Thread Tools
Dec 21, 2009, 04:26 PM
AKA RustyKnee
Discussion

RX Choice in Kong Fu/Topsky 1.0?


Hi,

I have recent;y got a 2.4 tranny (a MPX Royal evo m-link) and my old 35 Mhz MPX cockpit sx. the smallest rx in mlink at the moment is the 6 channel which is
Dimensions (L x W x H) approx. 38 x 28 x 11,5 mm
Weight approx. 10 g

is that too big or should I go with a micro rx ( i have a couple of corona 4 channel synths which seem to work well).

Stu
Last edited by Stuart B; Dec 21, 2009 at 04:27 PM. Reason: spelling
Sign up now
to remove ads between posts
Dec 21, 2009, 04:33 PM
Registered User
Your receiver is fine. I am using Electron 6 ~ 12g, no case in Topsky 1.0. And still need nose weight.

Tai
Dec 21, 2009, 04:35 PM
AKA RustyKnee
Quote:
Originally Posted by tai626
Your receiver is fine. I am using Electron 6 ~ 12g, no case in Topsky 1.0. And still need nose weight.

Tai
cool, cheers fella.
Dec 21, 2009, 09:15 PM
wzg_zxl's Avatar
i use berg7, 4.8v 300mah Nimh(weight 30 grams), 2 futaba 3114 servors in the pod,and 2 D-47 servors in the wing.4~5 grams nose weight.
Dec 22, 2009, 03:02 AM
AKA RustyKnee
Quote:
Originally Posted by wzg_zxl
i use berg7, 4.8v 300mah Nimh(weight 30 grams), 2 futaba 3114 servors in the pod,and 2 D-47 servors in the wing.4~5 grams nose weight.
Thanks. The postman turned up with her 10 minutes ago! very cute....the glider not the postman!

This one is jumping the build queue.

Stu


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question 50% to 0% battery in 10 min when flying ruffo Batteries and Chargers 18 Dec 19, 2009 07:09 PM
Gallery Tank Meeting in Hong Kong (2009-11-29) hatakashi RC Tanks 4 Dec 14, 2009 12:45 PM
I/R rx.....0,3 gr AM rx......0,5 gr FM rx !! bmaaa Scratchbuilt Indoor and Micro Models 8 Dec 13, 2004 03:27 PM
1 more RX choice..hitec hfs-04 radcast2 Radios 4 Dec 13, 2004 02:49 PM
FS- Any interest in a complete unbuilt GWS Corsair FU-4 - with Rx, esc, and servos? Etonic Aircraft - Electric - Airplanes (FS/W) 6 Dec 29, 2003 09:08 PM