Originally Posted by Bowerz
:O, i'm in love, i really have to order my Depron! I will be using an AP05 on a 2s, as long as the AUW is 70g or below, i will have a 3d model
The micro avion i had flew fairly well... the 15" wingspan @ 31g RTF weight w/ 49 sq.in of wing area, it was very snappy at low speeds (this eventually caused the demise of the first one). I think if the models wing chord was enlarged 1/4 to 1/2" at both the root and tip and extended 1 1/2" it would fly much better.
My bipe currently is sitting at 43g w/ everything but the 2 aileron servo's, lipo, esc and motor. I believe its final weight should be about 80-83grams.
its wing loading will be less than .4oz per sq. inch..
I've got micro Avion #2 on the board now, which will use an AR6400L and 2 AS2000L's with SFG's and 1 1/2" more wingspan. I'll let ya know how that one flies. The owner of this one, doesn't want to go brushless so i've got to get it as light as possible for the stock sukhoi power system.