Oct 24, 2012, 11:00 AM
Registered User
stuntflyr's Avatar
Nice job!
You'll find this model pretty easy to fly compared to sport ships and trainers.
Chris...
Sign up now
to remove ads between posts
Oct 28, 2012, 09:34 AM
Registered User
Well, that's good to hear. I just crashed a sport plane from losing orientation and will be pretty nervous when I maiden the Osiris, which is basically now done.

What is the recommended protocol for connecting the motor at these high currents? My motor distributor said to skip the bullet connectors and solder with motor and ESC wires directly. I've done that but then there are fewer options for feeding the ESC into the fuse unless you solder the wires with the ESC and motor already installed.
Oct 28, 2012, 10:28 AM
Registered User
stuntflyr's Avatar
Well,
If you're still having trouble with orientation I'd fix the Trainer and keep flying it. The Osiris is a model that needs a pilot that is secure in orientation, take offs and landings.

The Osiris is a "neutrally stable" design, this means it stays going where it is pointed.

Trainers are "positively stable" which is it tends to right itself. When in a bank it levels it's wings, in a dive it raises it's nose, etc.

My suggestion is to epoxy that trainer back together and and fly it every day that you can. Practice flying in a straight line parallel to the runway 100 yards out and reversing your direction by doing a vertical maneuver like a reverse half cuban eight or a half cuban eight and coming straight back over that same line you flew, over and over and over until you can nail that thing.

If that is too boring, spice it up with a loop in the center of one pass, roll the next. This will help in the discipline of orientation and teach you to use all controls including the rudder to keep the model going where you want it. Mostly!

I didn't solder my motor leads to my ESC, I used the bullets. They're very low resistance and like you've determined it makes mounting a lot easier. I use an arming plug mounted externally between the ESC and the battery, and deans connectors to connect the battery.

Do you have a Pattern pilot to help you? Even if you don't intend to compete, the discipline of handling the model precisely is worth a lot in general flying.

Chris...
Oct 28, 2012, 02:33 PM
Registered User
Will do, Chris. Thanks for the advice.

David
Oct 28, 2012, 02:58 PM
Team 3DHS / Team JR
Bivens's Avatar
Also, once you do get ready.....don't forget that there's a 47" size that's much less investment...if you want to start with something less pricy after the trainer.
Nov 01, 2012, 02:12 PM
Registered User
Two nice flights on my new Osiris 47" today! What a difference from the sport plane (Pulse). Hit the rudder and the plane doesn't dive and roll. I think I'll stay the 47 for a bit before moving to the 62.

I have the blue, and at times it was hard to see, but the sky was cloudy- white and I probably need to keep it closer in.

Hacker A30-14L
Hacker X70 (from the dear departed Pulse)
4S 3300
Nov 01, 2012, 03:00 PM
Team 3DHS / Team JR
Bivens's Avatar
Quote:
Hit the rudder and the plane doesn't dive and roll.
That's true of almost all good aerobatic planes with a solid and easy-to-fly design...ALL 3dhs planes for sure have low or zero coupling...but pattern planes for sure.
Nov 02, 2012, 07:00 PM
Registered User
HouseOf4Doors's Avatar

CA Hinges


Plane's OK after an unplanned arrival but tore my rudder off. Any idea where to get CA hinges to reattach the rudder?

Thanks,

bp
Nov 03, 2012, 08:56 AM
MD1 HACK
joshet89's Avatar
LHS usually has that sort of thing if not http://www3.towerhobbies.com/cgi-bin...P?I=LXK110&P=8
Nov 05, 2012, 02:41 PM
Registered User
stuntflyr's Avatar
Quote:
Originally Posted by Neko View Post
Two nice flights on my new Osiris 47" today! What a difference from the sport plane (Pulse). Hit the rudder and the plane doesn't dive and roll. I think I'll stay the 47 for a bit before moving to the 62.

I have the blue, and at times it was hard to see, but the sky was cloudy- white and I probably need to keep it closer in.

Hacker A30-14L
Hacker X70 (from the dear departed Pulse)
4S 3300
Wow Neko,
You're a go getter. Good plan with the 47", you'll notice red and white or red and yellow models are more visible. Best of luck.
Chris...
Nov 05, 2012, 09:10 PM
Registered User
Wow Neko,
You're a go getter. Good plan with the 47", you'll notice red and white or red and yellow models are more visible. Best of luck.
Chris...


Thanks, Chris. I'm still in the manic phase. I've only been back in the sport for 6 weeks (had only a few weeks of flying 5 years ago). Trying to make up for lost time before the weather closes in, so I'm lurking on the forums, trying to build up the hangar and practicing every day on the simulator. Having a blast.

David
Nov 07, 2012, 01:32 AM
Registered User
Husafreak's Avatar
Anyone have numbers for the F3A braking for this Osiris? I am using a CC ESC but if anyone has a braking percentage they are happy with I could start there, thanks. Maiden tomorrow, should be a piece of cake.
Nov 07, 2012, 01:36 AM
Registered User
Quote:
Originally Posted by Husafreak View Post
Anyone have numbers for the F3A braking for this Osiris? I am using a CC ESC but if anyone has a braking percentage they are happy with I could start there, thanks. Maiden tomorrow, should be a piece of cake.
about 15 ~ 30% depending on the weight and personal preference on Hacker outrunners
Nov 07, 2012, 10:18 AM
Registered User
Husafreak's Avatar
Thanks, its light so I'll start at 15.
Nov 08, 2012, 03:33 PM
Canard Driver
R.A.P.'s Avatar

3dHS Pattern plane


I hope some one who is knowledgeable can help me with this A/C ? I got this as an estate liquidation It's a gorgeous plane well prepared but missing the bottom pan!
I have spent quite a bit of time looking for the Manufacture in hopes of
ordering a replacement pan but no luck.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Whoops! Totaled pattern plane lucasavaitor Fuel Plane Talk 17 Dec 29, 2009 01:19 PM
Discussion Washout for sport/pattern plane? Taktas Modeling Science 22 Dec 24, 2009 06:31 AM
For Sale pattern plane john howard Aircraft - Fuel - Airplanes (FS/W) 4 Dec 11, 2009 06:48 AM
For Sale 3DHS Asprea Pattern Plane Andrew Jesky Aircraft - Electric - Airplanes (FS/W) 3 Feb 21, 2009 08:51 PM
Discussion Talon 62 pattern plane plans fomieforme Foamies (Scratchbuilt) 4 Feb 14, 2007 11:42 AM