New Products Flash Sale
Thread Tools
Old Sep 27, 2010, 02:47 PM
openuas is offline
Find More Posts by openuas
OpenUAS
openuas's Avatar
* 100mW for indoor use.
* For outdoor use, 100mW in the lower part of the band, but 10mW limit in the upper part (2454 to 2483.5 MHz)

The 10mW limit will disappear in 2012 once defense stops using it.

And hopefully also more 35mhz channels in the near future.
Sign up now
to remove ads between posts
Old Sep 28, 2010, 03:08 AM
Jurgen Heilig is offline
Find More Posts by Jurgen Heilig
Registered User
Jurgen Heilig's Avatar
Quote:
Originally Posted by openuas View Post
* 100mW for indoor use.
* For outdoor use, 100mW in the lower part of the band, but 10mW limit in the upper part (2454 to 2483.5 MHz) ...
And hopefully also more 35mhz channels in the near future.
Having a transmitter change the output power from 100mW to 10mW makes no real sense, that's why the upper band is usually not used at all by FHSS systems.

I doubt that there is still much demand for more 35MHz channels.

Jürgen
Old Sep 28, 2010, 05:28 AM
flyingrally is offline
Find More Posts by flyingrally
Where did Steve go ?
Back to the xeno discussion.

I finally got my metal shaft replacement... woohoo.

New version are being sold with the metal shaft.

interestingly the part numbers for a replacment shaft carbon or steel are not different. Why is this scary ? because here in Australia unless you ask for it you will be given a carbon replacment... I guess they had to dump them somewhere
Old Oct 04, 2010, 04:34 AM
hobidude is offline
Find More Posts by hobidude
can't wait to retire..
hobidude's Avatar
that answers my question thanks.
just got the power set and it came with steel shaft.
Reveiw I read said carbon...without going through the whole thread I'm guessing there has been an issue?

I want to buy a spare wing kit and turn it into a 70" version.
Big fold up wing that lives in the boot
Old Oct 04, 2010, 04:59 AM
fpvnick is offline
Find More Posts by fpvnick
My other vehicle is unmanned
fpvnick's Avatar
I’m just building one of these http://robotbirds.com/catalog/produc...oducts_id=1311 at the moment 70" wing and it separates into 2 half’s could be worth a look.
Old Oct 04, 2010, 06:24 AM
hobidude is offline
Find More Posts by hobidude
can't wait to retire..
hobidude's Avatar
yeh, guess I just want to try something different.

these are pretty cool
http://www.windrider.com.hk/products...-box_label.jpg
Old Oct 04, 2010, 09:16 AM
fpvnick is offline
Find More Posts by fpvnick
My other vehicle is unmanned
fpvnick's Avatar
I had a look at that one to but decided it was just to huge lol the 70” wing won’t fit on my build desk in one part.
Old Oct 28, 2010, 01:14 PM
Driver330 is offline
Find More Posts by Driver330
Registered User

63 pages...


...quite easy to miss a piece of information...

I bought the kit several months ago and did not get around building until yesterday.

The pushrods are 1.3 mm and the holes in the control horns 2.5 mm. What the hell is that? Am I missing something here?

Thank you kindly.

BoKo
Old Oct 28, 2010, 02:26 PM
hobie14 is online now
Find More Posts by hobie14
Registered User
hobie14's Avatar
Quote:
Originally Posted by Driver330 View Post
...quite easy to miss a piece of information...

I bought the kit several months ago and did not get around building until yesterday.

The pushrods are 1.3 mm and the holes in the control horns 2.5 mm. What the hell is that? Am I missing something here?

Thank you kindly.

BoKo
You should have a couple of linkage stoppers ..... use at the horn end and a z bend at the servo end ....... something like this ....

Old Oct 28, 2010, 05:43 PM
Driver330 is offline
Find More Posts by Driver330
Registered User
Quote:
Originally Posted by hobie14 View Post
You should have a couple of linkage stoppers ..... use at the horn end and a z bend at the servo end ....... something like this ....

After posting my question, I went back to the manual an realized that I asked a stupid question. Funny thing is all my airplanes uses this type of connections, but none are mounted at the control horn - all on the servo horn.

Thanks anyway.

Boko
Old Oct 29, 2010, 12:38 PM
Lazy is offline
Find More Posts by Lazy
Crash master...
Lazy's Avatar
My Xeno:


Old Oct 29, 2010, 02:21 PM
hobie14 is online now
Find More Posts by hobie14
Registered User
hobie14's Avatar
[QUOTE=Lazy;16414322]My Xeno:

Nice paint job ..... good orientation .....

..... and servos on top ..... why didn't MPX do that ....
Old Oct 29, 2010, 02:32 PM
Lazy is offline
Find More Posts by Lazy
Crash master...
Lazy's Avatar
Servos on bottom
Old Oct 30, 2010, 03:26 AM
hobie14 is online now
Find More Posts by hobie14
Registered User
hobie14's Avatar
Quote:
Originally Posted by Lazy View Post
Servos on bottom
Ok .... Ok .... and Controls horns on top .....

that's the bit that can dig holes in the runway etc etc when mounted below .....

I fitted my own Servos and horns on top and they work like a dream ....
Old Nov 09, 2010, 05:15 AM
Melly1971 is offline
Find More Posts by Melly1971
Registered User
Soaring Xeno... HS-81x2 (horns on top), Jeti Duplex R4, 4xAAA NiMH.

Design by my doughter (6 years).


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Multiplex Xeno checkup Flying Wings 129 Apr 10, 2010 09:47 AM
Yippee! New Multiplex Models 2009: MERLIN and XENO Doubletap Slope 12 Feb 26, 2010 11:31 PM
Discussion XENO, New to Multiplex??? sparkie624 Hitec/Multiplex USA 4 May 27, 2009 07:16 PM
Discussion Multiplex Xeno as FPV JakAck FPV Talk 7 Mar 09, 2009 07:40 PM
New Product Multiplex Xeno soundcheque Flying Wings 2 Mar 03, 2009 10:25 PM