Thread Tools
Nov 13, 2009, 12:53 PM
boerie roll
vleisie's Avatar
Build Log

OO7 JET! (Depron Bede BD-5, with plans)


Here is my 6mm Depron Bede BD-5.

Depron BD-5 (1 min 45 sec)


Specs:
Span: 35"
Flying weight: 570g (with 2200mah lipo and rudder servo)
Motor: 2212-06 (2200kv)
Prop: APC 6x4E
ESC: 30A+
Lipo: 3S 1800mah or heavier required for balance
Servos: 2x 9g (3 with optional rudder)

CG position: 1/2" in front of centre of wing spar.

My control throws:
Aileron (measured at inboard corner): 17mm up, 25% expo
Elevator: 21mm up, 17mm down, 40% expo
Rudder (measured at base of fin): 35mm left, 35mm right, 30% expo

This model is relatively easy to build and looks pretty in the air. It does beautiful loops, aileron rolls and knife edge passes.

The only condition is that if you build one, you have to post a picture.

Marcel

PS. Thanks to Steve Shumate for some of the building techniques used in the design.

*****This plane is available as a short kit: *****
http://www.balsabuddies.com/cutouts/bbshop.htm
Last edited by vleisie; Feb 10, 2010 at 05:24 AM.
Sign up now
to remove ads between posts
Nov 13, 2009, 12:55 PM
boerie roll
vleisie's Avatar
The next set.
Last edited by vleisie; Jan 02, 2010 at 03:52 AM.
Nov 13, 2009, 01:06 PM
Registered User
adgnade's Avatar
Wow this is great any chance you could tile the plans
Nov 13, 2009, 01:46 PM
boerie roll
vleisie's Avatar
Not me, but maybe someone else could help out?
Nov 13, 2009, 02:09 PM
Registered User
Very nice! Where's the GC?
Nov 13, 2009, 03:09 PM
boerie roll
vleisie's Avatar
CG is 1/2" in front of centre of wing spar.
Nov 13, 2009, 03:10 PM
Registered User
WOW!! What about CG,please?
Nov 13, 2009, 03:25 PM
Winging it >
leadfeather's Avatar
Beautiful job! I always really liked the looks o the BD5.
Nov 13, 2009, 03:37 PM
Registered User
Ups!,I find CG.Thank you.
Nov 13, 2009, 03:53 PM
PSALM 14:1
Sammy70's Avatar
Wow, great looking BD and a nice size too!

Too many great plans/planes and not enough depron/time
Nov 13, 2009, 04:45 PM
USA, Massachusetts
rcflyer50's Avatar

Bd5


I gave it my best shot. My first attempt at tiling. Let me know its OK or I'm way off.
Nov 13, 2009, 05:58 PM
Registered User
adgnade's Avatar
I will print and put together and let you know thank for the help
Nov 13, 2009, 06:00 PM
SaR
SaR
Ausgezeichnet
SaR's Avatar
Very nice! Great plans, too. Any video?

Kent


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion BEDE BD-5 Plans? LANMAN Foamies (Scratchbuilt) 10 May 03, 2015 11:54 AM
Plans or kit for Bede BD-10 EDF byrocat Foamy EDFs 24 Jan 12, 2015 09:05 PM
Sold Teltech BD-5 pusher jet NIB gliders Aircraft - Electric - Airplanes (FS/W) 5 Sep 07, 2009 10:42 PM
Wanted BeDe 5 BD-5 airplane, Cermark, HobbyClub etc. gliders Aircraft - Electric - Airplanes (FS/W) 3 Apr 01, 2007 07:06 AM
Bede BD-5 3 views (or six view) wanted. bipeflyer Electric Ducted Fan Jet Talk 14 Aug 05, 2002 11:11 PM