How has your MSR 5in1 held up - RC Groups
Shop our Airplanes Products Drone Products Sales
View Poll Results: How has your MSR 5in1 held up
Received a bad 5in1 1 2.44%
I physically broke my 5in1 in a crash 4 9.76%
5in1 burned up or just (stopped working) 4 9.76%
Over 30 flights and no problems at all" with my 5IN1 32 78.05%
Bought a new board just in case (for a back up) 0 0%
Voters: 41. You may not vote on this poll

Thread Tools
Jan 15, 2010, 05:46 AM
What package dear?
Hellysmack's Avatar
Poll

How has your MSR 5in1 held up


I closed the other threat and believe this poll would give clear results. I realized it would be better to start fresh because I could not fix other.
Sign up now
to remove ads between posts
Jan 15, 2010, 04:11 PM
2 Turbos...Nope 1 Big one
skeppley's Avatar
voted and bumped
Jan 15, 2010, 04:21 PM
Registered User
Flown the hell out of it.. probably at the very least 100+ flights and no issues really. Replaced one servo collar that's it.
Jan 15, 2010, 06:15 PM
Registered User
Mine has even taken a trip into the kitchen sink! While my wife was doing dishes! pulled it out of the water, unplugged the battery and let it all dry out overnight. put battery back in and it has anouther 50 plus flights on it! I thought it was a gonner.
Jan 15, 2010, 09:25 PM
Registered User
I have no idea how many flights I've done on my MSR but heres how many parts I've simply worn out(not broken):
3x Flybars (ovaled out --now I just fill/drill them out with epoxy)
2x Blade Grips (Eventually horizontal slop develops between the spindle and grips)
1x Servo (motor simply spazzed)
The axle probably needs to be replaced some time soon as well.

No problems with the 5 in 1 whatsoever.
I'd guess that I'm around 175-200 flights.

Edit:
I averaged it out and I think I'm somewhere between 168-180 flights
Last edited by Matt.R; Jan 15, 2010 at 09:57 PM.
Jan 17, 2010, 09:08 AM
Registered User
rhuber40's Avatar

msr


Around 200 flights, have not broken anything. Flew it into the dogs water, came out dried it with my monokote heat gun (Carefully, Take the canopy off before you try this and hold the heat gun no closer that 2 feet from the board)
Smelling like a rose; no problems since.
Jan 17, 2010, 12:06 PM
Blade mSR freak
hydro_pyro's Avatar
Mine died after one week of flying. First, the antenna wire fell off (why to they wrap it around a thin plastic part that can wiggle and vibrate??) An unlucky crash a few days later killed the 5-in-1, probably from part of the LHS r/c track striking a component on the board during an unlucky crash.

The stock canopy does not fit. It rubs up against the board, and provides minimal protection against common household objects jabbing under the edge of the canopy and damaging the fragile SMD components and/or the servo gears.

Here's my fix for the board fit problem: https://www.rcgroups.com/forums/show...&postcount=309
Jan 17, 2010, 02:26 PM
Registered User
Quote:
Originally Posted by hydro_pyro
Mine died after one week of flying. First, the antenna wire fell off (why to they wrap it around a thin plastic part that can wiggle and vibrate??) An unlucky crash a few days later killed the 5-in-1, probably from part of the LHS r/c track striking a component on the board during an unlucky crash.

The stock canopy does not fit. It rubs up against the board, and provides minimal protection against common household objects jabbing under the edge of the canopy and damaging the fragile SMD components and/or the servo gears.

Here's my fix for the board fit problem: https://www.rcgroups.com/forums/show...&postcount=309
I copied you as soon as I saw that post the other day. ;D

Thanks!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Poll MSR 5in1 Mother board? Hellysmack Micro Helis 10 Jan 14, 2010 01:07 PM
Wanted dead blade msr 5in1 (or motor connectors) sideburn Aircraft - Electric - Helis (FS/W) 2 Nov 06, 2009 04:38 PM
Discussion How do you know it’s time to replace the blade grips on your MSR? mikeflys Micro Helis 6 Sep 20, 2009 09:32 PM
Discussion How do you have your mic hooked up? jsullivan05 FPV Talk 8 Sep 03, 2009 01:17 AM