3DHS 62" Osiris Pattern Plane - Page 208 - RC Groups
Thread Tools
Sep 17, 2012, 12:12 AM
Team 3DHS / Team JR
Bivens's Avatar
Quote:
Originally Posted by hone1er
Anyone know if i can use a motrofly 4315-480 on 5s with a 16x10? I want to set one of these up to run on 5s 5000s.
I think that's what I have in mine....but run it on 6s....

I do need to double check the motor number first.....I'll possibly check it out tomorrow evening for you. On 6s, mine's FAST....5s may be more "normal"....
Sign up now
to remove ads between posts
Sep 17, 2012, 12:14 AM
Team Twisted!
hone1er's Avatar
I might go 6s. I have a bunch of 6s 3300-3600s. If you can, check what prop you have on there too. CG is no problem with this setup?
Sep 17, 2012, 12:18 AM
Team 3DHS / Team JR
Bivens's Avatar
I'm running 6s 4000 to 5000 on a 16x10 or `6x12 depending on how fast I want to go....plenty of room to slide my pack back or forward for me.

I'll look into the motor tomorrow and see.
Sep 17, 2012, 12:23 AM
Team Twisted!
hone1er's Avatar
Quote:
Originally Posted by Bivens
I'm running 6s 4000 to 5000 on a 16x10 or `6x12 depending on how fast I want to go....plenty of room to slide my pack back or forward for me.

I'll look into the motor tomorrow and see.
Thanks
Sep 20, 2012, 12:53 AM
Registered User
Husafreak's Avatar
Finally went ahead and got an Osiris, always wanted one, 3DHS is having a sale to support the US pattern team, the kits are 320 and 20 of that goes to the team. I am just happy to help out! Now I gotta go thru this thread and see what AJ put in his personal plane for power/prop/batteries. That's what I'm going to do.
Sep 20, 2012, 09:15 AM
Registered User
Quote:
Originally Posted by Husafreak
Finally went ahead and got an Osiris, always wanted one, 3DHS is having a sale to support the US pattern team, the kits are 320 and 20 of that goes to the team. I am just happy to help out! Now I gotta go thru this thread and see what AJ put in his personal plane for power/prop/batteries. That's what I'm going to do.
Make sure to set the H Stab at 0 incidence. no more than 0.5 degree difference between the wing and stab. Use a lot of expo on rudder if you plan on competing with it.
Sep 20, 2012, 09:59 AM
MD1 HACK
joshet89's Avatar
Quote:
Originally Posted by PatternFlyer
Make sure to set the H Stab at 0 incidence. no more than 0.5 degree difference between the wing and stab. Use a lot of expo on rudder if you plan on competing with it.
Did you adjust the incidence on your Osiris?
Sep 20, 2012, 10:50 AM
Team 3DHS / Team JR
Bivens's Avatar
Quote:
Originally Posted by PatternFlyer
Make sure to set the H Stab at 0 incidence. no more than 0.5 degree difference between the wing and stab. Use a lot of expo on rudder if you plan on competing with it.
Quote:
Originally Posted by joshet89
Did you adjust the incidence on your Osiris?
This I've gotta hear.....how exactly did you do this?
Sep 20, 2012, 11:04 AM
MD1 HACK
joshet89's Avatar
Thats what I was thinking Bivens...
Sep 20, 2012, 02:05 PM
Registered User
Husafreak's Avatar
Shims? LOL I must be getting old.
Sep 20, 2012, 08:09 PM
Team 3DHS / Team JR
Bivens's Avatar
Quote:
Originally Posted by Bivens
I think that's what I have in mine....but run it on 6s....

I do need to double check the motor number first.....I'll possibly check it out tomorrow evening for you. On 6s, mine's FAST....5s may be more "normal"....
Motrolfly 4320-450 on mine.....16x12 is a rocket....very fast. 16x10 or even 15x10 are OK.
Sep 20, 2012, 08:39 PM
Registered User
What is the recommended wing incidence relative to the horizontal stabilizer? My new Osiris has a -1degree. I'm sure it should not be negative. I think I remember from the AJ video it should be a +.6
Sep 24, 2012, 10:23 PM
You down with EPP?
johnnyrocco123's Avatar
Quote:
Originally Posted by PatternFlyer
Lack of information on Vanquish? RCGroups? Maybe.
http://www.rcuniverse.com/forum/m_10516528/tm.htm
There is 42-page thread about it at RCUniverse.

Pattern related thread are mostly at RCU not RCGroups.

Osiris 2m is the one that lacks info. No pictures of build quality. Flying in FAI/Masters hands will be almost always good.

I think flying is personality.
If it doesn't fit your flying style, it will never work unless you adjust yourself.

Vanquish from my point of view so far is not my type, so I sold it. Somebody does well with it is his personality.

Not sure if Osiris 2m is going to be one that I will like. If it flys like 62", I probably will not buy one for myself. After the last contest of the season, I will be working on some extra stuffs on my 62" as experiment to see if it improves.

If it doesn't have adjustability, I will not buy to fly competition.

What don't you like about the 62" Osiris?

It was the best flying ship I ever owned. It made me look too good.
Sep 25, 2012, 07:05 PM
I drank it, and it is good.
Quote:
Originally Posted by Bivens
Motrolfly 4320-450 on mine.....16x12 is a rocket....very fast. 16x10 or even 15x10 are OK.
That's what I'm looking for, a rocket on 6s. Thanks Bivens!
Sep 25, 2012, 07:37 PM
Foam Is Where The Heart Is.
homiefoamie's Avatar
Mine is a rocket on 6s. Scorpion 4025-12, Ice 100


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Whoops! Totaled pattern plane lucasavaitor Fuel Plane Talk 17 Dec 29, 2009 02:19 PM
Discussion Washout for sport/pattern plane? Taktas Modeling Science 22 Dec 24, 2009 07:31 AM
For Sale pattern plane john howard Aircraft - Fuel - Airplanes (FS/W) 4 Dec 11, 2009 07:48 AM
For Sale 3DHS Asprea Pattern Plane Andrew Jesky Aircraft - Electric - Airplanes (FS/W) 3 Feb 21, 2009 09:51 PM
Discussion Talon 62 pattern plane plans fomieforme Foamies (Scratchbuilt) 4 Feb 14, 2007 12:42 PM