Thread Tools
Dec 20, 2009, 03:00 PM
Registered User
New Product

New Camera Mount


Hello all,

I have make a new Cameramount with Roll/Nick Compensation.

For more Info Visit http://powerframe.de/kamera/RollNick/kamera-roll.html

A Test-Video on RC-Movie:http://www.rcmovie.de/video/ca518643...terung-im-Test ist the same as on the HP!

Comments are welcome, even negative
Last edited by Mixer111; Dec 20, 2009 at 04:37 PM.
Sign up now
to remove ads between posts
Dec 20, 2009, 03:48 PM
Inciting Riots
village_idiot's Avatar
Interesting, and nice work with the CNC.
Dec 20, 2009, 05:40 PM
Registered User
Very well done. Would be perfect for Quadcopters, as there is no need for pan.

Are you planning to sell them?
Dec 21, 2009, 05:59 AM
Registered User
Hi Ben1101,

The pan is goods in process.
I think this is ready in about 2 or 3 weeks.
Dec 21, 2009, 06:06 AM
//----\\
Coil's Avatar
Hi, will it be commercially available in europe ?
Dec 21, 2009, 06:54 AM
Registered User
rimshotcopter's Avatar
Very Impressive, looking forward to seeing videos from this state of art mount.
Dec 21, 2009, 10:08 AM
Registered User
Hi Sukalo,
Quote:
Originally Posted by Sukalo
Hi, will it be commercially available in europe ?
This Mount will be e in 2-3 weeks in our shop.
We ship worldwide
Dec 21, 2009, 11:14 AM
Inciting Riots
village_idiot's Avatar
Could you make it lighter by removing the spacers inside the box construction? If you glued the plywood it should be more than strong enough and you would probably drop a few ounces in the process. Maybe one or two bulkheads would be required but it should still work out to be lighter.
Dec 21, 2009, 11:31 AM
Registered User
Hi village_idiot,
Quote:
Originally Posted by village_idiot
Could you make it lighter by removing the spacers inside the box construction? If you glued the plywood it should be more than strong enough and you would probably drop a few ounces in the process. Maybe one or two bulkheads would be required but it should still work out to be lighter.
True, you can to bond it. This will save you approximately 30-40g weight.
The aim was to develop but a construction which is easily repaired in damage.
And so we succeeded. The assembly as a kit takes about 1 hour.
Now you you can calculate how long a repair takes
Dec 21, 2009, 11:34 AM
Inciting Riots
village_idiot's Avatar
I see your point, repair would be difficult without the screws.
Dec 24, 2009, 07:42 PM
Smoke on , go !
zaguruinzasky's Avatar
why wood and not CF ?
Dec 24, 2009, 08:23 PM
Registered User
txflyboys2's Avatar
Hey Mixer, nice mount? Do you have a price in U.S. dollars?? Thanks!

Larry
Dec 26, 2009, 10:41 AM
Registered User
Hi zaguruinzasky

Why wood and non Carbon, simply because of the weight.
A Carbon variation but there are also.
See here :

Hi txflyboys2,

The price is 239,- Euro for wood and at 279,-Euro for carbon.
This is around 344.40 USD for wood and 402.10 USD for Carbon.
Dec 27, 2009, 11:29 AM
Studies the wind
ghoti's Avatar
I would like a picture on an airplane with camera. Nice work. Bill
Dec 27, 2009, 01:03 PM
Smoke on , go !
zaguruinzasky's Avatar
Quote:
Originally Posted by Mixer111
Hi zaguruinzasky

Why wood and non Carbon, simply because of the weight.
?? do you mean that wood version is lighter?
Thanks


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion camera mount for sale airfoil pro 1 plus extras domismooth Electric Heli Talk 0 Dec 01, 2009 04:55 PM
For Sale NEW Camera Mount AIRFOIL Pro1 + extra domismooth Aircraft - Electric - Helis (FS/W) 0 Dec 01, 2009 04:50 PM
For Sale Creative Vado HD Camera + Free camera mount (Slow Stick, EasyStar, Universal) crd Aircraft - General - Miscellaneous (FS/W) 3 Nov 01, 2009 06:58 PM