Thread Tools
Nov 22, 2009, 08:40 AM
Registered User
Discussion

is there much difference between an octura y 535 and an x 535 propeller ?


iwhat is ther difference, is ther much ?
Sign up now
to remove ads between posts
Nov 22, 2009, 09:33 AM
WooHoo!
woodybob's Avatar
No X535 listed.
http://www.aerorig.com.br/Octura%20Prop%20Chart.htm
Nov 22, 2009, 11:25 AM
Registered User
sorry

i meant

y531 and x431

ia there much difference between the 2 ?
Nov 22, 2009, 11:31 AM
Grumpa Tom
Kmot's Avatar
Yes. The first number is the pitch. So one is 1.5 times and the other is 1.4 times the diameter to calculate the pitch.
Nov 22, 2009, 12:07 PM
rikyrik2112's Avatar
Just add a #1 instead of letter then decimal pointpitch then diameter.....also means low lift series off prop's...the hull is where the lift is for these batch of prop's
Nov 22, 2009, 02:11 PM
Registered User
how do i know if i need a lifting prop ?
Nov 22, 2009, 02:52 PM
Registered User
lifter props are for 'riggers and other hydros, mono hulls & cats don't generally benefit much from 'lifter' props. all other factors being equal...a 531 should provide a modest speed increase.
Nov 22, 2009, 02:55 PM
Registered User
"X" Denotes that it is a lifter prop and the "Y" is not a lifter prop. I run a Y535 and Y536 on my 1/12 Miss Elam Nitro w/ .18 engine running on 50% nitro. She loves those props!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question is there an on board starting system like the ez start for the hpi savage x finnrambo Nitro and Glow Power Cars 7 Nov 02, 2009 08:41 PM
Question What's the difference between trailing edge and aileron stock? flatland2d The Builders Workshop 5 Oct 05, 2009 08:52 PM
Discussion How much of a difference is there really between .40 and .46 size? planebldr Engines 21 Sep 02, 2009 11:58 PM
Is there much difference between 12G & 14G Wire. world_hobby Batteries and Chargers 19 Dec 16, 2005 02:16 PM
Can someone explain the difference between all the Aveox 27/x/x numbers? down_shift Power Systems 8 Apr 29, 2003 09:34 AM