Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Dec 29, 2009, 11:46 PM
FlyAce is offline
Find More Posts by FlyAce
Registered User
Help!

PZ BF-109 Flaps DX7 Setup


Can anyone help me setup flaps on the PZ BF-109 with a DX7? It comes with an AR500 with gear and aileron open. I can use the gear channel but that only gives me two positions. Is it possible to use the flap(system) three position switch with that receiver? If so, how?
Thanks.
Sign up now
to remove ads between posts
Old Dec 30, 2009, 01:32 AM
Xpress.. is online now
Find More Posts by Xpress..
Team Hitec, Customer Support
Xpress..'s Avatar
Quote:
Originally Posted by FlyAce View Post
Can anyone help me setup flaps on the PZ BF-109 with a DX7? It comes with an AR500 with gear and aileron open. I can use the gear channel but that only gives me two positions. Is it possible to use the flap(system) three position switch with that receiver? If so, how?
Thanks.
The AR500 is only a 5 channel receiver, which means the GEAR channel is setup to run on the GEAR channel in the radio. You need to slave the GEAR channel in the radio to your 3 position switch
Old Dec 30, 2009, 07:55 AM
powerlines is offline
Find More Posts by powerlines
I am ready for HHAEFI!!
powerlines's Avatar
I would start by INH the gear.. Then setting a program for flaps to gear you can adjust the up and down by the travel adjust..

did you cut flaps in it.. or using flaperons..
Old Dec 30, 2009, 10:23 AM
FlyAce is offline
Find More Posts by FlyAce
Registered User
Quote:
Originally Posted by powerlines View Post
I would start by INH the gear.. Then setting a program for flaps to gear you can adjust the up and down by the travel adjust..

did you cut flaps in it.. or using flaperons..
It comes ready for flaps. Just need to add servos and make a cut between the aileron and the flap. Can you be more specific about programming?
Thanks.
Old Dec 30, 2009, 04:35 PM
FlyAce is offline
Find More Posts by FlyAce
Registered User
I got the programming all figured out.

Thanks!


Mix 4:
gear--gear
rate -100%
-100%
sw: on
offset 0

(this will shut off the gear switch

Mix 5
flap -- gear
rate-- + 100%
+ 100%
sw - on
offset 0
Old Jan 05, 2010, 08:12 AM
tubamike78 is offline
Find More Posts by tubamike78
Registered User
tubamike78's Avatar
you may also want to programe some down elevator into that also, don't know how much until you try it, but you could do that on the next mix. flap--elevator.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Start Micro PZ size Spanish Civil War Bf-109 mtflyr Scratchbuilt Indoor and Micro Models 27 Jan 23, 2010 08:45 PM
Yippee! 1/72 Scale BF 109 Pic's + VIDEO !!!!!! epicdoom Scratchbuilt Indoor and Micro Models 44 Dec 28, 2009 06:02 AM
Sold Parkzone BF-109 Receiver Ready $175.00 shipped Mikey 68 Aircraft - Electric - Airplanes (FS/W) 1 Dec 05, 2009 01:37 PM
Wanted kyosho bf-109 retracts drh024 Aircraft - General - Miscellaneous (FS/W) 0 Dec 05, 2009 01:02 AM
Sold Parkzone BF-109 RTF with Futaba System $400.00 shipped Mikey 68 Aircraft - Electric - Airplanes (FS/W) 2 Dec 03, 2009 10:29 AM