Thread Tools
Old Apr 09, 2011, 04:20 PM
steliosh is offline
Find More Posts by steliosh
www.steliosh.net/rcmoto/
steliosh's Avatar
Managed to edit a little footage onboard my KP10...
The motor is 17.5T, the rear tire PMT100, the weather cold, the track slippery... oh well!

KP10 at FRT Track, stamata, Greece, onboard filming (3 min 2 sec)
Sign up now
to remove ads between posts
Old Apr 17, 2011, 11:07 PM
2000-redrider is offline
Find More Posts by 2000-redrider
Registered User
2000-redrider's Avatar
Ran my 1/5 and 1/8 scale bikes, at our local lot today. I managed to ding up my KP scratch bar mounts pretty well, though. I decided to give running without bars a go, so whenever I fell over they would get scraped up. So much so, that I couldn't get the bars back in. It's not too bad though, a little bit of filing and they'll be back to normal. I actually ran without bars a lot better than I thought I could. Even managed to run several laps of our "regular" track layout. Got me to thinking that instead of figuring out better scratch bars and bar placement, maybe we should try figuring out how not to use them.

I can also report that the fabric paint that I used to repaint my Venom rider worked very well. I tumbled many times and paint stayed on very well. It didn't scrape of flake off. I definitely think that's the stuff to use if you plan on repainting.
Old Apr 17, 2011, 11:58 PM
Gecko Hunter is offline
Find More Posts by Gecko Hunter
Registered User
Gecko Hunter's Avatar
Got to run the KP09e on Friday at the local Track.

I ran a new fairing set I had done up in Scwantz Pepsi colours.
I also got to test a new slipper clutch constructed by Scaulfi which seemed to run real well also.

I'm pretty sure it helped refine the consistency of my lap times which was good.

I have attached a couple of images of the bike, I don't have a schwantz rider so at the moment Anthony West is doing a guest ride

Also got to run the GPV 1 which ran really well, myself and another guy where having a hoot around the short course that we call the Pork Chop.
Old Apr 18, 2011, 01:20 PM
JohnnyMc is offline
Find More Posts by JohnnyMc
RC Dirt Bike Action
JohnnyMc's Avatar
Quote:
Originally Posted by 2000-redrider View Post
I can also report that the fabric paint that I used to repaint my Venom rider worked very well. I tumbled many times and paint stayed on very well. It didn't scrape of flake off. I definitely think that's the stuff to use if you plan on repainting.
Cool. Did you apply a base coat of a particular color first? Airbrush or paintbrush?? How many coats applied?
Old Apr 18, 2011, 02:05 PM
2000-redrider is offline
Find More Posts by 2000-redrider
Registered User
2000-redrider's Avatar
Quote:
Originally Posted by JohnnyMc View Post
Cool. Did you apply a base coat of a particular color first? Airbrush or paintbrush?? How many coats applied?
No, I didn't use a base coat. Probably would have been a good idea, since my overall color was white. You can still see some of the underlying color (green) if you look really hard. A base coat of a light gray may of helped hide that. I brush painted everything. Not sure on the exact number of coats. I just kept applying until I was happy. If I had to put a number on it though, I would say about 4 coats. The paint I used is called Soft fabric paint, by Tulip. You should be able to find it, or something similar at a craft store. I found it a Michael's.
Old Apr 21, 2011, 09:07 PM
HECTOR2369 is offline
Find More Posts by HECTOR2369
Registered User
I did! today,yesterday and a day before!

Old Apr 22, 2011, 01:42 AM
steliosh is offline
Find More Posts by steliosh
www.steliosh.net/rcmoto/
steliosh's Avatar
I wish my (to be honest... neglected a bit!) GPV1 would run so smoothly!!!!
Old Apr 22, 2011, 03:01 AM
test driver is offline
Find More Posts by test driver
Registered User
ran my Mclarney today after remaking the carbon side chassis pieces because I snapped the bike in half last weekend. all good now and handling as good as ever.
Old Apr 24, 2011, 10:58 AM
deen247 is offline
Find More Posts by deen247
Registered User
just got back having run all my bikes today both kyoshos and both gp1 was great fun until the kysho hor chewed up its gears after about five mins use i thought that might happen just went brushless with it ha never mind there is always tomorrow
Old Apr 24, 2011, 03:07 PM
Appel82 is offline
Find More Posts by Appel82
Registered User
Appel82's Avatar
Nice day to drive SB5 .. BUT I realy hate the ACE 1016MG brake servo ! ... 2 servo broke !

Old Apr 24, 2011, 03:17 PM
steliosh is offline
Find More Posts by steliosh
www.steliosh.net/rcmoto/
steliosh's Avatar
Are these Graham's tyre warmers?
And are you using 12+ Volts to power them?
Old Apr 24, 2011, 06:15 PM
Appel82 is offline
Find More Posts by Appel82
Registered User
Appel82's Avatar
this is tirewarmers from Gregor (RC-Motorradshop.de)

Yes 12v
Last edited by Appel82; Apr 24, 2011 at 06:23 PM.
Old Apr 24, 2011, 08:20 PM
swheels is offline
Find More Posts by swheels
Registered User
swheels's Avatar
Ran my ttn for a short bit. Got alot of work to do. Other than that the suspension did it's job.
Old May 01, 2011, 05:54 AM
Akura2 is offline
Find More Posts by Akura2
PROFESSOR TRUTH JIMMY ICE
Akura2's Avatar
I drove my bike today to sort out my slipper clutch and to do some more testing,,, I love my SB5!
Old May 05, 2011, 04:37 PM
HECTOR2369 is offline
Find More Posts by HECTOR2369
Registered User
I did today.....and also had a Crash with the Camara...



Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Cool Did an AV today with my wing and gum cam Dave Barrow Aerial Photography 2 Dec 29, 2009 11:23 PM
Discussion Did you use it today? happytoyco Electric Heli Talk 0 Aug 04, 2006 08:18 AM
Alert Bluffman! P/U your Mig 3 fuse today! target Slope 0 Feb 19, 2006 02:27 PM
So...What did U take to the park today??? birdofprey Parkflyers 43 Oct 21, 2003 01:51 AM