Shop our Airplanes Products Drone Products Sales
Thread Tools
Feb 08, 2013, 12:06 PM
Bone Breaker
Lammergier's Avatar
Here is the hatch from an earlier thread.
Sign up now
to remove ads between posts
Feb 08, 2013, 12:47 PM
Registered User

Stryker


Quote:
Originally Posted by Lammergier
Here is the hatch from an earlier thread.
Many thanks for that.
Feb 09, 2013, 07:09 AM
Work....fly, repeat...
AeroRecon's Avatar
So...here I am at E-Fest.
What is YOUR ideal LS setup?
I have two new fuses (only one nose though) and want to build a couple new setups.
Figured I would ask the experts.
Thanks!!
Feb 09, 2013, 08:30 AM
Registered User
Here is my setup. 600 ma 3 cell battery, 1500kv blue wonder brushless, GWS 8x4 prop, 10 amp esc; 2 x 9 gm servos.
Make the fins and elevons out of depron. I make the elevons between 1.25-1.75 inches wide depends how responsive I want the stryker to be.
I make the hatch out of a manilla folder covered in black packing tape.
This should get you a stryker with very good vertical at around 11 ounces. Take out the fiberglass spars to drop another .6 ounce.
Feb 09, 2013, 09:32 AM
Work....fly, repeat...
AeroRecon's Avatar
Thanks! I have I one flying already but don't remember the motor kv. I will pick up those specs and give it a shot.
Feb 10, 2013, 03:13 PM
Must not buy more planes!
mclarkson's Avatar
My go to setup is:
“Blue Wonder”-style 24g 1300kV motor
10- 12 amp ESC
GWS 8040 propeller
2x 9g Servos
800-860mAh 3 cell LiPo batteries
Feb 11, 2013, 01:27 AM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
Hi guys!
I've been flying heavy Strykers for some years but have recently put together a lightweight version. I used stock airframe, hatch and elevons, but for the rest I used:

Motor: C20 1550kv: http://www.hobbyking.com/hobbyking/s...er_1550kv.html
Fins: own design. 1.5mm cardboard laminated with vinyl tape and packing tape.
Esc: A yellow, generic 30A that was originally shipped with a HK foamy
Servos: http://www.hobbyking.com/hobbyking/s...dProduct=16259
Prop: APC7x5E
Battery: 2S1300 15C: http://www.hobbyking.com/hobbyking/s...1P_15_25C.html
Rx: AR500

The mission was to build a "fly anywhere" Stryker capable of carrying a keychain camera and long flight time, and I'm quite happy with the outcome.

Stryker UltraLight Winter (4 min 14 sec)
Feb 11, 2013, 02:00 AM
I used to like trees
rchank's Avatar
Quote:
Originally Posted by Arcteryxxx
Hi guys!
I've been flying heavy Strykers for some years but have recently put together a lightweight version. I used stock airframe, hatch and elevons, but for the rest I used:

Motor: C20 1550kv: http://www.hobbyking.com/hobbyking/s...er_1550kv.html
Fins: own design. 1.5mm cardboard laminated with vinyl tape and packing tape.
Esc: A yellow, generic 30A that was originally shipped with a HK foamy
Servos: http://www.hobbyking.com/hobbyking/s...dProduct=16259
Prop: APC7x5E
Battery: 2S1300 15C: http://www.hobbyking.com/hobbyking/s...1P_15_25C.html
Rx: AR500

The mission was to build a "fly anywhere" Stryker capable of carrying a keychain camera and long flight time, and I'm quite happy with the outcome.
I've always enjoyed your great Stryker videos. Chalk up another nice one with your light Stryker.
Feb 11, 2013, 02:19 PM
Must not buy more planes!
mclarkson's Avatar
Looks great - what's your AUW?
Feb 11, 2013, 02:23 PM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
454gram. Plus 18g camera and two square cm of velcro.
Feb 17, 2013, 12:50 AM
Registered User
Introducing the X-ray lite stryker.
I wanted to try something different. I cut out as much of the body as dare. Total up weight is 8.9 Oz on 2 cell and 9.6 on 3 cell. Funny thing is it is slightly heavier from the reinforcements I had to do comparered with the base foam after you remove the spars. I thinks it looks cool and flys good.
And yes it does have a hatch set made out of clear tape.
Name: xraystryker1.jpg
Views: 116
Size: 85.7 KB
Description: Top

Name: xraystryker2.jpg
Views: 91
Size: 87.1 KB
Description: Bottom

Name: xraystryker3.jpg
Views: 107
Size: 78.9 KB
Description: Ready for launch.

Name: xraqystryker4.jpg
Views: 92
Size: 94.5 KB
Description:
Feb 17, 2013, 01:29 AM
Must not buy more planes!
mclarkson's Avatar
Put some lights in there!!!!

So you're saying we're better off, weight-wise, to leave the foam alone?
Feb 24, 2013, 01:52 PM
Registered User
Hi, i am new to stryker...I bought a radjet a while back, and love it,but this stryker seems to have exactly what i need... i am building from parts and can't find a canopy??...does Q version canopy fit the C version.?..Also which motor and prop from HK works best.?..i want to run 3s 2200mah and also be able to run 4s using this motor...i am looking for a 90-110mph on 3s...Please point me in the right direction so i can order what i need and get this show on the road thax
Feb 24, 2013, 09:59 PM
Registered User
Way to go steven tell us more!!!
Whats covering the holes? What type of glue and reinforcements did you do?
Feb 24, 2013, 10:10 PM
Registered User
Quote:
Originally Posted by hate2crash
Hi, i am new to stryker...I bought a radjet a while back, and love it,but this stryker seems to have exactly what i need... i am building from parts and can't find a canopy??...does Q version canopy fit the C version.?..Also which motor and prop from HK works best.?..i want to run 3s 2200mah and also be able to run 4s using this motor...i am looking for a 90-110mph on 3s...Please point me in the right direction so i can order what i need and get this show on the road thax
Hi!!!
For a lightweight stryker most guys ditch the stock C canopy because its too heavy.

The plane you are looking to build is much faster and heavier. But i tell you what. Check out this thread. The light strykers are a blast.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion how can you tell if you prop is cavatating? grfcon Flying Wings 3 Nov 19, 2009 12:30 AM
Discussion 2.4 How high can you go Spencer Thermal 10 Nov 05, 2009 06:47 PM
Discussion Lama 3 Flybar, How light can you go?? jamesppp Coaxial Helicopters 6 Feb 08, 2008 09:16 PM
How light can you go? Halibatsuiba Foamies (Kits) 1 Jul 17, 2004 05:37 AM