Build A Tricopter - Page 507 - RC Groups
Thread Tools
Jun 20, 2010, 06:46 AM
Registered User
Upup's Avatar
SKYCAM4

What have you made your UC from any chance of some details??

regards Jeff
Sign up now
to remove ads between posts
Jun 20, 2010, 07:02 AM
Registered User
Quote:
Originally Posted by Upup
picture not available to me?
Most of his pictures are not available to my too. I thought it was just me since I saw this problem since a while back and nobody commented.

Yoram
Jun 20, 2010, 09:04 AM
Registered User
Quote:
Originally Posted by TigerPilot
Most of his pictures are not available to my too. I thought it was just me since I saw this problem since a while back and nobody commented.

Yoram
This has been happening to me for a while I post a pic and the next day its not available, I think its the site I use to upload pics to, maybe something to do wid copywright or something, i'll upload them again and I'll look for another site to store my pics on. sorry for any inconveinance caused.
cheers vroooOOOM.
Last edited by vroooOOOM; Jun 20, 2010 at 02:35 PM.
Jun 20, 2010, 11:27 AM
Registered User
Upup's Avatar
Quote:
Originally Posted by vroooOOOM
This has been happening to me for a while I post a pic and the next day its not available, I think its the site I use to upload pics to, maybe something to do wid copywright or something, i'll upload them again and I'll look for another site to store my pics on. sorry for any inconveinance caused.
cheers vroooOOOM.
There is no need to go to a different site to up load pics scroll to the bottom of this page click on "go advanced" then scroll to bottom again click "manage attachments" that takes you to another screen with dialog boxes click on browze "browze" your PC to the pics click "open" that takes you back to rcg click " upload" scroll down "save changes" "close window"

Done

Regards Jeff
Last edited by Upup; Jun 20, 2010 at 11:33 AM.
Jun 20, 2010, 02:03 PM
Registered User
Quote:
Originally Posted by Upup
There is no need to go to a different site to up load pics scroll to the bottom of this page click on "go advanced" then scroll to bottom again click "manage attachments" that takes you to another screen with dialog boxes click on browze "browze" your PC to the pics click "open" that takes you back to rcg click " upload" scroll down "save changes" "close window"

Done

Regards Jeff
Jeff, what can I say, other than thanks again I thought there had to be an easier way, I just never stopped to look, cheers vroooOOOM.
Last edited by vroooOOOM; Jun 20, 2010 at 02:35 PM.
Jun 20, 2010, 02:14 PM
Registered User
Final set up of Gyro's & Bec/monitor, I've kept the BEC away from the gyro's don't want any interference (EMF) and the lypo monitor is piggy back on the BEC.
Jun 20, 2010, 02:19 PM
Registered User
Anyone using a Futaba 6EX 2.4Ghz Transmitter?
I'd appreciate some info on set up for my Tricop if anyone can help.

Thanks in anticipation.
Jun 20, 2010, 08:03 PM
Nothing but high quality
Dadude's Avatar
Long story short, my friend told me to do a trick, and it was too tempting.

Tricopter Loop + Funny Crash (0 min 40 sec)


It's repaired and flying awesome.

,Jon
Jun 20, 2010, 10:21 PM
KC9TPL- Get Legit
BloomingtonFPV's Avatar
Quote:
Originally Posted by Dadude
Long story short, my friend told me to do a trick, and it was too tempting.

It's repaired and flying awesome.

,Jon
When these things go bad, they go bad fast. But sooo fun to fly...
Jun 21, 2010, 10:27 AM
Drone operator & Photographer
So this is how it goes when using a prop with an off center hole...

Tricopter arm vibration (1 min 38 sec)


Tricopter with off center propeller (0 min 41 sec)


Getting a new one today..
Jun 21, 2010, 12:37 PM
Design and fly
skycam4's Avatar
Short video before another storm. Wind is 5-10

http://www.youtube.com/watch?v=thnKNbDHEoc
Jun 21, 2010, 12:44 PM
Drone operator & Photographer
Quote:
Originally Posted by skycam4
Wind is 5-10
mph or m/s ?
Jun 21, 2010, 01:09 PM
Design and fly
skycam4's Avatar
5-10mph. Is was right before a large storm was blowing in. 67% humidity 70 dew point 85 degree Temperature. Very unstable air mass. The Tri doesn't mind the wind but for some reason the humidity will affect it some.
Jun 21, 2010, 05:38 PM
Registered User
Anyone tried 3 blade props???
Jun 21, 2010, 09:19 PM
CASA Certified RPAS Instructor
The_Mongrel's Avatar
Quote:
Originally Posted by wizprod
So this is how it goes when using a prop with an off center hole...

http://www.youtube.com/watch?v=2a9qwkyV9BU

http://www.youtube.com/watch?v=8j6zDZmevdA

Getting a new one today..


YEP!! That is all it takes to unsettle the gyros!!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Yet another tricopter build. !!Updated parts list!! SebastianJ Multirotor Drone Talk 2669 Dec 30, 2011 06:48 PM
Discussion What to do? Failed tricopter build! Razor_Racer Coaxial Helicopters 9 Mar 07, 2011 10:20 AM
Discussion Tricopter Build Razor_Racer Coaxial Helicopters 21 Feb 20, 2010 09:24 PM
Build Log Tricopter build SebastianJ VTOLs 1 Dec 22, 2008 05:34 PM
Discussion Trying to build a mechanically actuated tricopter, Help! stefalo Coaxial Helicopters 3 Jan 09, 2008 05:10 PM