Thread Tools
This thread is privately moderated by rcphreak, who may elect to delete unwanted replies.
Nov 26, 2009, 01:39 AM
Registered User

1/28th Pan Car


This is my 1/28th Micro Pan car Build.
It did 46.6MPH on the Tamya Speed Checker.
Paint the body Next.
Cheers, John W.

more Here: http://addictiverc.ning.com/

AddictiveRC Pan Car Speed Test Video.wmv (0 min 15 sec)
Last edited by johnIn2SonAZ; Nov 26, 2009 at 06:10 AM.
Sign up now
to remove ads between posts
Nov 26, 2009, 02:26 AM
dNaNo eXperT
NanoTrax's Avatar
that joint is sweet... looks like a rocket
Nov 26, 2009, 03:53 AM
Registered User
Yeah I had a really Hard time keeping tires in the rims even with glue they would just jump off the rims...lol.
I went to larger Over-all Diameter Foam Tires.
Thanks, JohnW
Nov 26, 2009, 04:58 AM
in memory of dez RIP
rcphreak's Avatar
ok finaly got some pics i got humpty dumpty back togather agin .
the color on the chassis was changed with a sharpie . if you handel it a bunch it will start to rub off but after assembly you just touch it up and it good .

my sons is bone stock ,

mine has ,

integy extended chassis ( makes it a dt )

alloy shock towers

alloy hinge pin mounts

alloy rear hubs

losi 180 mah lipo

bb2 motor is on the way .

hope you like .
Nov 26, 2009, 10:24 AM
jettrooper02's Avatar
sweet cars!
Nov 26, 2009, 10:51 AM
Master Chief
shin's Avatar
Very nice cars
Wonderful
And i cast my vote YES to making this a sticky
Nov 27, 2009, 12:58 AM
Registered User

Nice Micro-Trucks


Quote:
Originally Posted by rcphreak
ok finaly got some pics i got humpty dumpty back togather agin .
the color on the chassis was changed with a sharpie . if you handel it a bunch it will start to rub off but after assembly you just touch it up and it good .

my sons is bone stock ,

mine has ,

integy extended chassis ( makes it a dt )

alloy shock towers

alloy hinge pin mounts



alloy rear hubs

losi 180 mah lipo

bb2 motor is on the way .

hope you like .
Very Nice!
Nov 27, 2009, 06:40 AM
Dan Green
How do you vote a sticky thread. Where is it on the page???
Nov 27, 2009, 08:06 AM
in memory of dez RIP
rcphreak's Avatar
it will not let me make it a poll now id have to start a new one .
Nov 27, 2009, 07:46 PM
jettrooper02's Avatar
go to first post and click report this post to a moderater. then under options it wil say sticky this thread.
Nov 27, 2009, 08:01 PM
Dan Green
just reported you for spam because you asked people to stick it. sorry
Nov 27, 2009, 08:02 PM
Dan Green
just kidding, i requested it as a stciky, i'm going to make an officail mini-t thread when i get my mini-t chat and i hope that you will vote it to be stuck!
Nov 29, 2009, 08:45 PM
Registered User
Here are my rc18s.
Both of them are RC18T. The upgrades are as followed.

GPM chassis
RPM Arms
3Racing towers, bumper, and shocks (the short ones for both front and rear)
All aluminum hubs, knuckles, diff case, upper deck
1/10 wheels and adapters
CVD front and rear
MIP steel diff outdrives front and rear (stock diff and input gears still holding up)
Dynamite C4 9200kv
Mamba Micro Pro
Hitec 65HB servo
DP Drag Link
Titanium turnbuckles
Electrifly 11.1v 2100mAh 20c
Esky Helicopter Gyro
JConcepts Illuzion Body

Here is the list for the other one.

Stock chassis, upper deck, hubs, and knuckles
TheToyz wide arms and wide CVD
Mini LST wheel adapters and wheels/tires
Stock RC18R towers and body posts
3Racing Shocks (the long ones for both front and rear)
GPM Diff Outdrives with Steel Diff and input gear
Hitec 65HB servo
Losi Xcelorin 7400kv
EZrun 25amp ESC Ver. 2
Zippy FlightMax 11.1v 1800mAh 20c
DP Geepers Body
Last edited by jygwkuo; Nov 29, 2009 at 10:40 PM.
Nov 29, 2009, 08:49 PM
Master Chief
shin's Avatar
Those are superb vehicles
Hank


Thread Tools