Thread Tools
Nov 03, 2009, 05:08 AM
flying beam
blackmoon's Avatar
Hi Flyboone,

Will they be CE compliant or FCC only ?

Because here in Europe customs are sometimes a "little" twitchy with compliance.

Or should we expect CE compliant ones in sale in Europe ?

Thank you.
Sign up now
to remove ads between posts
Nov 03, 2009, 06:37 AM
Registered User

more detail needed


Jason,
Can you post more detail, such as servos,is Tx mode 1 or 2?
Robert
Nov 03, 2009, 07:39 AM
Checking CG is for NERDS!
Smokescreen38's Avatar
..and will there be more models in the series?

I'm psyched for the spitfire.
Nov 03, 2009, 08:46 AM
RCG Staff
Jason Cole's Avatar
Hey guys,
Attached is a photo showing the receiver/servo brick. The tranny is mode 2 and it is FCC and CE compliant. We will have some more models coming next year.

Thanks,
Jason Cole
Hobby Lobby
Nov 03, 2009, 11:42 AM
Software always has bugs
Quote:
Originally Posted by Flyboone
Hey guys,
Attached is a photo showing the receiver/servo brick. The tranny is mode 2 and it is FCC and CE compliant. We will have some more models coming next year.

Thanks,
Jason Cole
Hobby Lobby
Why do you have to wait until next year? We have a few month to go to the end of this year. By that time, HH should have more models to choose from. Do you carry any parts of your model? Thanks.
Nov 03, 2009, 01:06 PM
Doing it in the Lateral Axis
modfly's Avatar
Quote:
Originally Posted by modfly
Actually what makes this plane interesting to me is that the radio gear is different. If it has separate servos then they must be very small. I kind of like the idea of separate servos as long as they are light weight and small. I will get one or two just because its different and new.
Ok, its a brick and the servos are part of the receiver. These are conventional type design servos with gears.
Nov 03, 2009, 04:46 PM
Registered User
Petefoss's Avatar
Quote:
Originally Posted by Flyboone
We are shipping out today. I will have a bunch for sale up at the JR Indoor Festival this weekend as well.

Jason
Look forward to flying one this weekend Jason. Glad they fly as well as the preproduction version we saw a few weeks ago. If you haven't shipped David Wendt's to him I'd be glad to carry it back to him and save you the shipping cost. I promise I won't fly it (fingers crossed)!
Nov 03, 2009, 05:29 PM
RCG Staff
Jason Cole's Avatar
Thanks for offer Pete. I already wrote up the order though. We do have a full line of spare parts here right now. We'll get them up on the website asap.

Thanks,
Jason Cole
Nov 03, 2009, 07:14 PM
"Aircraftus Fragmentum"
kydawg1's Avatar
Quote:
Originally Posted by modfly
You can never have too many mustangs
I second that.
Nov 03, 2009, 07:48 PM
Registered User
Torx's Avatar
are stores gonna carry these? or is this a website only buy?
i worry about buying fragile planes like this online, because of shipping mishandling.
Nov 03, 2009, 07:56 PM
One of the usual suspects
Vicarious's Avatar
Quote:
Originally Posted by modfly
Ok, its a brick and the servos are part of the receiver. These are conventional type design servos with gears.
I put the image of the eRC brick above a new Hobbico Playmate brick. I think they look pretty similar. I wonder if the electronics come from the same factory or the same designer. And might they work with each others TX...?
Nov 04, 2009, 10:58 AM
**I'm Battman**
RCBABBEL's Avatar

direct competitor to Parkzone Ultra Micro?


A simple NO.

Proof right here...

https://www.rcgroups.com/forums/show...0&postcount=40


rc
Nov 04, 2009, 11:43 AM
Bruno, GOOD DOG
A Rdnek's Avatar
Quote:
Originally Posted by RCBABBEL
A simple NO.

Proof right here...

https://www.rcgroups.com/forums/show...0&postcount=40


rc
Yes, I read that, and I like what they are saying and I probably will get one, IF that transmitter turns out to be OK.
I ended up getting a RTF Parkzone UM-P51 because no one had BNFs at the time. Just for kicks I bound up the RTF transmitter last Sunday and it handled HORRIBLE. After a few minutes I went back to the DX7.
I wonder if HL will eventually come up a six or 7 channel computer radio when some model memory, of there own to support these planes?
I know I would get them if they did that.
Ron
Ron
Nov 04, 2009, 12:17 PM
Registered User
reverse.sensin's Avatar
It would be better if HL just made DSM2 compatible BNF aircraft
Nov 04, 2009, 12:20 PM
Doing it in the Lateral Axis
modfly's Avatar
Quote:
Originally Posted by Vicarious
I put the image of the eRC brick above a new Hobbico Playmate brick. I think they look pretty similar. I wonder if the electronics come from the same factory or the same designer. And might they work with each others TX...?
the receivers look very similar for sure. Can you link the Playmate plane?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Alert Parkzone Ultra Micro P-51 LVC pulses the motor before it should modfly Micro Ready-to-Fly 1099 Jun 02, 2011 08:48 PM
Discussion Hobby Lobby Micro P-51 and Spitfire Petefoss Scratchbuilt Indoor and Micro Models 3 Oct 25, 2009 04:38 PM
Sold Parkzone Ultra Micro P-51 RTF PatternFlyer Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 4 Oct 07, 2009 06:09 PM
New Product Parkzone Ultra-Micro P-51 BNF tallflyer Foamies (Kits) 5 Sep 05, 2009 11:20 PM
New Product Parkzone Ultra Micro P-51! 4ch DSM2 control! BNF and RTF! all4smallrc Scratchbuilt Indoor and Micro Models 2 Aug 29, 2009 02:16 PM