newest member of my fleet , a logo 10 - RC Groups
Thread Tools
May 08, 2003, 09:15 PM
misskimo's Avatar

newest member of my fleet , a logo 10

hey , just got all the radio gear after I bought the logo from a fellow that put about 20 flight on it , what I bought was logo built , servos 3 hitec MG 85s , aveox 36 30 1.5 , a set of carbon blades , and 2 2400s battery packs , 1 12 cell and 1 14 cell for 475 bucks shipped , not a bad deal huh? heres a picture .
Sign up now
to remove ads between posts
May 08, 2003, 09:28 PM
Krona's Avatar
Thats a good deal.
And it's looking good too.
Last edited by Krona; May 08, 2003 at 09:33 PM.
May 08, 2003, 09:29 PM
3D Is Cool
Allex's Avatar
sweet deal there
And hey! Welcome to the family
May 08, 2003, 09:47 PM
Powered by ThunderPower
Chachin's Avatar
Very nice misskimo, congrats!

I just got in a set of CF blades that look just like yours . Looks like we'll be having some fun this weekend.

Let us know how you like your new "toy."

May 08, 2003, 09:53 PM
fig8's Avatar
Very nice tony, those MAH blades are sweet flying. I use them also.

May 08, 2003, 10:19 PM
Registered User
SkyHawke's Avatar

That is a great deal and a great looking heli!

I am a "Logo-Researcher" right now, I love to hear about deals like this and read about performance, capabilities, problems, etc. ..

Good luck,

May 08, 2003, 10:38 PM
misskimo's Avatar
hey , thanks yall , havent been but 30 minutes and 4 post , this logo does rock , but I need to make sure I have everything set right before I start her up , first off I have a aveox motor and a schulze 45 HO that Tarken was having heating problems with , he was useing a hot B50 11L so I need to make sure I have this speedcontroller set in the Freq. and the right mode for Aveox , instructions SUCK for this speedcontroller , any good tips of setting the Freq. and mode yall ? Tony
May 08, 2003, 11:20 PM
1.21 Gigawatts!
Steph280's Avatar
The instruction may not be perfect, but that ESC is excellent. How you set the timing/frequency will depend on which version of software you have. I just got mine updated and it is DRASTICALLY different. Just set it up once and forget about it, where the old software will need you to arm the motor with throttle at certain position.

I don't think you will have overheating problems in Alaska.

May 09, 2003, 02:48 AM
Our Daddy and Heli Junkie
Fred Bronk's Avatar
Hey Tony, Its about time!! Just don't hit the ceiling.

See yah got a futaba gyro on it too.

Don't discount the wood blades for basic flying, the work fine.
May 09, 2003, 03:15 AM
AMA 46133
Gorgeous machine and a damn good price! Mine is not even decorated yet.;-)
May 09, 2003, 03:35 AM
Renewed interest
ozace's Avatar
welcome to the club

May 09, 2003, 04:43 AM
"Watch this!" SMACK!
jaggies's Avatar
Hey Tony, congrats on a fine machine. Wish I got that deal on mine

Go fly it. You'll love it.

Are you going to try the LiPoly on it?

When are you coming back to Ca? Hopefully we can hook up next time.

May 09, 2003, 04:57 AM
misskimo's Avatar
hey , well just tried it , looks like Tarkan got a limon , after 1 minute at 85 % gov mod she shut down of over heating , 185 on the temp gun , in the gym , outside maybe I could have gotten 2 minutes , but I was just hovering and was going to shut it down after 2 minutes and check the temp , head speed good , around 1600 , alittle tail heavy , but she was sweet , I have a kontronics 40 6 to 12 , Ill throw on her next and send that one off for repair and get the new softwear for it , where do I send it too ? o yeh I did the throttle up when I plugged the batteries up and she beeped 3 times and pulled the throttle back and she beeped 1 , is that right ? Tony
May 09, 2003, 01:08 PM
Registered User

Sweet deal, you are gonna love the machine!

That's pretty high head speed for 85% governer, maybe a different pinion? Also, make sure the gear meshes are not too tight (but you already thought of that...)

Glad to see your already a memeber at the Logo forum, that place is getting more and more active every day.

May 09, 2003, 01:37 PM
Registered User
SkyHawke's Avatar
Where is the "Logo Forum"?


Thread Tools