Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Mar 31, 2011, 06:50 PM
jfflyer is offline
Find More Posts by jfflyer
John Foltz
jfflyer's Avatar
Quote:
Originally Posted by CN I Dawg View Post
Hi All,

I have searched on-line for foam insert material to pad my Ground Station. It seems VERY expensive. For example, the replacement foam for a Pelican 1620 case is about $80. That is about 1/2 what the case costs!!
Appreciate any help on this.
http://www.thefoamfactory.com/packag...knpluckcr.html

2.5" thick x 18x20" eggcrate style grey foam (lids) $6.75.
2.5" thick x 18x20" solid grey foam (bases) $11.25
2.5" thick x 18.20" pick-n-pluck grey foam $12.50

Many other sizes and thicknesses.
Last edited by jfflyer; Mar 31, 2011 at 06:57 PM.
Sign up now
to remove ads between posts
Old Mar 31, 2011, 07:35 PM
Alpina540 is offline
Find More Posts by Alpina540
Fly Big, Low and Slow....
Alpina540's Avatar
Quote:
Originally Posted by CN I Dawg View Post
Hi All,

I have searched on-line for foam insert material to pad my Ground Station. It seems VERY expensive. For example, the replacement foam for a Pelican 1620 case is about $80. That is about 1/2 what the case costs!!
Appreciate any help on this.
lol.... I actually drew up my battery cutouts that I wanted in autocad and got some quotes for people to cut it for me.

Quotes for a single insert were 500+ dollars

So needless to say I cut my own.....

-Anson
Old Apr 01, 2011, 07:31 AM
CN I Dawg is offline
Find More Posts by CN I Dawg
Crash=start of next project
CN I Dawg's Avatar
Quote:
Originally Posted by jfflyer View Post
http://www.thefoamfactory.com/packag...knpluckcr.html

2.5" thick x 18x20" eggcrate style grey foam (lids) $6.75.
2.5" thick x 18x20" solid grey foam (bases) $11.25
2.5" thick x 18.20" pick-n-pluck grey foam $12.50

Many other sizes and thicknesses.
Thanks JFFlyer, I will give them a try. Much better than what I had been seeing!
Old Apr 01, 2011, 10:05 AM
nakelp86 is offline
Find More Posts by nakelp86
Nakelp
nakelp86's Avatar
Quote:
Originally Posted by CN I Dawg View Post
Hi All,

I have searched on-line for foam insert material to pad my Ground Station. It seems VERY expensive. For example, the replacement foam for a Pelican 1620 case is about $80. That is about 1/2 what the case costs!!
Appreciate any help on this.
Check upholstery places, they may not have black foam but have plenty scraps of white/yellow of different densities.
I usually get the scarps for free since they will end up in a garbage.
Old Apr 01, 2011, 12:52 PM
CaliDave is offline
Find More Posts by CaliDave
Registered User
CaliDave's Avatar
Quote:
Originally Posted by CN I Dawg View Post
Hi All,

I have searched on-line for foam insert material to pad my Ground Station. It seems VERY expensive. For example, the replacement foam for a Pelican 1620 case is about $80. That is about 1/2 what the case costs!!
Appreciate any help on this.
I thought this guy said it was about $20 to fit a Pelican with new foam. Not sure what size case that was... but around the size of a 1620. You could check. It's in NorCal tho so you'd pay sales tax and shipping which I'm guessing gets it pretty far from $20. Maybe the place by you would match his quote?
Old Apr 02, 2011, 09:38 AM
CN I Dawg is offline
Find More Posts by CN I Dawg
Crash=start of next project
CN I Dawg's Avatar
Quote:
Originally Posted by CaliDave View Post
I thought this guy said it was about $20 to fit a Pelican with new foam. Not sure what size case that was... but around the size of a 1620. You could check. It's in NorCal tho so you'd pay sales tax and shipping which I'm guessing gets it pretty far from $20. Maybe the place by you would match his quote?
Thanks CaliDave. This place looks good too. Now I have lay out everything so I don't over buy.
Old Apr 02, 2011, 10:51 AM
David22 is offline
Find More Posts by David22
Suspended Account
Here is another recent up date on my simple to use longer range ground station. flown long range no problem

This set up is for 1.2/1.3.

very mobile ground station opperates min. 2 hours
Old Apr 07, 2011, 03:18 PM
aaron_gx is offline
Find More Posts by aaron_gx
Flying FPV from the lab.
aaron_gx's Avatar
david - you and your yellow tape... never seen anyone else use it.
Old Apr 08, 2011, 10:41 AM
El1m1nate is offline
Find More Posts by El1m1nate
Registered User
isnt that kapton? In that case, its a good thing he is using it
you put your soldering iron on it, and it wont melt for 10+ secs!
Also, the stuff i got sticks more than regular sticky tape..

