Thread Tools
Dec 10, 2012, 08:23 PM
Chilled and served
Henry.'s Avatar
Just so i donīt make a mess the first time i fly; if i push the direction stick full in any direction will the quad then continually spin around that axis or will it stop at a certain degree or so and not spin and just going forward?

Im so dam scared that it will spin around its axis and crash so i havenīt dare tried it out yet.
Sign up now
to remove ads between posts
Dec 11, 2012, 01:27 AM
AVR Dude
It will continue to spin on its axis.
Dec 11, 2012, 03:10 AM
Chilled and served
Henry.'s Avatar
I just remember that i have read somewhere that it in some mode would it stop at 45 degree or so to prevnet this for beginners or so or i might have mixed this up with something else?
Dec 11, 2012, 04:13 AM
Registered User
The normal KK doesn't have ACC, so it doesn't know it's angle, it will continue to spin, ACRO mode

Dion
Dec 11, 2012, 02:56 PM
Chilled and served
Henry.'s Avatar
Ah that was sad. I thought it could be calculated from the gyros, but ok.
Dec 13, 2012, 06:59 PM
Registered User
Hi, I have a problem with my KK board, I can't reverse my yaw gyro. After put the roll pot to zero position I turn on the board but the led doesn't blink for 3 times. Does anyone face this same problem?

Thank you
Dec 14, 2012, 03:04 AM
Registered User
Quote:
Originally Posted by anlpereira View Post
Hi, I have a problem with my KK board, I can't reverse my yaw gyro. After put the roll pot to zero position I turn on the board but the led doesn't blink for 3 times. Does anyone face this same problem?

Thank you
Try the other way.
Dec 16, 2012, 09:02 PM
MINE!
Mick Molloy's Avatar
I am having issues registering on the kk website.. tried 3 different browsers, 3 different computers, 2 different connections and OS.. same issue, after clciking register I just ge ta blank screen.

Tried sending a message via contact tab and got same issue..
Last edited by Mick Molloy; Dec 16, 2012 at 09:08 PM.
Dec 23, 2012, 06:58 PM
Grounded Pilot
IIIBonesAirForce's Avatar

Aluminum Frame for KK FC


check out my 41" frame. In the process of building my second one with 1"X1" aluminum frame. Frame weight is 18 Oz, The first one has KK 1.2 flies great and on the large 41" aluminum frame I am going with RC Timers 650 KV motors. It is a work in progress.
Last edited by IIIBonesAirForce; Dec 25, 2012 at 06:30 PM.
Jan 18, 2013, 11:27 AM
Sr. Ext. UAS Pilot, NMSU FTC
UAVJOE's Avatar
When I try to arm my KK board the blue LED lights up and then just beeps slowly and I never get motor control. What is the issue?
Jan 24, 2013, 10:33 AM
Registered User
try arming from the other direction -- i think mine arms with left rudder but if you reverse the rudder it arms from the right ??At any rate, on one direction the board disarms, in the other the board arms.
Jan 25, 2013, 02:42 PM
Registered User

am lost


hello.. i have the KK Compatible Multi-Rotor Control Board (Blue Ver. 2.5 Firmware)

http://www.valuehobby.com/multicopte...rol-board.html

Support standard KK firmware (With Atmel 168 MCU)
Latest KK firmware pre-installed: Version 2.5 (Blue Board)
Three pre-installed configurations available: Quadcopter, Xcopter, Tricopter

i got this board as it stated it did single .. wanted to try gettin it on my heli for the fun of trying..
issue is iam unable to get the software AVRstudio and the http://lazyzero.de/kkflashtool software...

any good manual for this ? or step or setup site ?? i get errors of fuse and unable to contect to the board..

any help would be awsome thank you
Jan 26, 2013, 04:09 AM
Registered User
will one less person goin to quads .. seems no company will support there hardware and none out there welling to help with this .. seems if i was goin to run quad probley ..

o will
Feb 01, 2013, 07:21 AM
Registered User
I'm missing what you are trying here?
Feb 11, 2013, 11:31 PM
Chilled and served
Henry.'s Avatar
The 168 needs a refrence voltage for the gyros according to the schematic, what would be the optimum voltage? I think itīs under 2V but i have understood it need to be quite exact.

Anyone knows?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Quadrotor brushless controller airbotix Multirotor Drone Talk 63 Aug 06, 2010 11:15 AM
Discussion ALPO -Aerobatic Low Parts count Original design. Brian Courtice Foamies (Scratchbuilt) 8 Sep 21, 2009 03:57 AM
Discussion Any tips for my first flight with a low wing plane? Warthog_Fan Fuel Plane Talk 4 Sep 06, 2009 07:53 AM
Help! Need help with Low-cost QuadRotor Hero.sl Coaxial Helicopters 5 Jun 28, 2009 02:26 AM
Question Searching Simple Controller for Free Flight flymax Power Systems 8 Jan 07, 2006 10:07 AM