New Products Flash Sale
Thread Tools
Old Apr 06, 2012, 04:49 PM
RemiWM is offline
Find More Posts by RemiWM
Registered User
Quote:
Originally Posted by SpookiePower View Post
Do you have a link to where you bought that lcd monitor ?

- Kim -
I bought it used for 500 NOK (about 85$). It is named UNITED, so if you google you will find it.
Sign up now
to remove ads between posts
Old Apr 06, 2012, 09:48 PM
crazyj is offline
Find More Posts by crazyj
MultiCopterPilot & Film Maker
crazyj's Avatar
Below are photos and specs of my older 1280 GS and my newly built 5.8 mini GS.

1280 GS specs:
Custom albumin case with:
~ Two +8db 1.2Ghz patch antennas
~ Two telescoping camera booms holding the patch antennas
~ Two 1.2Ghz Video RXs
~ Two 4000mah 3s lipo batteries in parallel
~ Two 12v Buck Inverters to power the VRXs and Diversity
~ Eagle Eyes Ground Station for video Diversity
~ Digital Voltmeter display panel for battery status
~ Three video, audio and 12v output for goggles, laptop, etc
~ Haier 10.2" LCD TV (runs off 12v)





5.8 GS Specs:
~ Pelican case "clone" #5 from Fry's Electronics
~ CarbonBird.com FPV DVR with screen
~ 5.8Ghz video RX with CarbonBird.com clover leaf antenna
~ Fat Shark 922 goggles
~ 5000mah 3s lipo
~ lipo cell monitor w/ alarm
~ Hobbkyking 5v UBEC (to power the DVR)
~ Camera tripod to hold the station up off the ground
Old Apr 08, 2012, 04:44 AM
KellyFPVER is offline
Find More Posts by KellyFPVER
I love to be above the clouds
I just added the RVGS to my ground station . so nice to have tracking again. the RVGS is being powered off my ground stations two sealed lead acid 12AH batteries throu a plug I made with an old 3s balance plug that fits into the RVGS .
Last edited by KellyFPVER; Apr 08, 2012 at 05:00 AM.
Old Apr 08, 2012, 05:08 AM
L14m is offline
Find More Posts by L14m
Registered User
L14m's Avatar
Hi KellyFPVER have you tested the rvgs for tracking and diversity and if so how did you find it?
Liam
Old Apr 08, 2012, 09:28 AM
nakelp86 is offline
Find More Posts by nakelp86
Nakelp
nakelp86's Avatar
Quote:
Originally Posted by KellyFPVER View Post
I just added the RVGS to my ground station . so nice to have tracking again. the RVGS is being powered off my ground stations two sealed lead acid 12AH batteries throu a plug I made with an old 3s balance plug that fits into the RVGS .
does the tracker works with only RVOSD?
Old Apr 08, 2012, 03:45 PM
KellyFPVER is offline
Find More Posts by KellyFPVER
I love to be above the clouds
Quote:
Originally Posted by L14m View Post
Hi KellyFPVER have you tested the rvgs for tracking and diversity and if so how did you find it?
Liam
its the best damb system I have ever tried ! both tracking and diversity work better then most out there . the Happy killmore GS part of it we are still waiting on a up date for . and yes it only works with the RVOSD because thats what overlays the hidden line of video that it uses to send all the data.
diversity is so clean and tracking is right on target and can be very fast! pluse its as easy as 123 to set up and just fly.
Old Apr 09, 2012, 01:40 PM
tesco is offline
Find More Posts by tesco
Registered User
Here is my humble effort completed today.

Only thing you can't see is a connector towards the base on the side of the case that I plug the Fatsharks into.

