Need Airframe for my Rclander 68mm 3s EDF unit - RC Groups
Thread Tools
Nov 18, 2009, 04:47 PM
Registered User
JohnAsaPrice's Avatar

Need Airframe for my Rclander 68mm 3s EDF unit

Hey guys, I'm retiring my GWS A-4 and have a good RCLander 3s EDF unit that I would like to put in a new, light, airframe.

Any suggestions for a good airframe for this 68mm EDF unit?

I currently fly with a 2X 3S 2200 mah battery configuration (4400 mah)


Sign up now
to remove ads between posts
Nov 18, 2009, 09:58 PM
Team White Llama!
gundamnitpete's Avatar
Hp f-16?
Nov 19, 2009, 06:47 AM
Registered User
JohnAsaPrice's Avatar
Is that the Phase 3 F-16?
Nov 19, 2009, 06:53 AM
Team White Llama!
gundamnitpete's Avatar
Yes, i think it would work quite well (only the 4400 might be a little heavy)
Nov 19, 2009, 08:54 AM
Registered User
perttime's Avatar
Do you want to build or buy?

Here's a pretty cool one (with or without the thrust vectoring).
The "MiniFan" size one should be good for your fan.
Just have to cut and glue some 6 mm foam...
Nov 20, 2009, 02:45 PM
Registered User
JohnAsaPrice's Avatar
I'm not interested in doing the airframe from scratch (yet) so, Phase 3 f-16 sounds promising.

I have the RCLander 68mm 3S fan
(which is a little on the heavy side)

this fan wants to draw heavy wattage, so I prefer to run with a 4400 mah setup

Has anyone tried this config before?

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion What airframe/kit can I use the Lander 3S 4375KV EDF with and still fly fast? fooyukvoon Foamy EDFs 14 Oct 03, 2009 12:41 PM
Discussion RCLander 3s EDF Unit questions JohnAsaPrice Vendor Talk 1 Aug 10, 2009 10:27 PM
Sold RCLander 70mm 68mm - Aluminium EDF + 2185 kv motor (6S LiPo) SkylineFlyer Aircraft - Electric - Jets (FS/W) 6 Jun 16, 2009 09:21 AM
Sold SOLD - HC EDF Unit 2.68inch / 68mm - SOLD henkvdw Aircraft - Electric - Jets (FS/W) 1 Jun 01, 2009 06:23 PM
Sold RCLander 68mm Aluminium fan unit NEW Jet Dreams Aircraft - Electric - Jets (FS/W) 5 Apr 21, 2009 03:00 PM