Robbe Arcus Sport or....
The Robbe Arcus Sport is almost similar to this one.
There are differences though:
Specs Robbe Arcus Sport:
Wingspan: 2600 mm
All-up weight: 2000 g
Wing area: 58.00 dm
Wing Loading: 34.40 g/dm2
Length: 1500 mm
camber-changing / landing flaps,
Specs ArtTech 2500:
Wingspan: 2500mm (98.4 inch)
Length: 1500mm (59 inch)
Wing Area: 55dm2
Wing Loading: 35g/dm2
Flying Weight: 1900g (67 oz)
Drive System: Brushless outrunner motor A3720
Speed Controller: 60amp brushless ESC
Servo: 6X 9g high speed micro servos
Battery: 14.8V 4S 2500mAh 20C Li-Po
Control system: 6 CH 2.4GHz Multifunctional Transmitter and Receiver
Radio Control Range: 3000 feet (1000m)
The Robbe is bigger, the Diamond 2500 has a more powerful motor. Robbe has a quality name to protect though.
Which one to get......?
Last edited by BarnOwl; Apr 30, 2010 at 09:53 AM.
Well, I thought the 2500 was a clone from the Robbe as well. But on a German forum I read the opposite: Apparantly the Robbe was later on the market then the Art Tech.
Allthough the airframe Robbe uses is almost certainly from the same manufacturer, they do use their own electronics (But where do they come from....
I am very interested in this glider.
Can those who have received theirs tell me if the glider arrives with the
"paint splats" already applied?
If so, has anyone tried to remove them?
I'm interested in a more "scale" look and would want to try to remove the decals, but I dont want to tear the EPP surface.
Ive got mine today, and as Im not to fond of the graphics i started to peel them away at once. Those on the fuze and fin are easy to peel away, theres a big one on the top of the stab and its also easy to get a grip on, but those on the topside of the wings are really thin and fragile and there seems to be a coat of something over them as well. I scratched with my fingernail and they release in small pieces, not hard but will take some time, so I will have color fragments under my nails for a while.
please give me some hints:
Im pretty much a beginner but very fast learner
I own a place with a very large lawn and private lake and want to have a fun hobby when I go there (except the usual fishing, windsurfing, etc sports)
so Im thinking of buying a sailplane like the Robbe or the Artech ones seen here. It looks like fun! I want to have a videocam like the one here attached (http://hobbyfly.de/en/new-rc-product...-pnp-3450.html)
my question to you people (if you know anything = which I believe you do! is how difficult is it to fly these things and how and where do I buy a camera like in the video from hobbyfly.de?? also saw somewhere glasses which you wear and through which you see your flight real time which would be so cool. I would ideally like a plane that can fly very far, fast and that is robust enough to land on grass..and Im thinking video because I cant understand how you guys see the planes when they are 1mile south and 200ft up, I mean how do you even know which direction you are flying then??
btw. those jet planes can they land on grass or only tarmac?
Thanks folks if you can help me out here and please Im not looking for advice such as start with a beginner airplane etc.. I can afford to crash so I want something fun and impressive from the get go
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Art-Tech EF2000 any one have it||j3tman||Foamy EDFs||2||Oct 24, 2009 09:42 AM|
|Discussion||art tech spitfire bomb! (:||kieran3008||Electric Warbirds||2||Oct 15, 2009 05:57 PM|
|Help!||Art-tech Yak 54 Center of Gravity||Midknight69||Electric Plane Talk||3||Oct 14, 2009 09:21 PM|
|Discussion||art tech spitfire *****||kieran3008||Electric Warbirds||0||Oct 12, 2009 02:21 PM|