Thread Tools
Oct 13, 2010, 06:11 PM
Off playing tug
ChrisBowker's Avatar
Thanks for posting the video, The airspeed of your model is very impressive. Keep up the awesome work.

Chris
Sign up now
to remove ads between posts
Oct 14, 2010, 10:12 AM
Registered User
Lantsov Alexey's Avatar
Thank you Chris for your kind words.
I'm an aspiring pilot and me that is important.
This is the first flight, I felt the plane with 15 grams 250 ма battery.
(Turnigi 160 ма 30 с - very bad)
The flight was without air brakes and spoilers.
Soon I'll put hyperion 130 mA, air brakes, spoilers.
You will see a new result.
Nov 07, 2010, 03:51 PM
Registered User
Lantsov Alexey's Avatar
Hi all.
The plane is completely ready.
Put the batteries Hyperion 130 mA, weight 7.5 grams.
New video. F-3-P EXPERT
F-3-P Expert Ланцов Алексей (2 min 17 sec)
Nov 07, 2010, 09:03 PM
iumop ap!sdn w,I
G.P.'s Avatar
That is just amazing Lantsov! Thanks for sharing.
Nov 07, 2010, 11:02 PM
Goes to eleven!
JK13's Avatar
Wow - very impressive
It will be great to see where this goes!

Joe
Nov 09, 2010, 09:23 PM
Hot glue held together by foam
balsa or carbon's Avatar

Very impressive!


That video is fascinating, I've probably watched it a dozen times now! It almost looks as if the plane is flying underwater - so slow and graceful !
Nov 11, 2010, 07:38 AM
Aerodynamically challenged
3Deranged's Avatar
Excellent work Lantsov! Impressively S-L-O-W-W-W-W!! That's my kind of airspeed
Nov 11, 2010, 10:42 AM
Registered User
Wow, Very Nice! Is it delicate? I want one!!!
Nov 11, 2010, 10:51 AM
Registered User
nicolas pietu's Avatar
Hi Alexey,

Good flight !
I hope I will see you at IITOP 2011.

Regards,
Nicolas PIETU
Nov 11, 2010, 10:06 PM
Registered User
Lantsov Alexey's Avatar
Thank you for your kind words.
I was very helpful communication with Donatas,
Large aircraft and small weight make it easy to fly.
All I do is not a commercial project.
I'm ready to tell how to make such an airplane.
I have no secrets.
I will be flying in competitions in Byelorussia and Russia.
Go to European competition is very desirable.
Nov 12, 2010, 06:19 AM
Fly long and land softly
Jim_Marconnet's Avatar
I've looked at the pictures here, but I don't quite see how the apparently carbon fiber rods are connected together into the structure.

Are they simply glued together with some epoxy at the joints?

One trick in such a design would seem to be how to make many extremely light but strong accurate joints that don't interfere with the covering material.

Thanks for your sharing!
Jim Marconnet
Nov 12, 2010, 09:45 AM
there is no spoon...
Cap232ac's Avatar
I'm wondering about the little prop on the rudder. Is that for a drag brake?
Nov 12, 2010, 11:25 AM
Registered User

metrorcflying


My name is Keith Paskewitz and I fly a 4 ounce IFO with rudder control and side area added. It can do many great maneuvers.
I am very interested in building a plane like yours.
Where can I purchase 3 micron lavsan and what sizes of carbon fiber rods do you use?
Thank you,
Keith
PS
See my IFO at http://www.metrorcflying.com/metro_indoor-flying.htm
The video is partway down on the page.
Nov 12, 2010, 01:54 PM
Registered User
Lantsov Alexey's Avatar
Jim Read post number 6
Cap232ac, little prop on the Rudder is just a sense of humor
Metrorcflying, on an airplane "RELAX" I use a 1-mm and 0.6 mm bars, where to buy mylar I don `t know, I was presented with my friends.
Nov 12, 2010, 02:00 PM
Registered User
You fly very well. Have you crashed your new model yet? Does the carbon just flex and bend or does it tend to break? I'm new to indoor and durabilty is still important. Epp takes crash damage well, but it's heavier. Your model is so light that it should survive low speed crashes better. I like slow flying models because they make it easier for me to fly the maneuvers.

Thank you for your time

Michael


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log VIDEO ADDED: Pro Design F-18 Build MattinAZ Electric Ducted Fan Jet Talk 871 Jun 25, 2014 01:36 AM
Discussion EJF Composite F-86 Reco Electric Ducted Fan Jet Talk 11 Jan 08, 2010 02:23 PM
Question Composite Arf P-51 Engine ? ? ? dono Fuel Warbirds 0 Dec 04, 2009 05:36 PM
Idea Composite D Box Design j.m. Composites Fabrication 4 Sep 02, 2009 02:38 AM
Jet Design Contest entry #3 -- Messerschmitt Me P.1092/5 berniep1 Electric Ducted Fan Jet Talk 79 Nov 22, 2007 05:46 AM