Shop our Airplanes Products Drone Products Sales
Jan 21, 2013, 05:51 PM
Lets make it remote control!!!
abletowinginc's Avatar
Quote:
Originally Posted by Stunt Double View Post
I dont understand why people spend big bucks on 12v power supplys for chargers when you can use a PC PSU. Its not that much work to convert them over and most people here would be pretty good with a soldering iron. I wire up 12v into 2 separate XT60 connectors, it can run both my chargers at the same time no problems.
i just built my first power supply ever. always used a 12 volt battery in my garage. only took about an hour to set it up cleanly in a old toolbox with 2 chargers on it and didnt cost a penny. used a 12volt auto bulb instead of a load resistor works great
Sign up now
to remove ads between posts
Jan 21, 2013, 05:51 PM
Went to mow a meadow
frank48's Avatar
Quote:
Originally Posted by jbalat View Post
Hi guys just posting a video on Bluetooth if you are interested. Defintely worth the $9 that I paid from GoodLuckBuy
http://youtu.be/SpudeoTwy4w
Thats great, thanks, my BT got to heathrow on Saturday . Hopefully I'll get it in the next couple of days .... weather permitting

Frank
Jan 21, 2013, 09:41 PM
Registered User
Quote:
Originally Posted by abletowinginc View Post
i just built my first power supply ever. always used a 12 volt battery in my garage. only took about an hour to set it up cleanly in a old toolbox with 2 chargers on it and didnt cost a penny. used a 12volt auto bulb instead of a load resistor works great
I just got one of these for when I travel from ebay (Toshiba 15V 6A power supply).
Jan 21, 2013, 10:56 PM
Registered User
BigJimNZ's Avatar
John, some pice of the new H Quad. As you expected the other one had too much twist.
This one is like a rock. 700mm diagonal mtr to mtr.
Completed at 850grams without battery.

Name: ImageUploadedByTapatalk1358830484.194493.jpg
Views: 151
Size: 182.6 KB
Description:
Name: ImageUploadedByTapatalk1358830497.959260.jpg
Views: 147
Size: 121.4 KB
Description:
Name: ImageUploadedByTapatalk1358830512.042815.jpg
Views: 143
Size: 115.3 KB
Description:
Last edited by BigJimNZ; Jan 21, 2013 at 11:09 PM.
Jan 22, 2013, 03:04 AM
Registered User
It looks really tidy and low drag. I like it. should be very stable at that size
Are you back on your feet ?
When do you plan to finish it ?
Jan 22, 2013, 05:38 AM
Lets make it remote control!!!
abletowinginc's Avatar
Quote:
Originally Posted by BigJimNZ View Post
John, some pice of the new H Quad. As you expected the other one had too much twist.
This one is like a rock. 700mm diagonal mtr to mtr.
Completed at 850grams without battery.

Attachment 5469660
Attachment 5469661
Attachment 5469662
hey jim glad to see your up and fiddling around again look forward to see her fly
Jan 22, 2013, 07:56 AM
Flying a Chipmunk in Portugal
jhsa's Avatar
Hey Ian, that is looking very good.. and light.
Jan 22, 2013, 08:32 AM
Lets make it remote control!!!
abletowinginc's Avatar
Quote:
Originally Posted by jhsa View Post
Hey Ian, that is looking very good.. and light.
hey jhsa u following me? everythread i look at that i subscribe to there you are lol
Jan 22, 2013, 12:02 PM
Flying a Chipmunk in Portugal
jhsa's Avatar
I was there first, believe me ask the guys here. they'll tell you
Jan 22, 2013, 12:17 PM
Lets make it remote control!!!
abletowinginc's Avatar
Quote:
Originally Posted by jhsa View Post
I was there first, believe me ask the guys here. they'll tell you
lol i know you were just joshin you
Jan 22, 2013, 12:39 PM
Registered User
BigJimNZ's Avatar
Quote:
Originally Posted by abletowinginc View Post
lol i know you were just joshin you
Ah he sneaks around the place all the time ;-)
Jan 22, 2013, 12:44 PM
Flying a Chipmunk in Portugal
jhsa's Avatar
Ha Ha, I'm surprised you didn't say that I attack people with screwdrivers
Jan 22, 2013, 12:48 PM
Registered User
BigJimNZ's Avatar
Yep well and truly up and about thanks. Back to work next week though.

Sorry for posting the quad thing here but I know a couple of you fly them.
It flies well. I will post some video shortly.
The box section is from bunnings. The arms could easily be made from the 16 x 1 aluminium tube that Bunnings also stock.
Would be easier than the cf to work with.
@John, if you would like to make one of this design I will send you some motor mounts and clamps etc for the tube.
Just let me know what motors you are using.
Last edited by BigJimNZ; Jan 22, 2013 at 01:07 PM.
Jan 22, 2013, 12:50 PM
Registered User
BigJimNZ's Avatar
Quote:
Originally Posted by jhsa View Post
Ha Ha, I'm surprised you didn't say that I attack people with screwdrivers
Everyone knows its true heeeeeeeeeeeee
Jan 22, 2013, 01:38 PM
Flying a Chipmunk in Portugal
jhsa's Avatar
of course he he.. shall I post the video here??


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Yet another tricopter build. !!Updated parts list!! SebastianJ Multirotor Drone Talk 2669 Dec 30, 2011 05:48 PM
Discussion What to do? Failed tricopter build! Razor_Racer Coaxial Helicopters 9 Mar 07, 2011 09:20 AM
Discussion Tricopter Build Razor_Racer Coaxial Helicopters 21 Feb 20, 2010 08:24 PM
Build Log Tricopter build SebastianJ VTOLs 1 Dec 22, 2008 04:34 PM
Discussion Trying to build a mechanically actuated tricopter, Help! stefalo Coaxial Helicopters 3 Jan 09, 2008 04:10 PM