30mm edf speed model - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by stegla, who may elect to delete unwanted replies.
Dec 12, 2009, 09:58 AM
Registered User
stegla's Avatar

30mm edf speed model

Here's a few pictures of my 'Micro-minx'.

It is powered by a Feigao 7500kV inrunner and a 3s 240mAh pack. AUW 112g.

The shroud is homemade and the rotor is a KP32 item trimmed to 30mm. The reduction in size from the 32mm of the stock KP32 is a pity but was neccessary to comply with the 30mm speed rules.

Design criteria.............
1) Thin wings.
2) Minimum frontal area.
3) Minimum intake size.
4) Weight kept to minimum.
5) No exposed linkages.
6) Gloss finish.

The model as it stands has been dopplered at 76mph.
Sign up now
to remove ads between posts
Dec 15, 2009, 10:08 PM
Need 4 Speed!
pdawg's Avatar
Its great to finally see these additional pics of your model! Sweet project!
Latest blog entry: 2017 Flying Circus

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 30mm edf flashkick Scratchbuilt Indoor and Micro Models 12 Dec 08, 2009 08:17 AM
Help! 30mm EDF ICS-50Li problems c/f GWS (Grand Wing Servo) 5 Nov 16, 2009 11:10 AM
Question micro pulse unit 30mm edf nadine Scratchbuilt Indoor and Micro Models 1 Sep 24, 2009 12:52 PM
Discussion Model - EDF Unit - Motor - ESC - Speed!! LeadSled Electric Ducted Fan Jet Talk 5 Oct 19, 2008 02:56 AM
30mm Edf Chris Nicastro GWS (Grand Wing Servo) 2 Nov 30, 2004 08:16 PM