RCM Eagle V jet mostly built, made for MW-54 turbine
More garage cleaning....Here is another lost project of mine. I started this about 5 years ago and got this far on it and was told by my flying clubs that turbines are outlawed. That really slowed down the building. So It's been sitting since. I have sold the turbine I made for it, as well as the landing gear I made. There is a little sheeting left to do on the underside, and some work to do for the canopy, not to mention a ton of sanding. It has the servo cutouts in where they need to be, with some dental floss in there so you can run the servo wires to the center section without too much trouble. Could be a project for someone. If you do a check on youtube for the Eagle V there are some videos of a guy flying his and it hauls a$$ with a MW-54 turbine. Please know, this will need quite a bit of finishing work to get it going, but it may give someone a good start. The plans will be included as well.
This is for pickup only in Columbus, Indiana. If you are serious I can get some better pictures of it so you can see what needs done.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||90mm EDF Scout (v.fast turbine model)||devmonkey||Electric Ducted Fan Jet Talk||6||Feb 09, 2010 07:03 AM|
|Discussion||Jet for MW 44 Gold ?||SMR850||Jet Turbines||2||Sep 25, 2009 10:59 AM|
|For Sale||Jet Central Super Eagle turbine||Hammbone||Aircraft - Fuel - Engines and Accessories (FS/W)||0||Jun 10, 2009 03:14 PM|
|Discussion||jetcat p70 vs wren MW 54||bandits||Jet Turbines||10||Sep 19, 2007 03:56 AM|
|hi where can buy MW-54 plan??||Sirio||Fuel Jet Talk||14||May 10, 2005 07:29 PM|