Thread Tools
Jan 17, 2010, 01:41 PM
Registered User
Discussion

Walkera CB180D FP


Hi all,

I wonder if someone could help with a question I have about the Walkere CB180?.

I notice there are some threads about this heli, and I wondered how difficult it was to replace the tail rotor blade??.

Many thanks..

Martin.
Sign up now
to remove ads between posts
Jan 17, 2010, 04:19 PM
Crash Addict
gabber865's Avatar
I've done two already. It's easier to break off the rest of the blades and grab what's left with needle nose pliers and pull off. It's pressed on so you'll have to tug and twist back and forth, but it'll come off. Good luck!
Jan 17, 2010, 04:44 PM
Registered User
Many thanks indeed, I take it the new blades just press on then??..

I live in the UK and still have a bit of trouble finding replacement parts..

Best wishes,

Martin.
Jan 19, 2010, 10:23 AM
Crash Addict
gabber865's Avatar
I use wowhobbies.com. Their based out of California USA. Not sure how quick they can get parts too you, but i get them very fast. They only deal with Walkera. Yes they just press on. Do yourself a favor and buy at least 4 you'll need them

Good Luck
Mark
Jan 19, 2010, 06:43 PM
Registered User

replacing tail


Quote:
Originally Posted by Martyble View Post
Hi all,

I wonder if someone could help with a question I have about the Walkere CB180?.

I notice there are some threads about this heli, and I wondered how difficult it was to replace the tail rotor blade??.

Many thanks..

Martin.
i just replaced my tail with a new one just two screws to take off heat shield small philipps screw driver flip upside down to remove unfortunately motor still not working properly can anybody give me help with this issue
thanks matt
Jan 21, 2010, 02:17 PM
Registered User
Can some one explain how to take the tail props off? on walkera cb180D . Do i just pull it right off with my hands or needle nose pliers ? or do i have to screw off something? please and tahnk u , dont want to mess it up more
Jan 22, 2010, 11:17 AM
Registered User
Quote:
Originally Posted by seks718 View Post
Can some one explain how to take the tail props off? on walkera cb180D . Do i just pull it right off with my hands or needle nose pliers ? or do i have to screw off something? please and tahnk u , dont want to mess it up more
Take an old knife and heat up the tip with a propane torch. Slice down through the old blade to the shaft. The rotor will fall off.

Press the new on on with a small c clamp.
Jan 22, 2010, 10:43 PM
Registered User

im a noob please answer me lol


ok
on the walkera cb180d is it normal if it does not have a rudder on or a broken rudder on would it cuse it to spin out about 2 ft off the ground ? and once i replace it with a new one would this problem be fixed?
Jan 23, 2010, 04:04 PM
Registered User
I got the rudder off , i had to cut it of ,I put a new one on and it hovers the best i love it , lot of fun ! so far so good thank u everybody


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product RCHobbyHelicopter Walkera CB180D&Q Mod Thread johnIn2SonAZ Micro Helis 1676 Feb 26, 2012 02:49 PM
Discussion Walkera HM CB100 or Walkera HM CB180D? alnaabi Beginner Training Area (Heli-Electric) 10 Apr 10, 2010 03:41 PM
Discussion Walkera 2801 and CB180D rrumsey Electric Heli Talk 2 Feb 01, 2010 12:59 PM
Discussion Walkera 2801 and CB180d rrumsey Mini Helis 0 Jan 08, 2010 09:25 AM
Discussion wALKERA CB180D FIXING fonz316 Micro Helis 1 Oct 29, 2009 05:05 PM