New Products Flash Sale
Thread Tools
Old Dec 13, 2009, 06:41 PM
Lantsov Alexey is offline
Find More Posts by Lantsov Alexey
Registered User
Lantsov Alexey's Avatar
Discussion

Composite design F 3 P


Hello, for a long time wanted will share the manufacturing techniques ф 3 р models.
I use corbon and balsa, covering lavsan.
This model weighs 105 gramme, at the accumulator 250 ма.
Last edited by Lantsov Alexey; Dec 13, 2009 at 06:46 PM.
Sign up now
to remove ads between posts
Old Dec 15, 2009, 05:18 AM
3Don is offline
Find More Posts by 3Don
Registered User
3Don's Avatar
Aleksey real interesting construction, guys from Belarus told me about your planes. Looking forward to see it in our championship.
Old Dec 15, 2009, 05:57 AM
Mike Seale is offline
Find More Posts by Mike Seale
f5b-uk
Mike Seale's Avatar
It will be interesting to see how it compares with a depron model at the same weight? Your model might be stronger and more rigid which should make it more accurate, but the depron models can be made with more delicate curves to improve the initial design if necessary.

Mike
Old Dec 15, 2009, 02:14 PM
Lantsov Alexey is offline
Find More Posts by Lantsov Alexey
Registered User
Lantsov Alexey's Avatar
I often should change design of this model as I am constantly dissatisfied with its flight. The main thing for me - high rigidity and stability to blows, absence of ageing. I not so the good pilot and model crash happen.
For Donatаs:
I hope, soon will meet at competitions and to see your models, for me it will be the big lesson.
Last edited by Lantsov Alexey; Dec 16, 2009 at 12:17 AM.
Old Dec 28, 2009, 02:24 PM
G.P. is offline
Find More Posts by G.P.
iumop ap!sdn w,I
G.P.'s Avatar
This is an amazing plane that you have designed! After reading your posts on the Breeze thread I found this thread, and the video you posted. The piloting in the video was amazing, and I can't believe how small of a space you were flying in. You are very modest! The plane looks like it flys great, and I imagine that it would handle a crash much better than depron. It's like you've taken the I.F.O. (indoor flying object) construction methods and made a plane that looks better and flys better!

I would love to see how you built the plane. I've never done a plane like this, so things like how you join the carbon rods (thread and CA?), hinges, covering, and how you attach the servos and motor would be great to see.

Congratulations on the great job!

Cheers,
Greg
Last edited by G.P.; Dec 28, 2009 at 02:38 PM.
Old Dec 28, 2009, 05:13 PM
Lantsov Alexey is offline
Find More Posts by Lantsov Alexey
Registered User
Lantsov Alexey's Avatar
Carbon cores connect kevlar on glue СА.
Photo:
Old Dec 29, 2009, 03:41 AM
G.P. is offline
Find More Posts by G.P.
iumop ap!sdn w,I
G.P.'s Avatar
Thank you for the excellent photos. I think that I am going to have to give this type of building a try after I smash up my Breeze!
Old Dec 29, 2009, 11:54 AM
RayPB is offline
Find More Posts by RayPB
F3P and Sailplanes-Great!
RayPB's Avatar
Quote:
Originally Posted by G.P. View Post
This is an amazing plane that you have designed! After reading your posts on the Breeze thread I found this thread, and the video you posted. The piloting in the video was amazing, and I can't believe how small of a space you were flying in.

Cheers,
Greg
I'd love to see the video, but I was unable to find it. Would you mind posting a link to the video or mentioning the post number containing the video.

Thanks,

Ray
Old Dec 29, 2009, 02:24 PM
MagnusEl is offline
Find More Posts by MagnusEl
Registered User
MagnusEl's Avatar
Here is that video: https://www.rcgroups.com/forums/show...&postcount=106

I like this one better: https://www.rcgroups.com/forums/show...9&postcount=35

Amazing planes!!

Magnus
Old Dec 29, 2009, 03:27 PM
G.P. is offline
Find More Posts by G.P.
iumop ap!sdn w,I
G.P.'s Avatar
The second one is the one that I was refering to, not the one of the Breeze.
Old Dec 29, 2009, 04:30 PM
Trisquire is offline
Find More Posts by Trisquire
Intermediate Multi
Trisquire's Avatar
Quote:
Originally Posted by Lantsov Alexey View Post
Hello, for a long time wanted will share the manufacturing techniques ф 3 р models.
I use corbon and balsa, covering lavsan.
This model weighs 105 gramme, at the accumulator 250 ма.
Lantsov,

What is lavsan?

Tom
Old Dec 29, 2009, 05:40 PM
G.P. is offline
Find More Posts by G.P.
iumop ap!sdn w,I
G.P.'s Avatar
I was thinking that plastic food wrap might work for covering. That's what is used on Bill lowe's Ghost Bipe. Apparently it can be glued on with 3M spray conact cement, then even shrunk a little if you're really careful with the heat gun.
Old Dec 30, 2009, 01:47 AM
Lantsov Alexey is offline
Find More Posts by Lantsov Alexey
Registered User
Lantsov Alexey's Avatar
Lavsan this synthetic substance.
I use film lavsan 3 microns.
Old Dec 30, 2009, 08:48 AM
Trisquire is offline
Find More Posts by Trisquire
Intermediate Multi
Trisquire's Avatar
Thanks Lantsov.
Old Dec 30, 2009, 01:41 PM
bill clark is online now
Find More Posts by bill clark
WingsTiresTitsGunaGiveYaT ruble
bill clark's Avatar
lantsov, I watched second video. if you switched to 2.4ghz you would vastley increase your flying space. antenna uses a good meter. or just leave antenna down. nice work and flying, bravo


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log VIDEO ADDED: Pro Design F-18 Build MattinAZ Electric Ducted Fan Jet Talk 871 Jun 25, 2014 02:36 AM
Discussion EJF Composite F-86 Reco Electric Ducted Fan Jet Talk 11 Jan 08, 2010 03:23 PM
Question Composite Arf P-51 Engine ? ? ? dono Fuel Warbirds 0 Dec 04, 2009 06:36 PM
Idea Composite D Box Design j.m. Composites Fabrication 4 Sep 02, 2009 03:38 AM
Jet Design Contest entry #3 -- Messerschmitt Me P.1092/5 berniep1 Electric Ducted Fan Jet Talk 79 Nov 22, 2007 06:46 AM