Here is my Revel CM191 micro, with added proportional controls- a small 3.7g servo for steering and a servo board as ESC.

Now THAT is cute!

Onboard video

RC Cars Roam a Tiny Toronto | Episode 6 | Onboard (1 min 16 sec)

Took it out on the ice and it was a great time. I actually think my home made studded tires performed pretty good.

This little truck always out a smile on my face

Wltoys A979B on the ice (3 min 12 sec)

Dude. That is some sick drifting for a WLToys monster truck

1:47 - 1:57, ace.

Onboard police response from the previous police video

Canine Unit POV response | RC Cars Roam a Tiny Toronto | Episode 7 (0 min 44 sec)

Some tweaks to the wee Carisma:

Buggy tyres - they look daft being a lot smaller, but are much slicker, and much better on the carpet indoor track I've been visiting.

New bodyshell to try to match the tyres. Pretty pleased with the colour fade on this one. Annoyingly the complete decal set didn't completely include the windows - why on earth not??

New homemade bumper, the old one got more fragile and torn off in a crash, then I broke the suspension arms twice in a row so I really needed a replacement, new one is wider and reinforced around the screwholes.

Work in progress, 3D printing a legendary TAMIYA Hotshot kit on 1:24 scale platform.

What chassis are you using? Looks good.

Originally Posted by Brake Weight

What chassis are you using? Looks good.

Its 1:24 Subotech chassis, its outline structure and layout looks similar to classic 1:10 Tamiya buggy. You can find out more about Subotech chassis here: https://www.supermotoxl.com/designs-...24-scale-truck

Btw post some updates, now it looks stunning and almost exact replica of classic TAMIYA HOTSHOT. Sweet! Tomorrow will do some cockpit 3d printing and paint works. Got the sticker ready too.

Done! My 3d printed 1:24 scale TAMIYA HOTSHOT kit completed and ready to run.

Work in progress - TAMIYA BOOMERANG

50% WIP 3d model, 3d printing and setup, still have to work on its rear spoiler parts and etc.

Photos:

Looking excellent How much fabrication time to clean up the pieces when printed?

That will takes about 9 hours of printing full kit for the HOTSHOT and 12 hours on the BOOMERANG.

FPV Setup