:O, i'm in love, i really have to order my Depron! I will be using an AP05 on a 2s, as long as the AUW is 70g or below, i will have a 3d model

Originally Posted by Bowerz

:O, i'm in love, i really have to order my Depron! I will be using an AP05 on a 2s, as long as the AUW is 70g or below, i will have a 3d model

The micro avion i had flew fairly well... the 15" wingspan @ 31g RTF weight w/ 49 sq.in of wing area, it was very snappy at low speeds (this eventually caused the demise of the first one). I think if the models wing chord was enlarged 1/4 to 1/2" at both the root and tip and extended 1 1/2" it would fly much better.

My bipe currently is sitting at 43g w/ everything but the 2 aileron servo's, lipo, esc and motor. I believe its final weight should be about 80-83grams.
its wing loading will be less than .4oz per sq. inch..

I've got micro Avion #2 on the board now, which will use an AR6400L and 2 AS2000L's with SFG's and 1 1/2" more wingspan. I'll let ya know how that one flies. The owner of this one, doesn't want to go brushless so i've got to get it as light as possible for the stock sukhoi power system.

Did you get the plans for the Avion off of me? I love how everybody can get my plane flying bar me! I think it would have gone if i used the right battery though. Or could have used my P-51 guts if i had 2/3mm foam.

Originally Posted by Bowerz

Did you get the plans for the Avion off of me? I love how everybody can get my plane flying bar me! I think it would have gone if i used the right battery though. Or could have used my P-51 guts if i had 2/3mm foam.

yea i got em off here, didn't know you were the originator of them..im working on the 2nd one right now. They both use 3mm depron for everything, except the aft fuselage spline which is 2mm.

My bipe is all 2mm depron and w/ the carbon bracing, is very stiff. I believe the avion made from 1 or 2mm depron w/ some carbon rod of plate spars, it could come out under 30g RTF.

Very nice, look forward to seeing it. And yes, i am the originator of the Micro Avion plans, there appears to be some larger sized ones floating around here as well.

Here is an odd one for you. AUW is 27g with the UM Su-26 motor and a 4.4x4 prop it almost hovers. I use a 150mah battery.

Can I have plans for the bipe invertmast? PLEASE! NOW!

Originally Posted by dylantorquerol

Can I have plans for the bipe invertmast? PLEASE! NOW!

patience really isn't your strong suit is it? lol.

Its called the "6th version 4" The plans are already posted on RcG.

Its a tight fit but the 6400 is there

Meshuggah, every time i see this, i almost break down into a fit of unworthyness, often accompanied by a big feeling of I WANT THAT NOW AND ILL KILL TO GET IT

Got my batts, esc and motor in today.. all i'm lacking is 1 linear servo for the ailerons and my bipe will be done.. what i'm having a hard time deciding, is running 2 linear servos @ 3grams (85g RTF weight) or 1 6.6g servo (38g RTF weight)...

Originally Posted by invertmast

Got my batts, esc and motor in today.. all i'm lacking is 1 linear servo for the ailerons and my bipe will be done.. what i'm having a hard time deciding, is running 2 linear servos @ 3grams (85g RTF weight) or 1 6.6g servo (38g RTF weight)...

Do you need the torque of the 6.6?

Originally Posted by Meshuggah

Do you need the torque of the 6.6?

i've got 4 big ole ailerons and 2 "hover" flaps to go with it.. so the extra torque wouldn't hurt.

I would just go with the 6.6g servo. I had power problems with my 1.7g AS2000L with my ailerons. BTW, WHERE ARE THE PLANS FOR THE 6TH VER.4 BIPE? Can I have a link please? I can't find them.

Originally Posted by invertmast

i've got 4 big ole ailerons and 2 "hover" flaps to go with it.. so the extra torque wouldn't hurt.

Yeah you need the torque there. Its no problem if you fly snail-slow but iy you have more speed you will fly the servo