Thread Tools
Old Jan 02, 2010, 11:59 PM
Legot is offline
Find More Posts by Legot
Build to Fly? FLY to BUILD!
Legot's Avatar
Discussion

removing gorilla glue?


Ok, so I'm building a DUmas DH 89 Raphide, and I accidendtly glued most of the wing spars on one wing backwards...with gorilla glue...so from my reasearch I'm pretty much screwed.

DOes anyone have any war of removing the stuff without cutting or scraping?
(the spars are slotted in)

THanks
~Legot~
Sign up now
to remove ads between posts
Old Jan 03, 2010, 01:20 AM
rick.benjamin is offline
Find More Posts by rick.benjamin
Reduce the drama...
rick.benjamin's Avatar
I don't know what would debond Gorilla Glue.
I would get a hobby saw blade to cut a tiny bit of the glue.
Then a wiggle should break the bond.
I like this razor saw blade
http://www3.towerhobbies.com/cgi-bin...?&I=LXKX92&P=7
Careful, the blade is as sharp as a scalpel.
Old Jan 03, 2010, 02:50 AM
Xpress.. is offline
Find More Posts by Xpress..
Team Hitec, Customer Support
Xpress..'s Avatar
Don't know of any solvents that will dissolve it. Your only option is to cut it


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion CA, hot glue, or gorilla cgage The Builders Workshop 6 Dec 09, 2009 03:53 AM
Discussion Gorilla glue solvents? SteveC68 The Builders Workshop 1 Dec 08, 2009 08:09 PM
Discussion Gorilla glue. Steve Mills The Builders Workshop 14 Nov 15, 2009 05:06 AM
Discussion Gorilla Super Glue. St Synn The Builders Workshop 4 Sep 30, 2009 01:48 PM
Question removing paste/glue on EFLH1024 Riktar Coaxial Helicopters 0 Sep 01, 2009 07:51 PM