New Products Flash Sale
Thread Tools
Old Jan 09, 2013, 05:04 PM
morozov is offline
Find More Posts by morozov
Registered User
My new project. 860mm Weight 30g
Sign up now
to remove ads between posts
Old Jan 14, 2013, 06:58 AM
Lantsov Alexey is offline
Find More Posts by Lantsov Alexey
Registered User
Lantsov Alexey's Avatar
Good work by Kimmo.
Old Jan 14, 2013, 08:57 AM
Kimmo Kaukoranta is offline
Find More Posts by Kimmo Kaukoranta
Registered User
Kimmo Kaukoranta's Avatar
Thanks Alexey! Some more info on my model, the design is a Trivia by Gernot Bruckmann. The construction is however from carbon and mylar, no depron.

I used mostly 1.0 and 0.7mm carbon micro tubing from DPP Pultrusion, more 0.7 than 1.0mm, I did not count how much I used, but there was not much left after the build ;-) The curved carbon rods in the fuselage I made by pulling carbon tow wetted with epoxy inside some flexible tubing and taped over a pattern cut out from depron. Everything is held together with kevlar thread. The covering is 3 micron mylar supplied by Alexey, attached with 3M 77, painted first with some white car paint and Faskolor airbrush acrylics.

The motor is one of my contra-rotating units with the 10" carbon props, twin YGE-7S esc's, Spectrum AR6100 and 3x Hitec-5035 servos. The battery is a Hyperion 2S 120mAh. Since the YGE-7S does not have a BEC and the Hitec servos do not like 7.4V, I have an external BEC set to 5.5V, made by Risto (Finnspeed here in RC Groups). The flying weight with the battery is a bit below 84g.

I really like the model, the only regret is that I now know several places where to save a few grams, maybe I need to build another to get below 80g.
Last edited by Kimmo Kaukoranta; Jan 14, 2013 at 09:28 AM.
Old Jan 15, 2013, 09:54 AM
leliommarino is offline
Find More Posts by leliommarino
leliommarino
leliommarino's Avatar
Quote:
Originally Posted by morozov View Post
My new project. 860mm Weight 30g
How did you do all the carbon to carbon gluing?
Old Jan 15, 2013, 05:25 PM
morozov is offline
Find More Posts by morozov
Registered User
Super Glue CA
Old Jan 20, 2013, 05:18 AM
Finnspeed is offline
Find More Posts by Finnspeed
F3A Team Finland
Finnspeed's Avatar
Quote:
Originally Posted by Lantsov Alexey View Post
My carbon fiber propeller 9х2 now manufactured in a factory.
Used for the manufacture of advanced materials. TeXtreme Carbon fabric 80 g / m
I tested one of these yesterday and they are very good. Compared to Glavak props this one behaves very much like the SG 9 x 2.8. I have not measured the pitch so I don't know which one has it correct but in the air the SG 9 x 2.3 revs much higher.

In any case the flight times and characteristics were similar to what I'm getting with the SG 9 x 2.8 in my RT Sirius Eleven. I'd say this prop works best with a light motor that has a Kv from 1500 to 1800.

My suggestions for improvements that would make these great props even better:
- a small hole in center would help in checking the balancing
- the fitment to a GWS size prop saver seems to be just a tad loose, probably less than 0.1 mm. I have not yet measured it.
Old Jan 21, 2013, 04:08 PM
morozov is offline
Find More Posts by morozov
Registered User
continuance
Old Jan 21, 2013, 05:29 PM
Lantsov Alexey is offline
Find More Posts by Lantsov Alexey
Registered User
Lantsov Alexey's Avatar
CARBONIC , winner Cup of Russia
Полет Ланцова F3P-AP 20.01.2013 (2 min 11 sec)
Last edited by Lantsov Alexey; Jan 22, 2013 at 05:25 PM.
Old Jan 25, 2013, 01:24 AM
marhar is offline
Find More Posts by marhar
Mark Harrison
Quote:
Originally Posted by Lantsov Alexey View Post
CARBONIC , winner Cup of Russia
http://www.youtube.com/watch?v=7M88fthTUgA
Beautiful plane, Beautiful flying. It is like you ignore gravity!

Congratulations, well earned.
Old Feb 17, 2013, 03:51 AM
Jurgen Heilig is offline
Find More Posts by Jurgen Heilig
Registered User
Jurgen Heilig's Avatar

Carbonic at the World Championship F3P ...


WC F3P 2013 - Alexey Lantsov (3 min 7 sec)


Jrgen
Old Feb 17, 2013, 10:03 AM
**neons** is online now
Find More Posts by **neons**
5,200 Led Lighted Bike-Bob P.
**neons**'s Avatar
Hello Jurgen, Thanks for posting this video. I love your blog. Lantsov is a marvelous builder, deigner, and most of all a wonderfully advanced flyer. Congratulations Lanstov. Very well deserved.
**Neons** Bob
Old Feb 17, 2013, 01:30 PM
Lantsov Alexey is offline
Find More Posts by Lantsov Alexey
Registered User
Lantsov Alexey's Avatar
Participation in the World Cup was the best event for me.
New friends and a lot of experience, helps to move the better.
I design a new plane, and you will soon see how you can make a very light model.
Now the lightest model championship from Nicolas Pietu .
Last edited by Lantsov Alexey; Feb 17, 2013 at 01:42 PM.
Old Feb 17, 2013, 02:50 PM
nicolas pietu is offline
Find More Posts by nicolas pietu
Registered User
nicolas pietu's Avatar
Old Feb 18, 2013, 01:21 AM
marhar is offline
Find More Posts by marhar
Mark Harrison
Quote:
Originally Posted by **neons** View Post
Hello Jurgen, Thanks for posting this video. I love your blog. Lantsov is a marvelous builder, deigner, and most of all a wonderfully advanced flyer. Congratulations Lanstov. Very well deserved.
**Neons** Bob
+1
Thanks Jurgen,
Congratulations Lanstov,
Beautiful!
Old Mar 07, 2013, 03:19 PM
Lantsov Alexey is offline
Find More Posts by Lantsov Alexey
Registered User
Lantsov Alexey's Avatar
Hi friends.
As always, I made ​​a new model for the next season.
The aircraft can take off the wings.
Options.
Length 1030 mm.
Wingspan 850 mm.
Motor Lantsov coaxial.
3 servo 5035.
Controller Uge 4
ACC 120 mA
Weight ready to fly 64 grams.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log VIDEO ADDED: Pro Design F-18 Build MattinAZ Electric Ducted Fan Jet Talk 871 Jun 25, 2014 02:36 AM
Discussion EJF Composite F-86 Reco Electric Ducted Fan Jet Talk 11 Jan 08, 2010 03:23 PM
Question Composite Arf P-51 Engine ? ? ? dono Fuel Warbirds 0 Dec 04, 2009 06:36 PM
Idea Composite D Box Design j.m. Composites Fabrication 4 Sep 02, 2009 03:38 AM
Jet Design Contest entry #3 -- Messerschmitt Me P.1092/5 berniep1 Electric Ducted Fan Jet Talk 79 Nov 22, 2007 06:46 AM