Thread Tools
Old Feb 27, 2012, 08:01 AM
rcpilotp51 is offline
Find More Posts by rcpilotp51
Registered User
rcpilotp51's Avatar
Quote:
Originally Posted by scott page View Post
http://www.hacksmods.com/2011/11/tur...-resistor-mod/

I did this -- however I'm not skilled enough to use surface mount resistor so I used standard 1000ohm resistor. it worked like a charm. I've done 4 radios -- very easy to do .
Thank you very much for the reply! do you happen to know if this mod will interfear with my gyro x-1000 mod? Thanks again!

FPV Head Tracking Gyro X-1000 Setup with Fly Sky Th9x Turnigy 9x with Pan/Tilt - Mod - It's ALIVE! (3 min 4 sec)
Sign up now
to remove ads between posts
Old Feb 27, 2012, 08:17 AM
Keenan smith is offline
Find More Posts by Keenan smith
was geht , müssen unten kommen
Keenan smith's Avatar
whats with the combover??

good vids though
Old Feb 27, 2012, 08:35 AM
rcpilotp51 is offline
Find More Posts by rcpilotp51
Registered User
rcpilotp51's Avatar
Quote:
Originally Posted by k.smith459 View Post
whats with the combover??

good vids though
I dont understand. Combover? I'm not balding....
Old Feb 27, 2012, 08:43 AM
Keenan smith is offline
Find More Posts by Keenan smith
was geht , müssen unten kommen
Keenan smith's Avatar
its a bit like a Quiff
Old Feb 27, 2012, 09:13 AM
rcpilotp51 is offline
Find More Posts by rcpilotp51
Registered User
rcpilotp51's Avatar
Quote:
Originally Posted by k.smith459 View Post
its a bit like a Quiff
Well, I'll work on that...do you have an answer for my question?

https://www.rcgroups.com/forums/show...&postcount=151
Old Feb 27, 2012, 09:29 AM
Keenan smith is offline
Find More Posts by Keenan smith
was geht , müssen unten kommen
Keenan smith's Avatar
yes

it wont interfere
Old Feb 27, 2012, 10:13 AM
rcpilotp51 is offline
Find More Posts by rcpilotp51
Registered User
rcpilotp51's Avatar
Quote:
Originally Posted by k.smith459 View Post
yes

it wont interfere
Thank you!
Old Feb 27, 2012, 10:16 AM
Keenan smith is offline
Find More Posts by Keenan smith
was geht , müssen unten kommen
Keenan smith's Avatar
your welcome and please check out my An-225 thread
https://www.rcgroups.com/forums/show....php?t=1600691
Old Feb 27, 2012, 10:53 AM
rcpilotp51 is offline
Find More Posts by rcpilotp51
Registered User
rcpilotp51's Avatar
Quote:
Originally Posted by k.smith459 View Post
your welcome and please check out my An-225 thread
https://www.rcgroups.com/forums/show....php?t=1600691
will do, thanks
Old Mar 21, 2012, 10:34 AM
andernamen is offline
Find More Posts by andernamen
Registered User
andernamen's Avatar
I am new to this radio but have done some reading and it looks like if I flash my radio (when it finally arrives!) it should be great. I know there is a programming board from smartieparts that stays in the radio, but isn't there another way to flash the programming? I saw someone else had a board that is removable that does the same thing. Can someone point me in this direction. Thanks.
Old Mar 21, 2012, 11:21 AM
scott page is offline
Find More Posts by scott page
Registered User
scott page's Avatar
Quote:
Originally Posted by andernamen View Post
I am new to this radio but have done some reading and it looks like if I flash my radio (when it finally arrives!) it should be great. I know there is a programming board from smartieparts that stays in the radio, but isn't there another way to flash the programming? I saw someone else had a board that is removable that does the same thing. Can someone point me in this direction. Thanks.
In truth, you don't want a removable programmer. The ability to connect the TX to the computer via the USB cable is the greatest strength of this system. If you have not played with EEPE or companion9x yet -- download them and get used to them. These are the programs that you use to interface with the transmitter. At first it's a foreign world -- but after you get comfortable with them -- you will have an amazing amount of control of the functionality of the transmitter.

There are other options for programmers -- but they require soldering to the PCB in the transmitter. These may interface with an external component that plugs in to a custom port you install -- but are not truly removable.
RCG Plus Member
Latest blog entry: Old OpenTX and Taranis Videos
Old Apr 27, 2012, 06:23 PM
flashbang is offline
Find More Posts by flashbang
Registered User
flashbang's Avatar
Quote:
Originally Posted by scott page View Post
In truth, you don't want a removable programmer. The ability to connect the TX to the computer via the USB cable is the greatest strength of this system. If you have not played with EEPE or companion9x yet -- download them and get used to them. These are the programs that you use to interface with the transmitter. At first it's a foreign world -- but after you get comfortable with them -- you will have an amazing amount of control of the functionality of the transmitter.

There are other options for programmers -- but they require soldering to the PCB in the transmitter. These may interface with an external component that plugs in to a custom port you install -- but are not truly removable.
Without a doubt, Smartieparts is the way to go. Expensive but convenient.
Old May 01, 2012, 02:31 PM
topflight-rcu is offline
Find More Posts by topflight-rcu
Registered User
topflight-rcu's Avatar
With the Smartieparts board installed, has anyone come up with a GUI software for connection to the ER9x that gives you ability to make changes and save settings on a PC? Something like a Visual Basic or C++ software, or is there no specific language. I think JR has software to connect your TX to.

Thanks
Joe
Last edited by topflight-rcu; May 01, 2012 at 02:52 PM.
Old May 01, 2012, 02:42 PM
Keenan smith is offline
Find More Posts by Keenan smith
was geht , müssen unten kommen
Keenan smith's Avatar
Any one Caught wind of the new 9X the 9XR (being Produced in house by Hobbyking and Frsky Though its not out yet )
Old May 01, 2012, 06:16 PM
Galand is offline
Find More Posts by Galand
Registered User
Galand's Avatar
Quote:
Originally Posted by topflight-rcu View Post
With the Smartieparts board installed, has anyone come up with a GUI software for connection to the ER9x that gives you ability to make changes and save settings on a PC? Something like a Visual Basic or C++ software, or is there no specific language. I think JR has software to connect your TX to.

Thanks
Joe
Look for eePe on the forums.
Edit:
read this forum:
http://9xforums.com/forum/index.php?...7257f8d72b3997
Last edited by Galand; May 01, 2012 at 06:21 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale JR XP6102, Turnigy 9x, Assan X8J heffe2001 Aircraft - General - Radio Equipment (FS/W) 10 Sep 21, 2009 03:50 PM
Discussion Anyone have a bad Turnigy Imax or Eurgle 9x Kev Radios 0 Sep 18, 2009 06:47 PM
Question iMax 9X generally and 2.4ghz for the iMax 9X specifically: How is it? JRexA Radios 30 May 11, 2009 05:25 PM
Discussion iMAX 9X transmitter Crow Program - how to use it??? John Kim Radios 1 Nov 22, 2008 12:00 PM