its good stuff ^^
Old Apr 12, 2011, 08:56 PM
aaron_gx is offline
Find More Posts by aaron_gx
Flying FPV from the lab.
aaron_gx's Avatar
expensive? where do i get it? maybe david has some extra
Old Apr 13, 2011, 08:46 PM
El1m1nate is offline
Find More Posts by El1m1nate
Registered User
cheap, at least on ebay [and the one i got before was good quality].. if you get it from farnell, etc, its around $30
some examples : http://cgi.ebay.com/10-mm-x-100ft-Ka...item3cb6a5a7f1
http://cgi.ebay.com/20-mm-x-100ft-Ka...item3cb667a901
i would get some thin and some thick...
I better order myself some... i lost my [almost finished] tape.
Old Apr 15, 2011, 01:22 AM
timnilson is offline
Find More Posts by timnilson
timnilson's Avatar

timnilson: Lexan Ground-Station


Here is my Ground Station I just finished tonight. Inspired by the MK-Stefan Ground Station, the goal was to create a small GS that packs a punch and looks good. I wanted to be able to have everything on one tripod -- monitor, batteries, antenna & tracker, everything. The GS has a 7" monitor as well as Goggle connections for FatShark Goggles. The gear includes:

Video RX: ImmersionRC Duo5800
Distribution: ImmersionRC PowerBox
DVR: Not yet in
Antenna: 19db Patch and 9db Omni
Antenna Tracker: ImmersionRC EzTracker
Power: 2 redundant 5000mah Lipos

The hardest part of this build was to design and custom CNC manufacture the Lexan enclosure. Build log of this GS.

Lexan FPV Ground Station (1 min 41 sec)
Site Sponsor
Last edited by timnilson; Apr 18, 2011 at 04:46 PM.
Old Apr 15, 2011, 05:02 AM
msev is offline
Find More Posts by msev
Registered User
It would be nice if someone with the knowhow would make a list of suitable lcds for fpv and ways/solutions how to overcome the bluescreen of death problem.
Old Apr 15, 2011, 12:08 PM
CaliDave is offline
Find More Posts by CaliDave
Registered User
CaliDave's Avatar
Quote:
Originally Posted by timnilson View Post
Here is my Ground Station I just finished tonight. Inspired by the MK-Stefan Ground Station, the goal was to create a small GS that packs a punch and looks good. I wanted to be able to have everything on one tripod -- monitor, batteries, antenna & tracker, everything. The GS has a 7" monitor as well as Goggle connections for FatShark Goggles. The gear includes:

Video RX: ImmersionRC Duo5800
Distribution: ImmersionRC PowerBox
DVR: Not yet in
Antenna: 19db Patch and 9db Omni
Antenna Tracker: ImmersionRC EzTracker
Power: 2 redundant 5000mah Lipos

The hardest part of this build was to design and custom CNC manufacture the Lexan enclosure. Build log of this GS.

http://www.youtube.com/watch?v=ZSXf1k5nTtU
Great looking clean station! Like the old Apple computers it will be a pain to clean once dust gets in there, but... that's a ways off! It looks sweet. I'm wondering how you'll deal glare on the box since there is no hood for the monitor?
Old Apr 15, 2011, 12:20 PM
timnilson is offline
Find More Posts by timnilson
timnilson's Avatar
Quote:
Originally Posted by CaliDave View Post
Great looking clean station! Like the old Apple computers it will be a pain to clean once dust gets in there, but... that's a ways off! It looks sweet. I'm wondering how you'll deal glare on the box since there is no hood for the monitor?
Thank you CaliDave. The monitor is there just for back-up and passengers. The main viewing device are FatShark "base" goggles that plug into the side of the box where the volt meters are. I was not too concerned with glare for that reason.
Site Sponsor


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Show us your FPV / RVP ground Base set up in action Trackercal FPV Talk 94 Nov 05, 2010 11:21 AM
Discussion Show Us Your FPV Helo Set Up Trackercal FPV Talk 2 May 12, 2009 12:05 AM
Gallery Show us your Ground equipment setup a9amg FPV Talk 2 Dec 03, 2008 03:47 PM
go on show us your avatars mudlark Life, The Universe, and Politics 105 Dec 19, 2007 08:23 PM
Show us your choppers! sneu Electric Heli Talk 23 Dec 30, 2001 11:50 AM