Final upgrade will be to transmit the 2.4 vid signal on to the goggs via 5.8Ghz. Sure will look odd having a case set down somewhere with a tracking antenna spinning on top!
Old Apr 09, 2012, 09:06 PM
bakchos is offline
Find More Posts by bakchos
WannaBeLikeJoshTheSlowJet
bakchos's Avatar

My ground station V2


Let me share my ground station V2 ;

After getting 2.4 for video on my planes i needed 1.2 for my quad because i am flying on 2.4, so i had to make it all together.
  • Home depot case with recycled laser level tripod
  • 5A 12volt sealed pb batt
  • EagleEye diversity
  • 2x 1.2ghz video rx
  • 2x 2.4ghz video rx
  • 1 patch and 1 omni for each frequency
  • frequency select switch
  • vupoint recorder
  • 5.8ghz 20mw vtx to send image to fatshark's
  • external audio/video jacks
  • 7" liliput lcd monitor recycled from old CarPc project
  • switch to select onboard power or outboard using the back plug and extension cable with cig plug

Let the pictures talk for themself ;











Old Apr 09, 2012, 11:43 PM
Adidas4275 is offline
Find More Posts by Adidas4275
manual flying apologist
Adidas4275's Avatar
looks nice!
Old Apr 10, 2012, 12:50 AM
Stunt Double is offline
Find More Posts by Stunt Double
Registered User
Does look good, i like the twin frequency setup too.
Old Apr 10, 2012, 01:22 AM
NorCalMatCat is offline
Find More Posts by NorCalMatCat
FPV Electronics For Life!
NorCalMatCat's Avatar
I plan on doing led switches on my setup, I am curious... are you just using raw power being fed through it for the lighting? I've noticed some switches have separate leg for LED and some don't, also anyone have a good link for cheap led switches? Everywhere local is around $3 to $12 each.
Old Apr 10, 2012, 05:13 AM
ssancho is offline
Find More Posts by ssancho
Registered User
Quote:
Originally Posted by tesco View Post
Here is my humble effort completed today.

Only thing you can't see is a connector towards the base on the side of the case that I plug the Fatsharks into.

Final upgrade will be to transmit the 2.4 vid signal on to the goggs via 5.8Ghz. Sure will look odd having a case set down somewhere with a tracking antenna spinning on top!
Great platform tesco!! How about the pan-tilt system on the side of the case. Can you post more detailed images?

Thanks!!!


Regards...
Old Apr 10, 2012, 08:06 AM
tesco is offline
Find More Posts by tesco
Registered User
Quote:
Originally Posted by ssancho View Post
Great platform tesco!! How about the pan-tilt system on the side of the case. Can you post more detailed images?

Thanks!!!


Regards...
No problem, its just 2 x 360 winch servos, one is hotglued to the side of the case. The other is hotglued onto the servo arm so it can be pushed on when setting up.

Plenty of power in them to move the antenna.
Old Apr 10, 2012, 09:46 AM
ssancho is offline
Find More Posts by ssancho
Registered User
Quote:
Originally Posted by tesco View Post
No problem, its just 2 x 360 winch servos, one is hotglued to the side of the case. The other is hotglued onto the servo arm so it can be pushed on when setting up.

Plenty of power in them to move the antenna.
Thanks tesco!!! Really great and economical idea. Probably I'll copy it, if you're agree


Regards...
Old Apr 10, 2012, 10:31 AM
tesco is offline
Find More Posts by tesco
Registered User
Quote:
Originally Posted by ssancho View Post
Thanks tesco!!! Really great and economical idea. Probably I'll copy it, if you're agree


Regards...
So long as you know I own the worldwide patent


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Show us your FPV / RVP ground Base set up in action Trackercal FPV Talk 94 Nov 05, 2010 11:21 AM
Discussion Show Us Your FPV Helo Set Up Trackercal FPV Talk 2 May 12, 2009 12:05 AM
Gallery Show us your Ground equipment setup a9amg FPV Talk 2 Dec 03, 2008 03:47 PM
go on show us your avatars mudlark Life, The Universe, and Politics 105 Dec 19, 2007 08:23 PM
Show us your choppers! sneu Electric Heli Talk 23 Dec 30, 2001 11:50 AM