Things that need to go so i can buy more things Baja 5b and more - RC Groups
Thread Tools
This thread is privately moderated by Timmahh, who may elect to delete unwanted replies.
Dec 15, 2009, 10:40 PM
Trader Rating: 4
Registered User
For Sale

Things that need to go so i can buy more things Baja 5b and more

shipping included in the USA, all others ask for a shipping quote. i have other things i will be adding to this f/s thread.

Castle Creations 7700Kv motor. New never ran, but has been mounted. has 2 small scuffs at rear plate on can. SOLD

Dark Soul Wheel Nuts, SOLD

RAMTech Enclosed Carrier. SOLD to Mo FoYo

i also have a RAMTech Open Carrier avialable. 9/10 condition, will have fresh repacked TFE bearings installed. 25.00

Modified RC Clutch Cover. Anod green, good physical condition. has some stuffs from use.

will combo the last RAMTech carrier and Modified RC clutch cover for 35.00

One Pair of New Mounted but never ran Imex Front 5T tires. these were mounted but never ran. includes a pair of rtr 5B front rims. NO FOAMS INCLUDED. 25.00 shipped

Next is a pair of MUST HAVE upgrades for your Baja drivetrain.

A 1-2 tank old RTR Diff that has been fit with a set of 4 tank old Turtle Racing Diff Saver cases. This Diff has had zero use since i built for a spare, but after nearly 2 yrs, i doubt i ll ever need it so off it goes to someone needing a solid diff and wants high quality.

the Diff is from a near new RTR Diff. I modded a rtr case and the TR Diff Saver cases on it. the diff cups are stock and show minimal wear..
2 of the threads in the 1/2 of the TR cases were stripped out by prior owner, so i have moddified 4 nylock nuts to fit into proper place and used slightly longer bolts to put the diff together. using all 4 nuts keeps the diff in balance. stock diff ring gear included as well as diff is filled with TFE Pro Bearings, and freshly cleaned, checked over and refilled with new HPI 1000w fluid.
Asking 85.00 for the Built and ready to use TR Diff.

I have a pair of PhatDad RC V3 drive shafts available now. the V2s in the pics below are gone. the V3s, which i ll have a pic of soon, are in great condition and have light use. got them in a deal with a local guy. Considering i have a set of V3s already, and have a set of V1 original prototypes that are still in excellent condition, i figure i would offer these to you forum guys for the very FAIR PRICE of 60.00 shipped.
i ll have a pic of the V3s very soon.

Jet Pro V4 Track Pipe. 7/10 condition. has a dent in the top from my TR Brace. performance is unhindered and pipe is in otherwise excellent condition

Jet Pro Dual Bleed side mount pipe.. SOLD

Fiego 4436Kv BL motor SOLD

have an EZRun BL ESC and 4600Kv motor SOLD

New never mounted used set of HPI Baja 5B Rear Foams. SOLD

Ask all questions. my feedback is well known.
Thanx for looking
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Charger info Silverexpress Micro Helis 1 Dec 12, 2009 01:49 PM
For Sale Baja 5B J328 Cars - Cars and Parts (FS/W) 1 Nov 30, 2009 11:07 AM
For Sale Garage Sale: Baja 5B items and Nitro items and MORE, NEED TO SELL! Timmahh Cars - Cars and Parts (FS/W) 4 Nov 01, 2007 07:00 PM
Cool A list of things that can go wrong powerditto Power Systems 5 Dec 03, 2005 01:33 PM