics to put in it. Any suggestions on motor, esc, reciever, battery, servos, etc.?
Thanks in advance
Sign up now
to remove ads between posts
Jan 18, 2010, 07:29 AM
Beware the Axis of Weasel.
thewildweasel's Avatar
AR6400 and suitable geared motor should see you right. You'll need the extra, separate servo as well, and I like the e-flite 150mAh lipo.

Not got one of these myself, but that's what the guy at a model shop I go to has in his.

Good luck and post your progress.
Jan 18, 2010, 08:03 AM
Registered User
JPHen's Avatar
I ordered one of the Nano planes from Robotbirds (330L). Going to try the AR6400L for the rudder and elevator and a 2.5gr servo for the ailerons. Got an AP05 and 3a Turnigy ESC and Hyperion G3 1s 120. Does anyone know if the kit comes with the pushrods? Thanks.

Joe
Jan 18, 2010, 09:24 AM
Beware the Axis of Weasel.
thewildweasel's Avatar
It's just the foam, nothing else, so you'll need to provide cf for stiffening, pushrods and everything else.

Having seen one of these I can tell you that they are tiny...
Jan 18, 2010, 09:51 AM
Registered User
What's the wing span on this thing?
I can't seem to find it...
Thanks for the help.
Jan 18, 2010, 02:00 PM
Registered User
JPHen's Avatar
Makes me wonder if I should go with the micro yak or Aito...
Jan 18, 2010, 04:59 PM
Electronics and RC
MegaTesla's Avatar
Quote:
Originally Posted by FoamyFlyer09
What's the wing span on this thing?
I can't seem to find it...
Thanks for the help.
32cm
Jan 18, 2010, 05:34 PM
Registered User
JPHen's Avatar
I'll post pics when I get mine. It's actually the 330sc.
Jan 25, 2010, 07:15 PM
Registered User
JPHen's Avatar
Here's the SU-31 plans from Kyosho. http://www.kyosho.com/jpn/support/in...HOI_Su31_m.pdf

Gives me some insight on how to set it up. I just got the plane and will post pics shortly. I also bought the pushrod set from Amainhobbies. I have the 6400L, so all I'll need is the 2.5 g servo, motor and esc from Hobbyking and I'll be set...
Jan 26, 2010, 12:39 PM
Once crash at a time
Bowerz's Avatar
Why not use the 4-site motor, an AR6400L and for a bipe i would suggest 2 servo's and do dual ailerons.
Jan 26, 2010, 02:14 PM
Registered User
JPHen's Avatar
I guess that's an option, but I was looking for more power to have on tap.
Feb 15, 2011, 08:17 AM
From The Lab
Does anyone know if Donuts models are distributed in the USA?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Donuts Models Deluxe Andrew Jesky Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 0 Nov 23, 2009 10:47 AM
Discussion AITO from Donuts models, Video by Dontas Pauzuolis 3Don 3D Flying 12 Nov 13, 2009 11:59 AM
Cool Donuts-Models.com "ELITE PRO" F3P/3D kit for sale on rcgroups aero104 Indoor Pattern/F3P 1 Jun 07, 2009 10:50 AM
For Sale Donuts Models "ELITE PRO" F3P/3D indoor foamy aero104 Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 4 Jun 07, 2009 10:49 AM
For Sale Donuts Models Elite PRO wingster Aircraft - Electric - Airplanes (FS/W) 1 Feb 03, 2008 09:23 AM