FS- Lots of New stuff! Tx systems, Rx's, E-tech's, Kokams, and more - RC Groups
Thread Tools
This thread is privately moderated by Etonic, who may elect to delete unwanted replies.
May 04, 2003, 07:30 AM
Trader Rating: 148
Registered User

FS- Lots of New stuff! Tx systems, Rx's, E-tech's, Kokams, and more


Hi Guys,


Here is some more items. All are NEW unless noted. The Tx packages were bought to set up 2 people locally, but they backed out.


1- Hitec Neon SS Tx, nicads, and charger- With 4ch GWS Rx, 2 NARO servos, GS-100 5amp esc w/brake, 7.2V Nimh 600mah battery - $100 Shipped

1- Hitec Neon SS Tx, nicads, and charger- With 4ch GWS Rx, 2 PICO servos, IC-50 2amp esc, 7.2V Nimh 270mah battery - $100 Shipped

1- Hitec LASER 4 Tx, Charger, and Nicads- with GWS RN-6 Rx- $80 shipped. (very slightly used)

1- Hitec ELECTRON 6 Rx - $55 shipped (I have xtal ch 19 or 27)

1- E-tech 1200 2s1p pack w/ micro deans and AC 2-cell charger $40 shipped SOLD

2- Kokam 1020 2s1p packs w/micro deans and AC 2-cell Charger $50 shipped

1- Curtek system with 7 LED's- these are the 8000mcd LED's I am selling plugged into the curtek board. $40 shipped.

I will get some pics later today! I will start putting some of this on Ebay soon...I just don't want it sitting too long!

I will take MO or Paypal.

PM or Email: etonic@cox.net

Thanks,
Mark
Last edited by Etonic; May 04, 2003 at 08:58 PM.
Sign up now
to remove ads between posts
May 04, 2003, 12:40 PM
Trader Rating: 5
Registered User
Will the Kokams run a Slow Stick stock power train, and also an S400 DD or geared? Thanks for any info! Glen
May 04, 2003, 01:12 PM
Trader Rating: 148
Registered User
Glen,

The Kokams will handle 4-5A continuous. To fly the slowstick you need 6Amps. You would need to hook up BOTH Kokam packs with a Y-connector to make a 2s2p pack -I do this in the Crazy Max.

A SINGLE e-tec 1200 pack would fly the Slowstick. It can handle 7.5Amps continuous. It can also fly in most EPS300 applications. 2 packs in parallel (2s2p) could handle 15AMPS! Thats enough for speed 400.

I have 2 e-tec 1200 packs I can sell.

Hope this helps!
-Mark
May 04, 2003, 01:41 PM
Trader Rating: 103
Registered User
How much current will the E tech pack take?
May 04, 2003, 02:49 PM
Trader Rating: 102
Rhinebeck CD-99,00,01,02
Tom Smith's Avatar

Mark


Sent you an e mail. Tom
May 04, 2003, 06:28 PM
Trader Rating: 148
Registered User
Here's the Neon with Pico flight pack...
May 04, 2003, 06:29 PM
Trader Rating: 148
Registered User
Here's the Neon with naro flight pack...
May 04, 2003, 06:30 PM
Trader Rating: 148
Registered User
Here's the Lithium Poly pack- both types are almost identical...
May 04, 2003, 06:31 PM
Trader Rating: 5
Mechanical Eng. Student
hoverkid87's Avatar
How do your lights differ from the Curtek ones?

Are the wires long enough to fit on a SS?

Thanks
Addison
May 04, 2003, 06:45 PM
Trader Rating: 148
Registered User
Addison,

Here's a pic...its Mathew's board and connectors, just used my own 8000mcd leds. Wire length should be OK..was wired for a Beaver.
May 04, 2003, 07:19 PM
Trader Rating: 5
Registered User
Philipp's Avatar
Sent PM for Electron 6
May 04, 2003, 11:35 PM
Trader Rating: 5
Registered User
Sorry to be so dense on all this, but what would it cost me to get set up to power the SS with the E-Tec packs and charger, and further, what would it be to use this type pack in my Sky Scooter? Did I read correctly that in some of the offers in your post an AC charger was included? Thanks again! Glen

Thread Tools