6mm depron for 24" Parkflyer Pete?? - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 30, 2009, 07:45 AM
Registered User
Discussion

6mm depron for 24" Parkflyer Pete??


Ive searched everywhere for the tiled A4 plans for a park flyer Pete but all I could find was tiled plans that were in US legal format. I dont have that paper so when I print it out part of it is cut off so I had to reuce the images by arond 85% to fit on A4.
It's made the wing span around 20" but I added 2 inches to that.

Can I make this plane with 6mm depron both the fuse and wing? I stumbled across another post where a 20" version of this plane was made and the 6mm depron was too thick for a wing. I do have 3mm depron but am worried it would be too flimsy for this.
Would appreciate some suggestions here.
Sign up now
to remove ads between posts
Oct 30, 2009, 08:43 AM
gpw
gpw
“There’s no place like Foam”
gpw's Avatar
Truman , we've even done a Mini Pete @ 17" WS... It flew much faster than the 36" one.. not nearly as Floaty ... 6mm should be just fine !!! Maybe somebody here could make a tiled set of plans for A4... or you could just do as I do and freehand in the missing bits on the larger version ...
Oct 30, 2009, 10:30 AM
Registered User
GPW, Thanks for the reply. Ive spent hours reading through the Parkflyer Pete threads 1 2 and 3, still going though them all but have learnt heaps from you and Gene and other talented people on here.
I didnt mind that I had to reduce it down to fit A4 as I wanted something a bit smaller anyway.

I want my 9 yr old son to be able to just throw it and fly it.

Ive ended up with a 22" fuse and a 28" WS. Do you think this will be okay? I have this motor and was thinking of putting it on this plane.

http://www.hobbycity.com/hobbycity/s...idProduct=5482

Not sure what prop to use though, any suggestions?

Thanks once again.
Oct 30, 2009, 12:19 PM
Registered User
IMO This: is a Better Motor http://www.hobbycity.com/hobbycity/s...trunner_2900kv
OR this: http://www.hobbycity.com/hobbycity/s...trunner_1700kv


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Help?? Looking for Parkflyer pete PDF Truman40 Foamies (Kits) 3 Oct 31, 2009 08:29 AM
Help! unwarping old 6mm Depron? maukabud Foamies (Kits) 0 Sep 16, 2009 11:37 PM
Discussion Funtana E400 parkflyer (6mm Depron) Appie 3D Flying 2 Dec 20, 2006 06:33 AM
Help! Good Source for Laser Cut Plywood Control Horns for 6mm Depron? Bajora Electric Plane Talk 5 Mar 14, 2006 09:37 AM
Depron 6mm For Sale , HB CA area hotairflyer Aircraft - Electric - Airplanes (FS/W) 0 Dec 30, 2003 02:34 PM