Thread Tools
Old Jan 23, 2013, 07:23 PM
birdofplay is offline
Find More Posts by birdofplay
Retired CAD guy
birdofplay's Avatar
Thanks for the input.
good to know stuff.

I flew mine form grass and NOT water so it would effect mine.

Still, I'll bet it helps a lot !

We'll want to see some vids of your flying soon :-)

Bob
Hoosier Cutout Service
Sign up now
to remove ads between posts
Old Feb 20, 2013, 12:15 PM
vleisie is offline
Find More Posts by vleisie
boerie roll
vleisie's Avatar
Hi there,

Its been months since I last posted here, but it is great to see SeaDarts still being built and flown! I've been busy with some interests other than RC for o while, but inspired by our summer holidays I've recently built two new water planes that I thought I'd share. One is a flying wing and the other a semi-scale plane based on the Mermaid light sport aircraft. Both fly nicely, but the Mermaid has only been flown off grass up to now.

All the best
Marcel
Old Feb 27, 2013, 05:01 PM
roo_ster is offline
Find More Posts by roo_ster
Standing Athwart History
roo_ster's Avatar
Has anyone used doculam covering on one of yhese? Doe sit make it too heavy for teh suggested gear?
Old Feb 27, 2013, 05:40 PM
birdofplay is offline
Find More Posts by birdofplay
Retired CAD guy
birdofplay's Avatar
you mean like this stuff ?
http://www.laminatorwarehouse.com/laminating_film.shtml

what thickness are you using ?
Old Feb 27, 2013, 05:42 PM
birdofplay is offline
Find More Posts by birdofplay
Retired CAD guy
birdofplay's Avatar
I already announced this in some of Marcel's other threads.
Marcel has given me the OK for the Mermaid KIt.

Foam only kits on 3 sheets of 6mm x 39 x 13.5 Depron.

I have placed the plywood part outlines on the foam
for use as a template.

It'll be at ...
http://www.balsabuddies.com/cutouts/Listing.htm#Mermaid

Bob
Hoosier Cutout Service
Old Feb 27, 2013, 11:15 PM
roo_ster is offline
Find More Posts by roo_ster
Standing Athwart History
roo_ster's Avatar
Quote:
Originally Posted by birdofplay View Post
you mean like this stuff ?
http://www.laminatorwarehouse.com/laminating_film.shtml

what thickness are you using ?
Yep, that sort of stuff. Heat-activated, UV-resistant.

I just have the 3 mil stuff. If I need more thickness, I give it another layer. For the Sea Dart, the only places it would get more than 3mil would be the edges of the wings and some other spots where it would overlap a bit.

Not only does it make the foamy stronger, it keeps it looking nice. If the design can handle it, I try to laminate my nicer builds.
Old Feb 28, 2013, 11:15 AM
birdofplay is offline
Find More Posts by birdofplay
Retired CAD guy
birdofplay's Avatar
Um more ???

Good luck getting that stuff to NOT have bubbles inbetween if layering.

I would think LESS is better since it isnt necessary in the 1st place. 1.7 mil

Or are you trying to avoid the CF spar ?

IN OTHER NEWS:

I just shipped the 1st MERMAID !


Bob
Hoosier Cutout Service
Old Feb 28, 2013, 06:27 PM
roo_ster is offline
Find More Posts by roo_ster
Standing Athwart History
roo_ster's Avatar
Quote:
Originally Posted by birdofplay View Post
Um more ???

Good luck getting that stuff to NOT have bubbles inbetween if layering.

I would think LESS is better since it isnt necessary in the 1st place. 1.7 mil

Or are you trying to avoid the CF spar ?

IN OTHER NEWS:

I just shipped the 1st MERMAID !


Bob
Hoosier Cutout Service
Not trying to avoid a CF spar. Just want a rigid, nice-flying plane. The layering I have done has been on leading edges and along centerlines (overlapping to get 100% coverage), and control surfaces to stiffen them up. Two layers on control surfaces make them rigid as balsa and much less sloppy under load. No great drama so far.
Old Feb 28, 2013, 07:37 PM
birdofplay is offline
Find More Posts by birdofplay
Retired CAD guy
birdofplay's Avatar
OK got it ! ;-}

Thats a good way to go.

