excuse my ignorance ....
I have an older card KK with an Arduino 88P.
Can I replace the 88P with an Arduino 168????
Thank you for your attention
greetings

Umberto

Hi Umberto,

yes of cause you can. They are pin-compatible. The only difference is the flash size.
But I think you mean ATmega168, that is the µController. Arduino is a ATmega168/328 with a bootloader and a simplified programming language.

Christian

Thank's for your answer.
So i simply replace the atmega and upload , with your product, the new firmware....
Good.
run to find and buy an atmega168.....
bye
Umberto

Originally Posted by LazyZero

Hi

Umberto

yes of cause you can. They are pin-compatible. The only difference is the flash size.
But I think you mean ATmega168, that is the µController. Arduino is a ATmega168/328 with a bootloader and a simplified programming language.

Christian

Arghh...
i cannot find an atm168..... Sparkfun , roboitaly.etc.
only 328 with Arduino 2009 Bootloader
can i use it???

thank you

Originally Posted by colpiumb

Thank's for your answer.
So i simply replace the atmega and upload , with your product, the new firmware....
Good.
run to find and buy an atmega168.....
bye
Umberto

Yes, you can but have you checked ebay.it?

yes i try in ebay.it ...i find some german ebayer...
but i must to buy other items in roboitaly so if i can use the atmel328....is better and cheap..
or no????

Originally Posted by LazyZero

Yes, you can but have you checked ebay.it?

Yes, you can also use the 328. It is the same expect more flash memory.

Christian

Oh...yes ok

ORDERED

BYE BYE

Originally Posted by LazyZero

Yes, you can also use the 328. It is the same expect more flash memory.

Christian

Originally Posted by colpiumb

Oh...yes ok

ORDERED

BYE BYE

Colpiumb if you have trouble changing your chip maybe i can help you since i am close to your location.I have everything you need to change it and to program it.Send PM if interested.

Hi all,

I just uploaded the next version of KKmulticopter Flash Tool. New this time:

• advanced settings for some progger settings. Baud rate for STK500, STK500v2 to use arduinoISP correctly?
• KK Plus V5.5d board is added to the featured board
• Spanish translation added. Thanks to Ernesto.
• Russian translation added. Thanks to Artur.
• Portuguese translation added. Thanks to Jose.
• Info button added. You can now open an information page to all firmwares that have one.

Much thanks once again to all the people helping me with the translation.

Visit KKmulticopter Flash Tool webpage to get the latest version.

Best Christian

Changing the faulty enclosed new leads enabled successful first hover of 'x' configuration quad.

what is the difference between enc-03rc and enc-03ma and enc-03mb

which one is suitable for kk multicopter ? please advice

it s the same thing
just frequency is not the same

Hi all,

please update to 0.32. Version 0.31 had a bug that prevented flashing the controller. I am very sorry about that.

Visit KKmulticopter Flash Tool webpage to get the latest version.

Best Christian

Originally Posted by mk1spitfire

Changing the faulty enclosed new leads enabled successful first hover of 'x' configuration quad.

Sweet! Very happy to hear you got it all sorted out. Congratulations.

Rob...