Thread Tools
Oct 30, 2009, 08:17 AM
Registered User
baum58's Avatar

turnigy 30a plush programming help with a 400/500 outrunner

hello all, I need somme help to programm my HK 450 ( T-rex clone)

Iam using turnigy plush 30a with a trunigy 500/4000 outrunner. I need to know if the factory setup needs to be changed and if ... to what settings

Sign up now
to remove ads between posts
Oct 30, 2009, 08:20 PM
Registered User
MrRetro's Avatar
You should verify the default settings at the very least. You can do it with the beep beep codes if you check the instruction sheet, but it's a HECK of a lot easier and faster with the $7 programming card.
Oct 31, 2009, 07:07 AM
Registered User
baum58's Avatar
thanks, I guess I will have to get one of the programming cards......

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion problem with turnigy 30A plush esc Ospreyman Power Systems 2 Oct 23, 2009 03:12 AM
Sold Turnigy Plush 30A ESC like new (only 4 weeks old) - $25 Shipped MJB9 Aircraft - Electric - Power Systems (FS/W) 1 Oct 19, 2009 11:34 PM
Sold Turnigy Plush 30a ESC and Esky 3800kv Outrunner homeytwist Aircraft - Electric - Power Systems (FS/W) 0 Sep 21, 2009 09:54 PM
Wanted HobbyCity Turnigy plush 30amp & 18amp esc's and also a Turnigy 2830 outrunner 3500kv HyperHelis Aircraft - Electric - Power Systems (FS/W) 5 Jul 06, 2009 10:25 PM
Sold TURNIGY 35-48-A 1100kv Brushless Outrunner w/TURNIGY Plush 60amp esc DuaneV Aircraft - Electric - Power Systems (FS/W) 1 Sep 22, 2008 06:38 AM