I've been using Colored tape for similar effect.

I usually fly the stuffing out of Foamys so if they only last a season or two
I figure they gave their moneys worth.
If they die in a glorious and magnificent way ... C'est la vie !

There's always plenty of new designs to try next.
Old Feb 28, 2013, 08:07 PM
dahawk47 is online now
Find More Posts by dahawk47
Augermeister
dahawk47's Avatar
+1 on colored tape. I use the very lightweight tape from www.tapebrothers.com
Works really well.
Old Feb 28, 2013, 09:33 PM
birdofplay is offline
Find More Posts by birdofplay
Retired CAD guy
birdofplay's Avatar
CAREFULL WHATCHA BUY FROM THOSE GUYS.

Some of their tape is colored 1st surface not embedded in the adhesive on the back.
and it rubs off easily.
Old Mar 16, 2013, 05:43 PM
dahawk47 is online now
Find More Posts by dahawk47
Augermeister
dahawk47's Avatar
Bob,

Was thinking about this one as 2013 seaplane for float fly's: www.freemindmodels.com

You have to sign up for his forum for the plans but it's free to do so.

Maybe, you could do the cut outs ? Looks like an interesting and versatile twin.

-Hawk
Old Mar 16, 2013, 10:03 PM
birdofplay is offline
Find More Posts by birdofplay
Retired CAD guy
birdofplay's Avatar
INTERESTING,I'll have a look and letcha know.

You might ping him with your idea as well.

If the PDF has vector in it then I could do it relatively easily.

Bob

Edit next AM

Yet still this AM I have not received an OK to even join that forum.
It must be very special stuff !

I have received a receipt for my forum membership request but
NOT the actual OKy DOKy

So I used THAT e-mail address to write to him explaining my/our intention.

SO far nothing and I have NOT been able to access any plans on that site either.
Last edited by birdofplay; Mar 17, 2013 at 10:39 AM.
Old Mar 22, 2013, 12:19 AM
alcarafa is offline
Find More Posts by alcarafa
Registered User
I finished with my seadart construction, it end up very light and only step left now is maiden flight.

Almost all equipment used was from other planes killed in action
here is the list :
2 / 5 gr HXT servos for ailerons.
1 HXT 9 gr servo for rudder.
Orange 6ch Rx .
30 amp Mistery ESC.
HK AXN 22-08 2150 kv motor (only new equip)
APCe 6 / 4 prop.
3S - 2200 mah 25- 50 C nanotech Lipo.

Hope to post a video next weekend and check final weight.
Last edited by alcarafa; Mar 22, 2013 at 12:30 AM.
Old Apr 16, 2013, 09:01 PM
byrocat is offline
Find More Posts by byrocat
Registered User
byrocat's Avatar
birdofplay/Bob.

Just updating you -- the kit arrived and I now understand the cryptic remark about pizza boxes.

Just opened the box and checked the parts.

Going to spin off a thread in the club 's website (emfso.org) forum area with a link back here.

Will link back here as well.

Thanks for the quick ship!

Bruce


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Prop in slot Saab Draken - Plans (6mmFlyRC) vleisie Pusher Prop Jet Models 757 Jun 03, 2016 05:41 AM
Build Log Prop in slot Kfir / Mirage 6mm depron Blueangels4 Pusher Prop Jet Models 4 Oct 23, 2013 05:28 PM
Video Prop in slot noise test leadfeather Electric Plane Talk 5 Nov 07, 2008 07:41 PM
Discussion Slot design for "prop in slot" leadfeather Foamies (Scratchbuilt) 32 Oct 17, 2008 10:45 PM
Discussion Plan for "Prop in a slot" profile Epp jet model ? dekan Pusher Prop Jet Models 0 Jul 11, 2007 02:36 PM